PubMed · 802308
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
K Weber. Preheating as a parameter for casting quality.. https://pubmed.ncbi.nlm.nih.gov/802308/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
How accurate is today's method of casting in the dental laboratory? Normally it is good enough, but what happens if the dental technician is confronted with an extensive restoration or has to deal with the precision of prefabricated implant abutments? In either case, he or she is headed for trouble. So what is to be done, especially if both of these components come together? The force transferred to the osseointegrated endosseous implants is naturally undesirable and the main reason for premature loss of the implants. The present article describes the production of an implant-related restoration for a 50-year-old patient. The plans were to make a partially removable, implant abutment-- connected, base metal framework and to administer spark-erosion machining to achieve a passive fit.
This article describes an index for the fabrication of a mandibular implant-supported overdenture bar. The index is a two-piece mold made from an addition silicone putty material. It is used to record and maintain the relative position of the morphologic contours of the trial denture to the master cast. The split-mold design permits direct visualization of the amount of space available for the design of the retentive bar from both the facial and lingual aspects while ensuring room for an adequate thickness of the denture base resin, without the need to remove the teeth from the trial denture wax-up.
In this investigation the effect of denture thickness on tooth movement during processing of complete dentures was studied. A maxillary cast from a patient was duplicated to obtain 10 identical casts. Base plates were constructed on five casts using 1.25 mm thick wax. Base plates were constructed on the other five casts using 2.5 mm thick wax. Teeth were placed on the ridge of each cast and a TMS pin was placed vertically, upright, in each tooth. The dentures were invested, cured, decasted, finished and polished. Each denture was radiographed immediately before processing, after deflasking, on removal from the cast and after finishing and polishing using a standard technique. The radiographs were digitized using an Eikonix image digitizer. The results showed that there were significant variations in tooth movement between thick and thin denture bases. Also an increase in the molar-to-molar distance was found in both the thin and thick dentures but the magnitude of tooth movement was more in thick dentures.