Search PubMed⌕ Search

PubMed · 16916013

Benzidine transformation processes in natural sediments.

Abstract

Aromatic amines, such as benzidine and 3,3'-dichlorobenzidine, are chemicals used in the pigment and dye processes. Release of these compounds into the environment is important because of their carcinogenic and toxic nature. In the present study, the sediment and water samples were collected from Lake Macatawa (Holland, MI, USA) and subsequently spiked with benzidine. The grain size distribution of the sediment samples investigated here ranged in composition from sandy to silty-clay sediment types. The sediment-water systems spiked with benzidine were incubated under anaerobic conditions at 4, 15, and 23 degrees C for 211 d. Degradation of benzidine was observed over the time-course analysis of the sediment-water mixtures. Three possible metabolites (aniline, 2-ethyl-1-hexanol, and 1-amino-2-hexene) were observed during this investigation as a result of gas chromatography/mass spectrometry and liquid chromatography/mass spectrometry. No metabolites were observed in autoclaved bottles, suggesting that the transformation of benzidine in the sediment-water mixtures was the result of microbial activity. From sediment-water distribution experiments, benzidine demonstrated higher sorption affinity for the different sediment phases than its degradation product, aniline. Therefore, microbially mediated transformation of benzidine to aniline is expected to yield a greater total concentration of the more mobile compound, aniline, in the water phase and a greater possibility for transport of aniline in the water phase.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Joel Harden, Amy Jewell, Francis P Donaldson, Marianne C Nyman. 2006. Benzidine transformation processes in natural sediments.. https://doi.org/10.1897/05-274r.1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Removal of organic pollutants from 2,2',5,5'-tetrachlorobenzidine (TCB) industrial wastewater by micro-electrochemical oxidation and air-stripping.

A feasible method for treatment of the wastewater from the two-staged neutralization in 2,2',5,5'-tetrachlorobenzidine (TCB) manufacturing processes, a refractory dye intermediate effluents, based on combined micro-electrochemical oxidation or iron-chipping filtration (ICF) and air-stripping reactor (ASR), was developed. On conditions of HRT 1h, pH 3.0 in ICF and HRT 38 h, gas-liquid ratio 15, pH 6.0-8.65, temperature 26 degrees C in ASR, the overall COD, color, TCB and NH(4)(+)-N removal were 96.8%, 91%, 87.61% and 62%, respectively, during the treatment of TCB wastewater from the two-staged neutralization dissolved by methanol. The averaged 18.3%, 81.7% of the total degraded COD, 35.2%, 64.8% of TCB were carried out in ICF and ASR, respectively. NH(4)(+)-N removal was finished mainly in ASR. The experimental results indicated that the combined micro-electrochemical oxidation and air-stripping process performed good treatment of COD, color, TCB and NH(4)(+)-N removal in TCB wastewater from the two-staged neutralization dissolved by ethanol or acetone, came up the discharge standard in China. But the TCB wastewater from the two-staged neutralization dissolved by methanol should be deeply treated before discharged.

Benzidines↗

Electronic, infrared, and 1HNMR spectral studies of the novel charge-transfer complexes of o-tolidine and p-toluidine with alternation pi-acceptors (3,5-dinitro benzoic acid and 2,6-dichloroquinone-4-chloroimide) in CHCl3 solvent.

The rapid interaction between o-tolidine and p-toluidine (pi-donors) with the pi-acceptors, e.g., 3,5-dinitrobenzoic acid (DNB) and 2,6-dichloroquinone-4-chloroimide (DCQ) results in the formation of 1:1 charge-transfer complexes as the final products, [(o-tolidine) (acceptor)] and [(p-toluidine) (acceptor)]. The final products of the reactions have been isolated and characterized using FTIR, 1HNMR spectroscopy and elemental analysis as well as photometric titration. The stoichiometry and apparent formation constants of the complexes formed were determined by applying the conventional spectrophotometric molar ratio method.

Benzidines↗

Detection of gentoxicity of benzidine and its derivatives with the Escherichia coli DJ 702 lacZ reversion mutagenicity assay.

AIMS: The feasibility of Escherichia coli DJ 702 lacZ mutagenicity assay to detect genotoxicity of benzidine and its derivatives was evaluated. METHODS AND RESULTS: DJ 702 strain was grown overnight at 30 degrees C in Luria-Bertani (LB) medium containing some components, such as chloramphenicol, ampicillin, delta-aminolevulinic acid, isopropyl-beta-d-thiogalactoside, and trace element mix. The mixtures of a bacterial culture and tested chemical at indicated doses were incubated at 30 degrees C for 30 min. Subsequently, 2 ml of molten top agar was added and the resulting mixtures were immediately poured onto a minimal lactose (ML) plate. Plates were incubated at 30 degrees C for 48 h. The number of colonies was determined by visual scoring. In this study, results showed that all the tested chemicals were mutagenic to DJ 702 strain. CONCLUSIONS: E. coli lac mutagenicity assay using DJ 702 strain can detect the mutagenicity of benzidine and its derivatives. SIGNIFICANCE AND IMPACT OF THE STUDY: We detected the mutagenicity of benzidine and its derivatives in E. coli lac mutagenicity assay using DJ 702, indicating that this assay may be used to detect benzidine and its derivatives in a powerful, sensitive, and convenient mutagenesis assay.

Benzidines↗