Search PubMed⌕ Search

PubMed · 5424594

A compact counting system utilizing integrated circuits and a solid state detector.

Abstract

The source did not provide an abstract. Follow the original record for more information.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J Chester, R Chase. 1970. A compact counting system utilizing integrated circuits and a solid state detector.. https://doi.org/10.1097/00004032-197003000-00001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PCB removal from contaminated dredged material.

The purpose of this study was to evaluate the feasibility of decontaminating PCB contaminated sediment using land treatment technology. Five glass aquariums were set up to test the disappearance of polychlorinated biphenyls (PCBs) in dredged sediment under laboratory conditions that simulated photodegradation, biological transformation, and volatilization in dredged material confined disposal facilities (CDFs). A 40% decline in PCB concentration was achieved over a period of 5 months. Analysis of the variance in the data showed that periodic tilling produced a tangible effect on the disappearance of PCBs. However, the process or processes responsible for PCB disappearance could not be determined. PCB disappearance from the sediment was most likely caused by a combination of photolysis, volatilization, and biodegradation mechanisms rather than by any single process.

Decontamination↗

Removal of heavy metals from sandy soil using CEHIXM process.

This paper presents the results of a new process of soil decontamination termed as couple electric-hydraulic gradient assisted by ion exchange medium (CEHIXM) in which a hydraulic gradient is coupled with electric gradient in a non-conventional arrangement for the purpose of electrolysis and ion transport. A suitable ion exchange medium was used to capture and subsequently recover the cations. In this process, heavy metals no longer precipitated in the treated soil near the pretreatment zone. The cations were transported out of the soil and captured in the ion exchange medium. Several laboratory tests were conducted to examine the removal of Pb, Cd, Zn and Mn from sandy soils. The experimental results demonstrated the removal efficiencies more than 97% for all the four heavy metals at an energy expenditure of 345 kWh/m(3) of soil.

Decontamination↗

Field demonstration of pervaporation for the separation of volatile organic compounds from a surfactant-based soil remediation fluid.

As part of a Department of Defense project, the US Environmental Protection Agency was responsible for designing, building and field operating a pilot-scale pervaporation unit. The field site was an active dry cleaning facility on the grounds of Marine Corps Base Camp Lejeune in Jacksonville, NC. The overall goal of the project was to remove tetrachloroethylene (PCE) from the soil beneath the dry cleaning shop using a surfactant-based soil remediation fluid and to recycle/reuse the surfactant. In order to reinject the recovered surfactant, the pervaporation unit was required to achieve an average 95% removal of contaminants from the extracted fluid over the duration of the test period. PCE removal averaged 95.8% during peak surfactant levels and exceeded 99.9% in the absence of surfactant, thereby meeting the reinjection requirement. Removal of a group of secondary contaminants at the site, termed Varsol compounds, was monitored via concentrations of three Varsol marker compounds: decane, undecane and 1,3,5-trimethylbenzene. The pervaporation system processed 100,000 gal of groundwater and surfactant solution over a period of 70 days. In order to evaluate and validate process performance, a variety of process variables and properties were monitored over the course of the demonstration. Pervaporation costs are projected to be on the order of $20 per 1000 gal of surfactant solution treated for a moderate size system (10 gpm).

Decontamination↗