Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 4057997

Fast method for computing the Fourier integral transform via Simpson's numerical integration.

P Simonen·H Olkkonen
View original source ↗Export metadata ↓

Abstract

A new algorithm for computing the Fourier transform is described. The method is based on the calculation of the Fourier integral transform (FIT) with the aid of the numerical Simpson's integration technique. Compared to the conventional fast Fourier transform (FFT), the new SFIT algorithm, gives results which are much closer to the analytic Fourier transform for discrete signals. Especially in the calculation of the phase spectra considerable improvement is obtained. The N-point SFIT can effectively be computed by using two N/2-point FFTs.

Explore related subjects

Biomedical EngineeringFourier AnalysisStatistics as TopicJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

P Simonen, H Olkkonen. 1985. Fast method for computing the Fourier integral transform via Simpson's numerical integration.. https://doi.org/10.1016/0141-5425(85)90067-6

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗