PubMed · 6552119
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
D Karsten. 1983. Interview: Diane Karsten.. https://pubmed.ncbi.nlm.nih.gov/6552119/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Explore the source record for details and available documents.
The intrathoracic anatomical situation after explantation of the natural heart defines the maximum available space for the design of the housing as well as of the inlet- and outlet connectors of a fully implantable electromechanical artificial heart. Based on computer-assisted anatomical studies, a total artificial heart housing is designed which facilitates an oblique orientation of the pumping chambers for a better fluidmechanical and anatomical arrangement of the in- and outlet connectors. The pumping chamber geometry is based on modifications of an existing cardiac assist-system. Subsequently a mechanical gear which conforms to this anatomically adapted housing is developed.
An in vitro fluid dynamic study was performed to compare the hemodynamic characteristics of a rigid and a flexible total artificial heart. The artificial ventricles were incorporated into a mock circulatory system, and pressure signals within the ventricular chamber, proximal to the inflow valve and distal to the outflow valve, were obtained. The instantaneous flow rate through the inflow and outflow valves was measured with electromagnetic flow probes. Flow visualization studies performed on the flexible ventricle suggested a vortical motion within the chamber with a smooth washout of fluid in the next pumping phase, but flow disturbances were observed near the wall of the ventricle as well as near the outflow valve. The rate of pressure increase (dP/dt) was smaller in the flexible ventricle as compared with the rigid ventricle for comparable flows and heart rates. The results of the present study indicated that the flexible ventricle with polyurethane valves, having the advantage of ease of implantation and cost savings, can be a viable alternative as a bridge to transplant.