PubMed · 8795342
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
A Dobson, C Clarke. 1996. A sticky problem with a guide wire.. https://doi.org/10.1111/j.1365-2044.1996.tb07919.x
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Explore the source record for details and available documents.
RATIONALE AND OBJECTIVES: The authors performed this study to evaluate the use of an antecubital venous approach for inferior vena cava (IVC) filter placement. MATERIALS AND METHODS: An IVC filter was placed in 26 patients (15 men, 11 women) in whom the antecubital vein was the preferred access site. An antecubital vein was accessed with ultrasound guidance and used for IVC filter placement. This same access site was used to place a peripherally inserted central catheter (PICC) in 17 of the 26 patients. Access was obtained via the basilic vein in 15 patients (58%), brachial vein in eight (31%), and cephalic vein in three (12%). RESULTS: The IVC filter was successfully placed in the infrarenal vena cava in all 26 patients (100%) by using an antecubital vein for access. All filters deployed appropriately without complication. No complications occurred during PICC placement. CONCLUSION: The IVC filter can be safely placed via an antecubital vein. When clinically necessary, this site can provide convenient access for the PICC placement.
Myocardial perfusion imaging using Gd contrast agents is typically performed with bolus injections of the contrast agent using a power injector to provide for consistent and sufficiently rapid injection rates for all patients. For protocols in which a peripheral venous injection is called for (e.g. antecubital vein) injection catheters of 18 ga are used where vessel geometry permits. In some patients, particularly women with smaller veins, 20 and 22 ga catheters are used. The effect of catheter size and pressure tubing length can result in high injection pressures that occasionally cause leakage or connector failure. The viscosity of the contrast agent also impacts injection pressure. In this study, a simulation of the injection pathway was constructed with time resolved pressures measured at two points in the pathway. Pressure drops were calculated for a typical MR perfusion injection protocol.