Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 3625750

Current developments in oxygen concentrator technology.

N D Harris·J M Stamp
View original source ↗Export metadata ↓

Abstract

Oxygen concentrators are electrically powered devices which are designed to provide oxygen for patients who require long-term domiciliary oxygen. The machines have been available for the last 10 to 15 years, but it is only recently that improvements in design have led to them being generally accepted as a reliable and economical means of supplying long-term oxygen therapy. There are two basic types of concentrator currently available: the molecular sieve (MS) concentrator, and the membrane oxygen enricher. In this article the characteristics and principles of operation of these machines are reviewed, together with the development and present state of MS concentrator technology. A summary of a comparative evaluation of seven MS concentrators is presented and the results discussed. Relevant safety standards and current trends in concentrator design are then reviewed.

Explore related subjects

Biomedical EngineeringHumansOxygenatorsOxygenators, MembraneSafetyJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

N D Harris, J M Stamp. Current developments in oxygen concentrator technology.. https://doi.org/10.3109/03091908709018150

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗