Search PubMed⌕ Search

PubMed · 3340180

Molecular manipulation using a tunnelling microscope.

Abstract

In a very short time the scanning tunnelling microscope has become an important tool in surface science, and physics in general. Its primary use has been to obtain atomic-resolution images of surfaces, but recently, efforts have been made to use it to manipulate materials as well as image them. One may now reasonably ask if it is possible to move and alter matter predictably on an atomic scale. Here we report the accomplishment of the smallest yet, purposeful, spatially localized changes in matter, effected on a graphite surface. We believe that the changes result from the pinning of individual organic molecules to the graphite. The reverse manipulation, the removal of pinned molecules, has also been demonstrated. Finally, we have evidence that we can remove a portion of a pinned molecule, effectively performing transformations on single molecules using the tunnelling microscope.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J S Foster, J E Frommer, P C Arnett. 1988-01-28. Molecular manipulation using a tunnelling microscope.. https://doi.org/10.1038/331324a0

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Optimization of scanning transmission X-ray microscopy for the identification and quantitation of reinforcing particles in polyurethanes.

The morphology, size distributions, spatial distributions, and quantitative chemical compositions of co-polymer polyol-reinforcing particles in a polyurethane have been investigated with scanning transmission X-ray microscopy (STXM). A detailed discussion of microscope operating procedures is presented and ways to avoid potential artifacts are discussed. Images at selected photon energies in the C 1s, N 1s and O 1s regions allow unambiguous identification of styrene-acrylonitrile-based (SAN) copolymer and polyisocyanate polyaddition product-based (PIPA) reinforcing particles down to particle sizes at the limit of the spatial resolution (50 nm). Quantitative analysis of the chemical composition of individual reinforcing particles is achieved by fitting C 1s spectra to linear combinations of reference spectra. Regression analyses of sequences of images recorded through the chemically sensitive ranges of the C 1s, N 1s and O 1s spectra are used to generate quantitative compositional maps, which provide a fast and effective means of investigating compositional distributions over a large number of reinforcing particles. The size distribution of all particles determined by STXM is shown to be similar to that determined by TEM. The size distributions of each type of reinforcing particle, which differ considerably, were obtained by analysis of STXM images at chemically selective energies.

Microscopy, Electron, Scanning↗

Effects of fatigue loading and PMMA precoating on the adhesion and subcritical debonding of prosthetic-PMMA interfaces.

Debonding of clinically relevant CoCrMo-polymethylmethacrylate (PMMA) interfaces is shown to occur subcritically under fatigue loading, implying that debonding may occur at loads much lower than those required for catastrophic failure. Interface fracture mechanics samples containing precoated and uncoated grit-blasted CoCrMo substrates and a PMMA layer were constructed and quantitatively evaluated in terms of their critical interface adhesion and subcritical debond behavior. The precoat surfaces had markedly enhanced adhesion and fatigue resistance in both air and simulated physiological environmental conditions compared to the uncoated samples. Constraint of the PMMA layer does not significantly affect the debond process for thickness between 2- and 5-mm. In addition, wear particles were collected and shown to be consistent with particle sizes reported in vivo and are on the scale of the metal surface roughness. Life prediction methods using the subcritical debond-growth data are discussed.

Microscopy, Electron, Scanning↗