Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 7155081

"Nonisolated-sensor" solid polystyrene absorbed dose measurements.

L Zeitz·J S Laughlin
View original source ↗Export metadata ↓

Abstract

A "nonisolated-sensor" solid polystyrene calorimeter was constructed to test the role of thermal diffusion in limiting the length of irradiation time during which temperature measurements with nonisolated sensors could be made sufficiently free of drift for determining dose with radiation fields such as gamma rays, x rays, and high-energy electrons. From measured ratios of dose at 5.0 and 0.5 cm in polystyrene and comparisons to dose measurements with a polystyrene parallel-plate (pancake) ion chamber, it was shown that thermal diffusion is sufficiently small in polystyrene to permit accurate measurements for irradiation periods of less than 20 min. Comparison of the absorbed dose measurements and depth dose ratios with pancake ion chambers and calorimeter showed, that within the precision and accuracy of the two measuring systems, there is close agreement. The nonisolated-sensor solid polystyrene calorimeter has the interesting features of (i) simplicity of construction, (ii) simplicity of operation without vacuum or feedback for temperature control, (iii) capability of simultaneous measurements at several depths and off-axis positions, (iv) the very small thermal defect correction with polystyrene, and (v) operation with the calorimeter in any orientation.

Explore related subjects

CalorimetryPolystyrenesRadiation DosageRadiometryTechnology, RadiologicJournal ArticleResearch Support, U.S. Gov't, Non-P.H.S.Research Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

L Zeitz, J S Laughlin. "Nonisolated-sensor" solid polystyrene absorbed dose measurements.. https://doi.org/10.1118/1.595182

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed1998

Evaluation of the stoichiometry and energetics of carbohydrate binding to Ricinus communis agglutinin: a calorimetric study.

High-sensitivity isothermal titration calorimetry has been used to investigate the thermodynamics of binding of Ricinus communis agglutinin to galactose, lactose and their derivatives in the temperature range 280.5-298 K. The present study unequivocally establishes the carbohydrate-binding stoichiometry of the tetrameric agglutinin from castor bean as two, i.e. the (As-sB)2-type tetramer of the agglutinin has two equivalent sites that are non-interacting and independent. The site binding constants range from 2.2x10(3) M-1 at 282 K for galactose to 4.84x10(4) M-1 at 281 K for N-acetyl-lactosamine. The binding enthalpies range from -21.9 kJ. mol-1 at 293 K for 4-methylumbelliferyl-beta-galactoside to -50.2 kJ. mol-1 at 292.9 K for thiodigalactoside. The observation of limited entropy-enthalpy compensation for binding of the sugars to the lectin indicates that reorganization of water molecules plays an important role in binding. As the slope of the compensation plot is greater than unity, the reactions are largely enthalpically driven. These studies show that the stronger binding of N-acetyl-lactosamine than lactose is due to a favourable interaction between the acetamido group of the reducing-end N-acetylglucosamine of the former and the corresponding loci in the agglutinin molecule. Preferential binding of methyl-beta-galactoside over methyl-alpha-galactoside also indicates the apolar nature of the interaction with the methyl group of the former sugar.

Calorimetry↗
PubMed1998

A general rule for the relationship between hydrophobic effect and conformational stability of a protein: stability and structure of a series of hydrophobic mutants of human lysozyme.

To get a general rule for the relationship between hydrophobic effect and conformational stability, five Ile to Val and nine Val to Ala mutants (3SS mutants) from 3SS (C77A/C95A) human lysozyme were constructed. As known from previous studies, the 3SS protein lacking a disulfide bond between Cys77 and Cys95 is destabilized by enthalpic factors, as revealed by a decrease of about 20 kJ/mol in the denaturation Gibbs energy change (DeltaG) value, as compared to the wild-type protein, which has four disulfide bonds. In this study, the stabilities and structures of the 3SS mutants were determined by differential scanning calorimetry and X-ray crystal analysis, respectively, and compared with those of the mutants (4SS mutants) from the wild-type (4SS) protein published previously. The stabilities of all the 3SS mutants, except for V110A-3SS were decreased as compared with that of the 3SS protein, coinciding with the results for the 4SS mutants. The change in the denaturation Gibbs energy change (DeltaDeltaG) values of the 3SS mutants relative to the 3SS protein at the denaturation temperature (49.2 degreesC) of the 3SS protein at pH 2.7 were similar to those of the equivalent 4SS mutants relative to the wild-type at 64.9 degreesC. The Delta DeltaG values of the 3SS mutants correlated with the changes in hydrophobic surface area exposed upon denaturation (Delta DeltaASAHP) for all of the hydrophobic residues when the effects of the secondary structure propensity were considered. This correlation is identical with that previously found for the 4SS mutants. The linear relation between Delta DeltaG and Delta DeltaASAHP for all of the hydrophobic residues with the same slope was found also for the mutants of T4 lysozyme already reported, indicating that this is a general relationship between changes in conformational stability and changes in ASA values of hydrophobic residues due to mutations.

Calorimetry↗
PubMed1998

Proton induced vesicle fusion and the isothermal lalpha-->HII phase transition of lipid bilayers: a 31P-NMR and titration calorimetry study.

The proton-induced isothermal fusion of unilamellar lipid vesicles (Duzgunes et al., Biochemistry 24 (1985) 3091-3098) is compared with the lamellar (Lalpha)-->hexagonal (HII) phase transition of multilamellar lipid dispersions. Both lipid systems are composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and oleic acid (OA) at a 7:3 molar ratio. Using solid-state phosphorus-31 nuclear magnetic resonance (31P-NMR) it is demonstrated that the multilamellar lipid dispersions are in the bilayer state at physiological pH and undergo a Lalpha-->HII phase transition between pH 6.3 and 5.7. This phase transition can also be induced at constant pH by increasing the temperature. The midpoint of the temperature-induced Lalpha-->HII transition is Th=56 degrees C (at pH 7.4) and the corresponding transition enthalpy is DeltaH=0. 7+/-0.1 kcal/mol as determined with differential scanning calorimetry. Both the proton-induced and the temperature-induced phase transition can be completely inhibited by addition of 30 mol% of 1-palmitoyl-2-hydroxy-sn-glycero-3-phosphocholine (LPC). In a second set of experiments unilamellar vesicles are prepared either by sonication or by extrusion through polycarbonate filters at pH 7. 4 and are titrated into buffer at pH 5.7. The proton-induced fusion of the lipid vesicles is monitored with isothermal titration calorimetry, light scattering and fluorescence spectroscopy. The fusion reaction is characterized by an endothermic enthalpy of DeltaH=0.5+/-0.2 kcal/mol (at 28 degrees C). The fusion enthalpy is independent of the vesicle diameter and is only slightly reduced by an increase in temperature to 50 degrees C. Vesicle fusion is accompanied by an increase in light scattering, indicating the formation of larger lipid structures. The transition from unilamellar vesicles to fused lipid structures occurs in the same narrow pH range of 6.3-5.7 as observed for the Lalpha-->HII transition of multilamellar dispersions. Vesicle fusion can be inhibited with 30% LPC. The virtually identical set of parameters found for the Lalpha-->HII phase transition and the vesicle fusion reaction suggests that vesicle fusion also entails a Lalpha-->HII phase transition.

Calorimetry↗