Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 9206012

Bioemulsans: microbial polymeric emulsifiers.

E Rosenberg·E Z Ron
View original source ↗Export metadata ↓

Abstract

Bioemulsans are amphipathic proteins and/or polysaccharides that stabilize oil-in-water emulsions. Bioemulsans are produced by a wide diversity of microorganisms and have potential applications in the food, paper, paint, bioremediation, agriculture, detergent and cosmetics industries. The production of the RAG-1 emulsan has been studied in batch-fed fermentors via self-cycling fermentation and with immobilized cells using a Celite support matrix. Bioemulsans have several advantages over lower molecular weight emulsifiers presently used in industry. The last few years have seen a number of new bioemulsans described with commercial applications.

Explore related subjects

AzotobacterBiotechnologyExcipientsFermentationPolysaccharides, BacterialJournal ArticleResearch Support, Non-U.S. Gov'tReview

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E Rosenberg, E Z Ron. 1997. Bioemulsans: microbial polymeric emulsifiers.. https://doi.org/10.1016/s0958-1669(97)80009-2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Novel bioconversion of wheat straw to bio-organic fertilizer in a solid-state bioreactor.

In order to increase the eco-efficiency and overall availability of naturally renewable resource, the novel bioconversion of steam-exploded wheat straw to bio-organic fertilizer containing N(2)-fixer, P and K solubilizers was investigated. The conversion was performed in solid-state fermentation (SSF) with periodic air-forced pressure oscillation (PAPO). The results showed that SSF-PAPO was competitive with the conventional solid-state fermentation (cSSF) in biomass accumulation and wheat straw digestion. With solid-liquid ratio 1:3, microbial biomass production at 72 h was high up to 2 x 10(11) cfu g(-1), nearly twice as that in cSSF. The degradation rate of cellulose, hemicellulose and lignin after fermentation in SSF-PAPO reached 48.57 +/- 10.66, 84.77 +/- 2.75 and 2.15 +/- 10.11, respectively, which was greater than that of 29.30 +/- 10.28%, 33.47 +/- 4.85% and 0.53 +/- 9.07% in cSSF, correspondingly. The SSF-PAPO system displayed unique advantage, by a novel gas phase control strategy on gas concentration and heat gradient, on the bioconversion of wheat straw to the bio-organic fertilizer.

Azotobacter↗
PubMed2006

Incorporation of polyethylene glycol in polyhydroxyalkanoic acids accumulated by Azotobacter chroococcum MAL-201.

Azotobacter chroococcum MAL-201 (MTCC 3853), a free-living nitrogen-fixing bacterium accumulates poly(3-hydroxybutyric acid) [PHB, 69% of cell dry weight (CDW)] when grown on glucose and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [PHBV with 19.2 mol% 3HV] when grown on glucose and valerate. Use of ethylene glycol (EG) and/or polyethylene glycols (PEGs) of low molecular weight as sole carbon source were detrimental to A. chroococcum growth and polymer yields. PEG-200, however, in the presence of glucose was incorporated into the polyhydroxyalkanoate (PHA) polymer. Addition of PEG-200 (150 mM) to culture medium during mid-log phase growth favored increased incorporation of EG units (12.48 mol%) into the PHB polymer. In two-step culture experiments, where valerate and PEG simultaneously were used in fresh medium, EG was incorporated most effectively in the absence of glucose, leading to the formation of a copolymer containing 18.05 mol% 3HV and 14.78 mol% EG. The physico-mechanical properties of PEG-containing copolymer (PHBV-PEG) were compared with those of the PHB homopolymer and the PHBV copolymer. The PHBV-PEG copolymer appeared to have less crystallinity and greater flexibility than the short-chain-length (SCL) PHA polymers.

Azotobacter↗
PubMed2006

Subsurface biobarrier formation by microorganism injection for contaminant plume control.

The concept of an in situ mixture of residual soil and aerobic microorganisms as a biobarrier for controlling contaminant plume was evaluated in this study. Azotobacter chroococcum was inoculated into soil with oxygen as the electron acceptor and appropriate substrate to induce biofilm clog soil pores. The hydraulic conductivity of soil decreased by 1/8000 while substrate and oxygen were provided to the injected microorganism, and increased by 400% when no substrate was provided. A series of column experiments were carried out to measure the hydraulic conductivity of soil specimens. The results showed that the highest hydraulic conductivity reduction occurred when the substrate and electron acceptors were first introduced, and this reduction increased toward the outlet of the column. The substrate was consumed mostly at the inlet and was distributed with time. The analysis of volatile substances after the test showed that the inlet had a high organic content and the outlet had a low organic content.

Azotobacter↗