Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 849131

Voice controlled wheelchair.

J A Clark·R B Roemer
View original source ↗Export metadata ↓

Abstract

A voice recognition and control system for use by quadriplegics and other severely physically disabled individuals in controlling a wheelchair has been developed and tested. Several wheelchair compatible features are included in the design--low power consumption (approximately 20 watts), small size (10"x11"x14"), low weight (approximately 22 lb), and no need for wheelchair modification (existing joystick control cable plugs directly into this system). The current system uses an eight word vocabulary (e.g., "forward," "slower," "right,") and a feedback control system to maintain the chair speed and direction. A recognition rate of more than 90% has been attained in laboratory tests with experienced speakers. Future system improvements are planned to increase the recognition rate and practical utility of the chair. The results of laboratory tests with normal and quadriplegic subjects indicate that voice commands are potentially a useful and practical means of wheelchair control. The effects of environmental noise are investigated and found to be minimally deleterious.

Explore related subjects

Biomedical EngineeringElectronicsVoiceWheelchairsJournal ArticleResearch Support, U.S. Gov't, Non-P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J A Clark, R B Roemer. 1977. Voice controlled wheelchair.. https://pubmed.ncbi.nlm.nih.gov/849131/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗