PubMed · 4863242
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
J Gonzalez, J P Urrea, I Alcalay. [Dental casting technic].. https://pubmed.ncbi.nlm.nih.gov/4863242/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
This article presents a procedure whereby a template made of casting investment is used to stabilize a sectioned implant framework that has been adapted in a passive relationship to the implant analogs in a corrected master cast. The joints in the sectioned framework are filled with wax, sprues attached, and the template and sectioned framework are invested in a casting ring. When the casting procedure is completed, the framework will be reconnected by direct metal casting.
It is the desire of every dentist and dental technician to produce a restoration that will fit the patient with a minimum of adjustments and certainly one that does not require remaking. Yet many abuse the materials with which they work, either through improper manipulation, lack of familiarity with their properties, or by attempting to reduce laboratory time by taking short cuts. Wax is one of the materials that requires more knowledge and skill to manipulate accurately because it has a considerably higher coefficient of thermal expansion (and contraction) than any other dental material. It often contributes considerably to the inaccuracies of cast dental restorations. This article provides a review of dental waxes used to make prosthodontic castings and points out some of the properties of waxes that must be controlled to make accurate restorations.
Recently, several new products of investments for "quick heating" have been put on the Japanese market. The total casting procedure time for this quick heating method involves only one hour; 30-minutes waiting after the start of mixing before placing the mold directly into the 700 degrees C furnace and 30-minutes heating in the furnace. The purpose of this study was to evaluate two variables effecting casting accuracy using these new investments. The effect of thickness of the casting liner inside the casting ring and the effect of waiting time before placing the mold into the 700 degrees C furnace were evaluated. A stainless-steel die with a convergence angle of 8 degrees was employed. Marginal discrepancies of the crown between the wax patterns and castings were measured. The size of the cast crown became larger when the thickness of the ring liner was thick and when the waiting time before placing the mold into the furnace was long. These results suggest that these new investments have the advantage of providing sound castings using short-time casting procedures. However, it is necessary to pay careful attention to the casting conditions for obtaining reproducible castings.