Test methods to simulate high-temperature exposure.

N de Kruijf; R Rijk

doi:10.1080/02652039409374219

Home/Archive/PubMed

PubMed · 8039581

Test methods to simulate high-temperature exposure.

N de Kruijf·R Rijk

View original source ↗Export metadata ↓

Abstract

A study was carried out to compare the actual overall migration from packaging materials into food simulants during heating in a microwave oven, and the overall migration from these materials into food simulants applying time and temperature conditions stipulated in the current EC and Dutch legislation on food packaging. It was demonstrated that the requirement by some food packaging regulations to conduct migration tests in a conventional oven using test conditions that are more stringent than the conditions occurring in practice results in excessively severe and unreasonable test conditions. On the basis of the results obtained additional test conditions (e.g. 30 min and 1 h in combination with test temperatures exceeding 121 degrees C, and a test temperature of 130 degrees C) are proposed to be inserted in existing food packaging regulations to enable realistic migration testing of microwave packaging materials under conventional test conditions. It is concluded that the overall migration behaviour of packaging materials intended for microwave oven use, including microwave-active (susceptor) materials, can be judged on the basis of migration testing using conventional heating. The suitability of iso-octane as a volatile fatty food simulant for the determination of the overall migration under high-temperature test conditions was also investigated. For most samples investigated a good agreement was observed between the overall migration values obtained with olive oil applying both microwave and conventional heating, and those obtained with iso-octane under conventional conditions.

Explore related subjects

Aluminum Cooking Food Contamination Food Technology Hot Temperature Microwaves Octanes Olive Oil Plant Oils Styrenes Time Factors Comparative Study Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

N de Kruijf, R Rijk. Test methods to simulate high-temperature exposure.. https://doi.org/10.1080/02652039409374219

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2001

Chloroaluminum phthalocyanine tetrasulfonate delivered via acid-labile diplasmenylcholine-folate liposomes: intracellular localization and synergistic phototoxicity.

Folate-diplasmenylcholine (1,2-di-O-(Z-1'-hexadecenyl)-sn-glycero-3-phosphocholine; DPPlsC) liposomes have been shown to greatly enhance the potency of water-soluble antitumor agents via a selective folate-mediated uptake and acid-catalyzed endosomal escape mechanism (Rui et al. J. Am. Chem. Soc., 1998; 120:11213--18). This study describes an adaptation of this strategy for the delivery of chloroaluminum phthalocyanine tetrasulfonate ([AlPcS(4)](4-)), a water-soluble sensitizer used in photodynamic therapy, in a binary targeting scheme designed to enhance both its tumor selectivity and phototoxicity. [AlPcS(4)](4-)/DPPlsC:folate liposomes (9.8 microM bulk concentration, 2.5 mM intraliposomal concentration) were substantially more phototoxic to folate-deficient KB cells than 12.5 microM free [AlPcS(4)](4-) after a 30 min irradiation (630-910 nm). Considerable differences in phototoxicity were observed, however, between the commercially-available AlPcS(4)(4-) and an HPLC purified sample of [AlPcS(4)](4-) due to an increased tendency for the latter to aggregate. Experiments with [AlPcS(4)](4-)/DPPC:folate and folate-free [AlPcS(4)](4-)/DPPlsC liposomes (acid-insensitive and non-targeted controls, respectively) showed significantly reduced phototoxicities under the same illumination conditions. Our results imply that higher concentrations of water-soluble sensitizers can be delivered to target cells using the folate receptor-mediated pathway, which can change both the biodistribution and intracellular localization of the sensitizer when acid-labile DPPlsC liposomes are used as the delivery vehicle. Potential advantages of this approach include the use of lower bulk [AlPcS(4)](4-) concentrations, rapid plasma clearance of free [AlPcS(4)](4-), and better phototoxic responses, due to higher intracellular [AlPcS(4)](4-) concentrations combined with reduced collateral photodamage arising from misguided sensitizer accumulation, thereby enhancing the selective phototoxicity of PDT treatments.

Aluminum↗

PubMed2001

Co-involvement of mitochondria and endoplasmic reticulum in regulation of apoptosis: changes in cytochrome c, Bcl-2 and Bax in the hippocampus of aluminum-treated rabbits.

Neurodegenerative diseases, including Alzheimer's disease, are characterized by a progressive and selective loss of neurons. Apoptosis under mitochondrial control has been implicated in this neuronal death process, involving the release of cytochrome c into the cytoplasm and initiation of the apoptosis cascade. However, a growing body of evidence suggests an active role for the endoplasmic reticulum in regulating apoptosis, either independent of mitochondrial, or in concert with mitochondrial-initiated pathways. Members of the Bcl-2 family of proteins have been shown to either inhibit apoptosis, as is the case with Bcl-2, or to promote it, in the case of Bax. Investigations in our laboratory have focused on neuronal injury resulting from the intracisternal administration of aluminum maltolate to New Zealand white rabbits, an animal system relevant to a study of human disease in that it reflects many of the histological and biochemical changes associated with Alzheimer's disease. Here we report that treatment of young adult rabbits with aluminum maltolate induces both cytochrome c translocation into brain cytosol, and caspase-3 activation. Furthermore, as assessed by Western blot analysis, these effects are accompanied by a decrease in Bcl-2 and an increase in Bax reactivity in the endoplasmic reticulum.

Aluminum↗

PubMed2001

Major ion and electrical potential distribution in soil under electrokinetic remediation.

To assess the effect of pore water chemistry on the contaminant removal rate, we monitored major ion concentrations in the pore water and the electrical potential distribution of a soil during electrokinetic remediation treatment. On application of the voltage, the soil near the anode became acidic due to the electrolytic generation of H+, and the acid region gradually spread toward the cathode. The major cation in the acid region was, however, not H+ but Al3+ that arose from the acid-induced dissolution of soil minerals, and it migrated very slowly toward the cathode. The measured pH and accompanying ion concentrations indicated that the anomalously slow migration of Al3+ was due to its precipitation-dissolution reaction at the acid front. The stagnancy of Al3+ increased the ionic concentration, flattened the electrical potential profile, and in turn, diminished electromigration in the acid region. This seems to be one of the causes of the relatively low removal rate of cationic and anionic contaminants in electrokinetic treatments.

Aluminum↗