Real time frequency domain fibreoptic temperature sensor using ruby crystals.

Abstract

The excited state phosphorescence lifetime of ruby crystals is used to monitor temperature in the physiological range from 15 degrees to 45 degrees C with precision and accuracy less than 1 degree C, in real time. Precision of 0.1 degree C is attained with 3 min integration times. A 500 micron cubic ruby crystal bounded to the distal end of an optical fibre of similar core dimensions is excited with pulsed Ne-He laser light of about 9 microW average power. The instrument uses a sampler for data acquisition, and frequency domain methods for data fitting. The instrument amplifies the a.c. components of the detector output and band limits the signal to 800 Hz. The fundamental frequency of the excitation is set to 24.41 Hz to obtain 32 or less harmonics. This band-limited signal is sampled and averaged between 20 and 100 cycles to obtain temperature measurements in real time. The frequency domain representation of the data is obtained by employing fast Fourier transform algorithms. The phase delay and the modulation ratio, of each sampled harmonic, is then computed. Five to 32 values of the phase and modulation are averaged before computing the sensor lifetime. The technique is capable of measuring precise and accurate excited state lifetimes from subpicowatt luminescent signals in plastic optical fibres. A least squares fit yields the lifetimes of single exponentials. A component of zero lifetime is introduced to account for the backscatter excitation seen by the photodetector leaking through optical interference filters. The phosphorescence lifetimes measured reproducibly to about six parts in 1000, with a 2 s integration time, are used to monitor physiological temperature. Temperatures are computed employing empirical polynomials. The system drift is 3% over 5 h of continuous operation. The instrumentation and methods allow 2.7 s update times and 50 s full response times.