PubMed · 6802023
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
R V Acuff, J T Smith. 1981. A method for determining tissue sulfate.. https://doi.org/10.1016/0003-2697(81)90188-3
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Water-based magnetic fluids, generally intended for biomedical applications, often have various coating molecules that make them stable and compatible with biological liquids. Magnetic fluids containing iron oxide particles have been prepared by a co-precipitation method, using citric acid as stabilizer. The magnetic particles of the magnetic fluids were obtained by chemical precipitation from ferric (FeCl(3)) and ferrous salts (FeSO(4) or FeCl(2)) in alkali medium (ammonia hydroxide). Citric acid was used to stabilize the magnetic-particle suspension. Physical tests were performed in order to determine various microstructural and rheological features. Transmission electron microscopy was the main investigation method for assessing the magnetic-particle size. The dimensional distribution of the magnetic-particle physical diameter was analyzed using the box-plot statistical method while infrared absorption spectra were used to study the colloidal particle structure. The magnetic-fluid density (picnometric method), viscosity (capillary method) and surface tension (stalagmometric method) were measured using standard methods.
We have developed an integrated array of microbioreactors, with 100 microL working volume, comprising a peristaltic oxygenating mixer and microfluidic injectors. These integrated devices were fabricated in a single chip and can provide a high oxygen transfer rate (k(L)a approximately 0.1 s(-1)) without introducing bubbles, and closed loop control over dissolved oxygen and pH (+/-0.1). The system was capable of supporting eight simultaneous Escherichia coli fermentations to cell densities greater than 13 g-dcw L(-1) (1 cm OD(650 nm) > 40). This cell density was comparable to that achieved in a 4 litre reference fermentation, conducted with the same strain, in a bench scale stirred tank bioreactor and is more than four times higher than cell densities previously achieved in microbioreactors. Bubble free oxygenation permitted near real time optical density measurements which could be used to observe subtle changes in the growth rate and infer changes in the state of microbial genetic networks. Our system provides a platform for the study of the interaction of microbial populations with different environmental conditions, which has applications in basic science and industrial bioprocess development. We leverage the advantages of microfluidic integration to deliver a disposable, parallel bioreactor in a single chip, rather than robotically multiplexing independent bioreactors, which opens a new avenue for scaling small scale bioreactor arrays with the capabilities of bench scale stirred tank reactors.
The mechanisms and kinetics of NH(4)OH-KOH mixture pulping rice straw were studied. When aqueous ammonia was mixed with a small amount of caustic potash (ratio of 1:5), three distinct delignification phases were observed in the pulping process: a bulk delignification phase from the beginning of the cooking period to 100 degrees C, a supplementary delignification phase from 100 degrees C to 155 degrees C lasting a further 45 min, and a residual delignification phase until the end of the cooking period. There were two silica removal phases; the first phase was from the beginning of the cooking period to 100 degrees C and the second phase was from 100 degrees C to the end of the cooking period. The rate of delignification reaction was first order with respect to residual lignin and 0.3 order with respect to [OH(-)]. The silica removal was pseudo-first-order with respect to residual silica and 0.6 order with respect to [OH(-)]. The activation energies of the delignification and removal of silica reactions were 35.6 and 30.9 kJ/mol, respectively.