PubMed · 4885308
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
T Kusakabe, K Fujii, M Fukase. 1968. [Thyroid hormone preparations].. https://pubmed.ncbi.nlm.nih.gov/4885308/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Properties of mixtures of Portland cements and "waste steel foundry dust (WSFD)" from Czech steel works were examined. It was found that WSFDs are formed by microporous clusters of spherical particles of iron oxides, ranging in size from 10 to 100 nm. The content of ZnO in WSFD affects markedly the hydration of cement + WSFD mixtures both in solidification time and strength development. Properties of WSFD are very similar to those of very fine silicon flue dusts formed during Si and FeSi production. Cement + WSFD mixtures show long term strength stability and low heavy metals leaching even at WSFD content of 70-80wt.% The above results document the perspectives of WSFD solidification, disposal and the use of this waste material as a new additive to building materials.
Regulatory guidelines for the assessment of acute dermal and ocular toxicity refer to the need to take the pH values of chemicals into consideration, since the acidic and basic properties of chemicals are known to play a role in the generation of acute dermal and ocular lesions. However, not all test guidelines provide an objective interpreting pH measurements in terms of acute skin or eye toxicity. The aim of this study was to develop classification models based on pH data for predicting the potential of chemicals to cause skin corrosion, skin irritation and eye irritation. The possible application of these models in the context of tiered testing strategies is discussed.
High-resolution X-ray photoelectron spectroscopy (XPS) has been applied to a series of free-base and Zn-porphyrin polymers in which the macrocycles are separated by oligo(phenylene vinylene) units (OPV) of different, controllable lengths. Neat films of all the Zn-porphyrin polymers unexpectedly reveal two peaks in the N 1s XPS region ( approximately 400 eV). The peak areas vary with the length of the OPV bridge, suggesting an intermolecular interaction between the porphyrin and linker subunits. A series of XPS analyses were performed to identify the different interactions taking place in these thin films. To inhibit interpolymer interactions, one of the polymers was incorporated into a nonconjugated PMMA matrix, collapsing the N1s spectrum to a single peak at 398.0 eV, relative to the neat film signals at 397.8 and 400.1 eV. In a conjugated matrix of OPV, two peaks remain at 401.7 and 399.5 eV. Extensive vacuum drying of the neat film leads to a single peak at 398.3 eV, suggesting loss of trapped solvent molecules. Ultimately, we attribute the lower energy signal of the neat films to solvent ligation, and the higher energy peak is attributed to interactions between the porphyrins and conjugated bridges on nearby polymer chains. This interpretation is successfully applied to the N 1s XPS data from a previously reported Zn-porphyrin oligomer-based multilayer array.