PubMed · 905756
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
F M Bowers, S G Ellis. 1977. Simple multisample stage for the scanning electron microscope.. https://doi.org/10.1063/1.1135195
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Polycrystalline silver catalysts are used extensively for the partial oxidation of methanol to formaldehyde, which is then primarily incorporated in the synthesis process for adhesives and resins. In order to maximize formaldehyde production it is essential to gain a comprehensive understanding of the complex microstructural changes which occur in the catalyst during reaction conditions. However, conventional electron microscopic techniques are incapable of imaging catalysts at high temperatures and in the presence of a gaseous atmosphere. Therefore, an environmental scanning electron microscope (ESEM) has been used to image polycrystalline silver catalysts during simulated industrial conditions. The most dramatic effect of heating various catalysts to 700 degrees C in the ESEM chamber was the formation of "pinholes" in the silver surface. These "pinholes" occur at specific temperatures and are inherently associated with the catalytic process, resulting from near-surface explosions caused by subsurface hydroxyl recombination. Of particular interest was the nature and location of the holes, which preferentially occur in the vicinity of surface defects such as platelets and edge structures. To the best of our knowledge, this study represents the first time that the progress of a catalytic reaction has been observed under in situ conditions by scanning electron microscopy.
Ultra high molecular weight polyethylene wear debris is believed to have a major role in aseptic loosening of prosthetic joints. In order to study the cellular and host response to this and other such particulate debris, a source of fine ultra high molecular weight polyethylene debris is needed. We have described a technique to fracture the GUR 4150 primary ultra high molecular weight polyethylene grain, which reproducibly generated particles less than 1 micron in size. Furthermore, the particle morphology was similar to that of ultra high molecular weight polyethylene particles generated in vivo and retrieved from interfacial tissues. The fabricated polyethylene particles ranged from 0.1 to 33 microns in diameter, with a mean of 2.3 +/- 0.2 micron. Sixty percent of the particles were smaller than 1 micron and 90% were smaller than 7 microns. Using filtration and sedimentation, it is possible to acquire finer particle fractions. These particles are currently being used for biological response studies.
A simple digital method of measuring the performance of detectors in the scanning electron microscope (SEM) is described. The value derived is absolute and can therefore be used to compare both different detectors on the same instrument as well as different detectors on different instruments. The technique can be applied to secondary electron, backscattered electron, and energy-dispersive x-ray detectors. Examples are given of measurements made on a variety of commercial detectors installed on a number of current SEMs.