PubMed · 802398
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
D Zanier. [Ceramic bridges].. https://pubmed.ncbi.nlm.nih.gov/802398/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Explore the source record for details and available documents.
The purpose of this study was to test the hypothesis that high-leucite content feldspathic porcelain can be strengthened best by thermal tempering followed by ion exchange, compared with either thermal tempering or ion exchange alone. The results of biaxial flexure testing indicate that thermal tempering was the most effective way of strengthening the porcelain among the three methods tested. The combined procedure did not yield the greatest strengthening effect as hypothesized, but one that is only slightly stronger than that produced by ion exchange alone. Weibull analysis indicated that the ion-exchange treatment resulted in a narrower distribution of biaxial flexural strength compared with that of untreated or thermally tempered porcelain. The narrower distribution of biaxial flexural strength is considered desirable for enhancing the longevity of ceramic-based dental restorations.
Previous studies of opaque-porcelain/body-porcelain discs have shown that compressive stresses which develop in the porcelain surface by being tempered in air can inhibit the sizes of cracks induced within the surface. The objective of this study was to develop a theoretical model for analysis of transient and residual stresses in opaque-porcelain/body-porcelain discs which were produced under variable cooling conditions. The model incorporates the effects of stress and structural relaxation. Transient and residual stresses were calculated for bilayered porcelain discs 16 mm in diameter and 2 mm in thickness for three opaque-porcelain/body-porcelain combinations. Transient temperature distributions in the discs for simulated convective cooling were calculated by finite-element analysis. Data from microhardness indentations reported by Anusavice et al. (1989) indicate that crack lengths measured for bilayered porcelain discs subjected to slow cooling conditions, for which the model predicted residual tensile stresses, were greater than those combinations for which residual compressive stresses were calculated. Calculated values of residual compressive stress for tempered specimens were considerably higher than those for specimens that were slowly cooled and those that were cooled by free convection. In general, residual stress levels calculated by use of the analytical model were in fairly good agreement with the trends observed for crack lengths and bi-axial flexural strengths reported by Anusavice and Hojjatie (1991). The results of the present study indicate that a visco-elastic model is a viable approach for determination of transient and residual stresses in opaque-porcelain/body-porcelain discs.