Search PubMed⌕ Search

PubMed · 3125012

Pulmonary function tests cannot predict exercise-induced hypoxemia in chronic obstructive pulmonary disease.

Abstract

We studied 40 patients with chronic obstructive pulmonary disease (COPD) to determine whether measurements of pulmonary function could predict a fall in arterial oxygen pressure (PaO2) with exercise. The PaO2 fell more than 3 mm Hg in 21 patients (group 1), did not change (+/- 3 mm Hg) in nine patients (group 2), and increased more than 3 mm Hg in ten patients (group 3). Group 3 had significantly less severe expiratory obstruction than groups 1 and 2. The most significant variables in predicting a change in PaO2 with exercise were the ratio of the forced expiratory volume in one second over the forced vital capacity (FEV1/FVC) and the single-breath carbon monoxide diffusing capacity (Dsb). Measurements of FEV1/FVC of 0.50 or more and Dsb of 20 ml/min/mm Hg or more were 100 percent predictive in excluding a fall in PaO2 with exercise. Measurements below these thresholds could not be used reliably to predict which patients would develop worsening hypoxemia with exercise. Because of wide variability in reference values from eight different published studies for diffusing capacity, recommended criteria based on the percent predicted Dsb should be used with caution. We conclude that pulmonary function measurements cannot be used to predict exercise-induced hypoxemia in patients with COPD; however, the measurements may be useful in identifying patients whose condition is less severe who are unlikely to develop worsening hypoxemia with exercise.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A L Ries, J T Farrow, J L Clausen. 1988. Pulmonary function tests cannot predict exercise-induced hypoxemia in chronic obstructive pulmonary disease.. https://doi.org/10.1378/chest.93.3.454

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Exploiting the pressure effect on lipase-catalyzed wax ester synthesis in dense carbon dioxide.

The present work focuses on the thermodynamic interpretation of the lauryl oleate biosynthesis in high-pressure carbon dioxide. Lipase-catalyzed lauryl oleate production by oleic acid esterification with 1-dodecanol over immobilized lipase from Rhizomucor miehei (Lipozyme RM IM) was successfully performed in a sapphire window batch stirred tank reactor (BSTR) using dense CO(2) as reaction medium. The experiments were planned to elucidate the pressure effect on the reaction performance. With increasing the pressure up to 10 MPa, the catalytic efficiency of the studied enzyme improved rising up to a maximum and decreased at higher pressure values. Kinetic observations, exhibiting that dense CO(2) expanded reaction mixture in subcritical conditions led to higher performance than when diluted in a single supercritical phase, were elucidated by phase-equilibrium arguments. The experimental results were justified with emphasis on thermodynamic interpretation of the studied system. Particularly, the different reaction performances obtained were related to the position of the operating point with respect to the location of liquid-vapor phase boundaries of the reactant fatty acid/alcohol/CO(2) ternary system. The outlook for exploitation of CO(2) expanded phase at lower pressure compared to supercritical phase, with heterogeneous system in which the solid catalyst particles are exposed to dense CO(2) expanded reaction mixture, in developing new biotransformation schemes is promising.

Carbon Dioxide↗

Tailoring porous silica films through supercritical carbon dioxide processing of fluorinated surfactant templates.

The tailoring of porous silica thin films synthesized using perfluoroalkylpyridinium chloride surfactants as templating agents is achieved as a function of carbon dioxide processing conditions and surfactant tail length and branching. Well-ordered films with 2D hexagonal close-packed pore structure are obtained from sol-gel synthesis using the following cationic fluorinated surfactants as templates: 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)pyridinium chloride (HFOPC), 1-(3,3,4,4,5,5,6,6,7,8,8,8-dodecafluoro-7-trifluoromethyl -octyl)pyridinium chloride (HFDoMePC), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-decyl)pyridinium chloride (HFDePC). Processing the sol-gel film with CO2 (69-172 bar, 25 and 45 degrees C) immediately after coating results in significant increases in pore diameter relative to the unprocessed thin films (increasing from 20% to 80% depending on surfactant template and processing conditions). Pore expansion increases with CO2 processing pressure, surfactant tail length, and surfactant branching. The varying degree of CO2 induced expansion is attributed to the solvation of the "CO2-philic" fluorinated tail and is interpreted from interfacial behavior of HFOPC, HFDoMePC, and HFDePC at the CO2-water interface.

Carbon Dioxide↗

Electron photoemission from charged films: absolute cross section for trapping 0-5 eV electrons in condensed CO2.

The electron trapping or attachment cross section of carbon dioxide (CO2) condensed as thin films on a spacer of Ar is obtained using a simple model for electron trapping in a molecular film and then charge releasing from the same film by photon absorption. The measurements are presented for different electron exposures and impact energies, film thicknesses, and probing photon energies. The cross section for trapping an electron of incident energy between 0 and 5 eV reveals three different attachment processes characterized by a maximum at about 0.75 eV, a structured feature around 2.25 eV, and a shoulder around 3.75 eV. From the measurement of their dependence with the probing photon energy, the two lowest processes produce traps having a vertical electron binding energy of approximately 3.5 eV, whereas the highest one yields a slightly higher value of approximately 3.7 eV. The 0.75 eV maximum corresponds to the formation of vibrational Feshbach resonances in (CO2)n- anion clusters. The 2.25 eV feature is attributed to the formation of a vibrationally excited 2Piu anion in (CO2)n- clusters, followed by fast decay into its vibrational ground state without undergoing autodetachment. Finally, 3.75 eV shoulder is assigned to the well-known dissociative electron attachment process from 2Piu anion state producing the O- anion in the gas phase and the (CO2)nO- anions in clusters.

Carbon Dioxide↗