PubMed · 5221204
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
K Horie. 1965. [Plaster disintegrators].. https://pubmed.ncbi.nlm.nih.gov/5221204/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
OBJECTIVES: This paper describes a method of making titanium dental crowns by means of integrating laser measuring, numerical simulation and rapid prototype (RP) manufacture of wax patterns for the investment casting process. METHODS: Four real tooth crowns (FDI No. 24, 25, 26, 27) were measured by means of 3D laser scanning. The laser digitized geometry of the crowns was processed and converted into standard CAD models in STL format, which is used by RP systems and numerical simulation software. Commercial software (MAGMASOFT) was used to simulate the casting process and optimize the runner and gating system (sprue) design. RP crowns were 'printed' directly on a ModelMaker II 3D Plotting System. A silicone negative mold (soft tool) was made from the RP crowns, then more than hundreds wax crowns were duplicated. The duplicated crowns were joined to the optimized runner and gating system. By using the investment casting process 20-25 replicas of each crown were made on a centrifugal casting machine. All castings were examined for porosity by X-ray radiographs. RESULTS: By using the integrated scanning, simulation, RP pattern and casting procedure, cast crowns, free of porosity, with excellent functional contour and a smooth surface finish, were obtained from the first casting trial. SIGNIFICANCE: The coupling of laser digitizing and RP indicates a potential to replace the traditional 'impression taking and waxing' procedure in dental laboratory, with the quality of the cast titanium prostheses also being improved by using the numerically optimized runner and gating system design.
This article describes a new procedure for producing cross sections of a cast, a denture, or an impression and a method of presenting the results in graphic form to show variance. To test the method, identically colored, duplicate dentures were embedded in plaster blocks formed from a precisely engineered and calibrated brass box. A modified jig and saw allowed the plaster blocks to be positioned, held, and sectioned at any required location with a high degree of accuracy. The sectioned surfaces of the duplicate dentures were scanned. The resultant profiles were registered in location frames on the computer screen, traced by computer to produce outlines, and printed onto transparent film for the purpose of comparison. In vitro results showed the relationship between congruent outer forms and provided clear visual evidence of the accuracy of the procedure used and a way to further in vivo use.
A method of producing CaSO4:Dy thermoluminescent mini-dosimeters was reported in 1986 by B W Wessels for determination of the in vivo absorbed dose in radioimmunotherapy, a field in which absorbed dose gradients are important. These dosimeters, which undergo dissolution when used in a liquid environment, showed a sensitivity loss of up to 30% after 4 days of immersion in our tests. Moreover, several studies have shown that biocompatibility problems can occur during in vivo studies in animals. This paper describes the production and testing of a new type of thermoluminescent mini-dosimeter obtained by microextrusion of a mixture of LiF:Mg,Cu,P polypropylene and plastic adjuvants. These dosimeters, in the form of long 400 microm diameter filaments, can be cut to the desired length. The production process allows an LiF:Mg,Cu,P load of up to 50%. Results obtained in external irradiation indicate that these new miniature LiF:Mg,Cu,P dosimeters have good sensitivity (about 1.6 times that of CaSO4:Dy mini-TLDs), homogeneous response within a production batch (mean +/-4%), response stability in water (0.7% of variation in sensitivity after 2 weeks of immersion) and stability in aqueous solutions at different pH. LiF:Mg,Cu,P mini-dosimeters appear to be highly promising for internal dosimetry, and evaluation is in progress in animals.