Search PubMed⌕ Search

PubMed · 7174943

Radiopaque suppository simulating bladder calculus.

Abstract

The source did not provide an abstract. Follow the original record for more information.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J M Brown, H R Gould. 1982. Radiopaque suppository simulating bladder calculus.. https://doi.org/10.1097/00004728-198212000-00031

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Sources and behaviour of bismuth active substances (BiAS) in a municipal sewage treatment plant.

Non-ionic surfactants are widely used for household and industrial purposes. For different reasons the metabolites, e.g. 4-nonylphenol, nonylphenol monoethoxylate, nonylphenol diethoxylate and 4-tert-octylphenol, are especially considered to be endocrine disruptive and thus potentially harmful for the environment. In this study, field samples of raw wastewater from different point sources, including industrial effluents, household effluents, the influent and secondary effluent of a wastewater treatment plant that treats this wastewater were monitored simultaneously. Composite samples were taken five times over periods of 1 week at nine sample sites. The results showed that the concentrations and fluxes were varying. In addition industrial, influent and effluent samples were investigated for nonylphenol (NP). The highest concentrations of bismuth active substances (BiAS) were obtained by wastewater samples from a chemical and a cloth washing company ranging from 10,200 to 65,600 microg/l and 14,600 to 33,900 microg/l BiAS, respectively. Although the concentration of BiAS in the wastewater of the paper production was only between 460 and 1200 microg/l BiAS, the NP/BiAS ratio of 0.51% was considerably higher than in other industrial effluents. The BiAS concentration in wastewater samples from households ranged from 2200 to 7900 microg/l BiAS, but the NP concentration was quite low, 0.01% of BiAS. This could be due to the effort within the EU to phase out nonylphenol polyethoxylates in household detergents. Influent concentrations between 700 and 2200 microg/l BiAS with removal rates in the WWTP ranging from 70.7 to 99.4% with an average of 92.2% could be measured.

Bismuth↗

Radioactive contamination of wood and its products.

This paper presents research on radioactive contamination of the three most common kinds of wood in Croatia--beech, oak and fir as well as acorn. Gamma-spectrometric measurements carried out on the samples of bark and wood of beech, oak, fir and acorn have shown radioactivity contents ranging from 1.6 +/- 0.1 to 37.3 +/- 0.5 Bq/kg from deposited 137Cs, whose concentrations in the soil of Croatia have increased after the Chernobyl accident. Measurements have also shown the radioactivity originating from 40K and 214Bi, which are part of the natural composition of the soil. The distribution of the radionuclides in wood has been discussed, as well as the impact of radioactive contamination of wood by the artificial radionuclide 137Cs upon the forest ecosystem. According to the corresponding model, it has been calculated that a 10 h daily stay in a typical family house increases the annual radiation dose of the population, due to the deposited 137Cs in the structure or furniture, by 343 microSv.

Bismuth↗

Flow injection manifold for the direct spectrophotometric determination of bismuth in pharmaceutical products using Methylthymol Blue as a chromogenic reagent.

A new simple and rapid flow injection method is reported for the direct determination of bismuth in pharmaceutical products. Methylthymol Blue (MTB) was used as a chromogenic reagent and the absorbance of the colored Bi(III)-MTB complex produced was monitored at 548 nm. The various chemical and physical variables were optimized and a study of interfering ions was also carried out. Linear calibration graphs were obtained from 0 to 100 mg l-1 Bi(m) (120 injections per hour). The precision was very good (sr = 1.3%) and the limit of detection was cL = 0.150 mg l-1. The average accuracy was also very good (er = 0.75%) and was evaluated by comparison of the results obtained with those claimed by the manufacturers. The method was found to be adequately selective, considering the ions that the samples contain.

Bismuth↗