Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 2915336

Stabilization technique for mobile teeth.

S I Vitsentzos
View original source ↗Export metadata ↓

Abstract

A new technique for immobilization of teeth uses inexpensive, readily available, medically acceptable, and biocompatible nylon thread. Three monofilament nylon threads of sizes between Nos. 25 and 40 are interwoven to a braid to form, along with the threaded pins, the stabilization media. A channel along the stabilized teeth is prepared; the braid is placed in it and fastened onto the teeth with the help of pins, which are threaded on them through the braid. The advantages of this method are also presented and discussed.

Explore related subjects

Acid Etching, DentalBiocompatible MaterialsComposite ResinsDental Cavity PreparationDental PinsEquipment DesignHumansNylonsPeriodontal ProsthesisPeriodontal SplintsTooth MobilityJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S I Vitsentzos. 1989. Stabilization technique for mobile teeth.. https://doi.org/10.1016/0022-3913(89)90098-x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2002

Relationship between enamel etch characteristics and resin-enamel bond strength.

OBJECTIVES: The aim of the study was to investigate the relationship between etch patterns produced on surface enamel by phosphoric acid and the corresponding bond strengths achieved. MATERIALS AND METHODS: Twenty-eight patients had the buccal surface of their teeth etched and replicated for examination under the scanning electron microscope, at the commencement of orthodontic treatment. Histometry was employed to assess the nature and quality of etch patterns using a four-point scale. Twenty of each tooth type (total of 240), were collected and A Company pre-adjusted orthodontic brackets, bonded using Transbond light-cured orthodontic adhesive according to the manufacturer's instructions and 24-hour bond strength testing was undertaken. The Adhesive Remnant Index (ARI) was recorded for the tooth and bracket surface for all specimens. RESULTS: The type of etch was not significantly affected by the side (left or right) of the mouth assessed (p = 0.532). Overall, there was no significant difference between etch types for upper and lower teeth (p = 0.218); however, there were significant differences between specific teeth in the upper and lower arch. The greatest amount of Type A etch (well-defined etched enamel prisms) was found on the lower incisors, yet in all cases this 'ideal' etch was found to occupy less than 5% of the etched buccal surface enamel. The greatest area of etched enamel surface was occupied by Type C (etched but enamel prisms not evident). The mean bond strength values varied significantly between different tooth types, with the lowest bond strength found on the upper first molar(6.5MPa) and the highest on the lower first molar (13.1 MPa). CONCLUSIONS: An ideal etch pattern is not essential in order to produce a strong bond.

Acid Etching, Dental↗
PubMed2002

Biomechanical comparison of the sandblasted and acid-etched and the machined and acid-etched titanium surface for dental implants.

To make a direct biomechanical comparison between the sandblasted and acid-etched surface (SLA) and the machined and acid-etched surface (MA), a well-established animal model for implant removal torque testing was employed, using a split-mouth experimental design. All implants had an identical cylindrical solid-screw shape with the standard ITI thread configuration, without any macroscopic retentive structures. After 4, 8, and 12 weeks of bone healing, removal torque testing was performed to evaluate the interfacial shear strength of each surface type. Results showed that the SLA surface was more powerful in enhancing the interfacial shear strength of implants in comparison with the MA surface. Removal torque values of the SLA-surfaced implants were about 30% higher than those of the MA-surfaced implants (p = 0.002) except at 4 weeks, when the difference was at the threshold of statistical significance (p = 0.0519). The mean removal torque values for the SLA implants were 1.5074 Nm at 4 weeks, 1.8022 Nm at 8 weeks, and 1.7130 Nm at 12 weeks; and correspondingly, 1.1924 Nm, 1.3092 Nm, and 1.3226 Nm for the MA implants. It can be concluded that the SLA surface achieves a better bone anchorage than the MA surface, and that sandblasting before acid etching has a beneficial effect on the interfacial shear strength. As regards the bone-implant interfacial stiffness calculated from the torque-rotation curve, the SLA implants showed an overall more than 5% higher stiffness compared with the MA implants, although the difference did not reach the statistical significance level.

Acid Etching, Dental↗
PubMed2002

Analysis of acid-treated dentin smear debris and smear layers using confocal Raman microspectroscopy.

Smear layers are generally present on any dentin surface prepared with cutting instruments and are often the only available substrate for bonding. It is commonly reported that acid removes these layers, but to date there has been no chemical evidence to support this observation. Confocal Raman microspectroscopy was used to investigate changes in the composition and molecular structure of acid-treated smear debris and in situ dentin smear layers. The exposed dentin in human molars was abraded with 600-grit silicon carbide sandpaper. Raman spectra were acquired on the smear debris and collected from the sandpaper before and after treatment with 10% citric acid, 35% H3PO4, or 0.5M ethylenediaminetetraacetic acid (EDTA). The resultant smeared dentin samples were treated with one of the aforementioned reagents, and spectra were acquired at 1.0-microm intervals across the interfaces of the smear layers/demineralized dentin/mineralized dentin. Corresponding specimens were morphologically analyzed with scanning electron microscopy (SEM). The results showed that the composition of the smear debris and the in situ smear layers was a mixture of disorganized collagen and mineral. Spectral changes in the smear debris suggested that the disorganized collagen was denatured by acid treatment. The denatured collagen formed a gelatinous matrix around the mineral in the smear layer, thereby shielding it from the acid. The smear layers were not apparent in the SEM micrographs of acid-etched dentin prepared and processed with conventional techniques. The micro-Raman spectroscopic results presented in this study provide the first direct evidence that partially denatured collagen within smear layers is not removed and that the mineral is only partially removed with acids that represent conventional dentin adhesive etchants.

Acid Etching, Dental↗