PubMed · 6518088
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M M Traisnel. 1984. Controlled release from microcapsules.. https://pubmed.ncbi.nlm.nih.gov/6518088/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Matrix mini-tablets based on a combination of microcrystalline waxes and starch derivatives were prepared using ibuprofen as a model drug. The production of mini-tablets was preferred over the production of pellets, as up-scaling of the pelletisation process seemed problematic. Prior to tabletting, melt granulation in a hot stage screw extruder and milling were required. The in vitro drug release was varied using microcrystalline waxes with a different melting range, the slowest drug release being obtained with a formulation containing a microcrystalline wax with a melting range between 68 and 72 degrees C. Generally speaking increasing the wax concentration resulted in a slower drug release. In vitro drug release profiles were also modified using different starches and mixtures of starches. Increasing the ibuprofen concentration to 70% resulted in a faster drug release rate.
A method and a sensor device were developed to detect dynamic laser speckle pattern for monitoring of deformation of pharmaceutical tablets after compression. Temporal variations in optical signal revealed local surface deformation of the ibuprofen and the starch acetate tablets as well as anisotropy of tablet surfaces at the inspection location.
Microcapsules were prepared by using a double-emulsion technique. A new production method called 'induced phase separation method' was applied to encapsulate peptides and proteins. To find the optimal adjuvants a matrix was set up combining the appropriate organic solvents and the suitable surfactants. The polymer was chosen with regard to the required release period. The aqueous drug solution was intensively mixed with the organic polymer solution. An aqueous surfactant solution was slowly added to the O/W emulsion. The obtained W/O/W emulsion is stirred under partial vacuum conditions until the organic solvent was removed. After removing the solvent from the W/O/W emulsion the microcapsules were washed and lyophilized. The morphology of the microparticles (spheres, sponges, capsules, surplus polymer) was checked by microscopy, particle size distributions were measured by laser diffraction.