Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 16687150

Method optimization by solid-phase microextraction in combination with gas chromatography with mass spectrometry for analysis of beer volatile fraction.

Olivia Pinho·Isabel M P L V O Ferreira·Lúcia H M L M Santos
View original source ↗Export metadata ↓

Abstract

A simple and sensitive method for the analysis of beer volatile compounds was optimised using headspace solid-phase microextraction (SPME) and gas chromatography with mass detection. Headspace SPME using a 75 microm Carboxen-polydimethylsiloxane (CAR-PDMS) fiber provided effective sample enrichment and enabled extraction of a wide variety of compounds. The reproducibility depended on the compounds, with a mean value of 1.4% for alcohols, 3.3% for ethers, 6.7% for aldehydes, 3.4% for acids, 1.7% for aromatic compounds, 2.4% for esters, 7.4% for hydrocarbons, 1.8% for alicyclic compounds, and 3.4% for heterocyclic compounds. The optimised methodology can be used to compare volatile profile from different types of beers and eventually to study the evolution of a particular beer during aging.

Explore related subjects

BeerGas Chromatography-Mass SpectrometryVolatilizationJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Olivia Pinho, Isabel M P L V O Ferreira, Lúcia H M L M Santos. 2006-05-09. Method optimization by solid-phase microextraction in combination with gas chromatography with mass spectrometry for analysis of beer volatile fraction.. https://doi.org/10.1016/j.chroma.2006.04.013

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Attachment of MAL32-encoded maltase on the outside of yeast cells improves maltotriose utilization.

The fermentation of maltotriose, the second most abundant fermentable sugar in wort, is often incomplete during high-gravity brewing. Poor maltotriose consumption is due to environmental stress conditions during high-gravity fermentation and especially to a low uptake of this sugar by some industrial strains. In this study we investigated whether the use of strains with an alpha-glucosidase attached to the outside of the cell might be a possible way to reduce residual maltotriose. To this end, the N-terminal leader sequence of Kre1 and the carboxy-terminal anchoring domain of either Cwp2 or Flo1 were used to target maltase encoded by MAL32 to the cell surface. We showed that Mal32 displayed on the cell surface of Saccharomyces cerevisiae laboratory strains was capable of hydrolysis of alpha-1,4-linkages, and that it increased the ability of a strain lacking a functional maltose permease to grow on maltotriose. Moreover, the enzyme was also expressed and found to be active in an industrial strain. These data show that expressing a suitable maltase on the cell surface might provide a means of modifying yeast for more complete maltotriose utilization in brewing and other fermentation applications.

Beer↗
PubMed2006

Isolation and characterization of brewer's yeast variants with improved fermentation performance under high-gravity conditions.

To save energy, space, and time, today's breweries make use of high-gravity brewing in which concentrated medium (wort) is fermented, resulting in a product with higher ethanol content. After fermentation, the product is diluted to obtain beer with the desired alcohol content. While economically desirable, the use of wort with an even higher sugar concentration is limited by the inability of brewer's yeast (Saccharomyces pastorianus) to efficiently ferment such concentrated medium. Here, we describe a successful strategy to obtain yeast variants with significantly improved fermentation capacity under high-gravity conditions. We isolated better-performing variants of the industrial lager strain CMBS33 by subjecting a pool of UV-induced variants to consecutive rounds of fermentation in very-high-gravity wort (>22 degrees Plato). Two variants (GT336 and GT344) showing faster fermentation rates and/or more-complete attenuation as well as improved viability under high ethanol conditions were identified. The variants displayed the same advantages in a pilot-scale stirred fermenter under high-gravity conditions at 11 degrees C. Microarray analysis identified several genes whose altered expression may be responsible for the superior performance of the variants. The role of some of these candidate genes was confirmed by genetic transformation. Our study shows that proper selection conditions allow the isolation of variants of commercial brewer's yeast with superior fermentation characteristics. Moreover, it is the first study to identify genes that affect fermentation performance under high-gravity conditions. The results are of interest to the beer and bioethanol industries, where the use of more-concentrated medium is economically advantageous.

Beer↗
PubMed2006

RNA-based sandwich hybridisation method for detection of lactic acid bacteria in brewery samples.

Recently we showed the applicability and sensitivity of the RNA-based sandwich hybridisation assay (SHA) for detection of gram-negative cells in environmental samples [Leskelä, T., Tilsala-Timisjärvi, A., Kusnetsov, J., Neubauer, P., Breitenstein, A., 2005. Sensitive genus-specific detection of Legionella by a 16S rRNA based sandwich hybridization assay. J. Microbiol. Met. 62, 167-179.]. In this study the aim was to test and optimise this method for the detection of gram-positive cells from brewery yeast slurries that contain up to 10(9) yeast cells/ml. Eleven new oligonucleotide probes were designed for group-specific detection of different beer-spoiling lactic acid bacteria of the genera Lactobacillus and Pediococcus. Functionality of the designed probes was shown by testing individual and paired probes using in vitro transcribed 16S rRNA and crude cell extracts as samples. Various simple and fast cell disruption methods were evaluated for the efficient disruption of lactobacilli and pediococci. The applicability of the designed oligonucleotide probes and the SHA for detection of brewery contaminants was demonstrated using both artificial and actual yeast slurry samples from brewery fermentation tanks with either fluorimetric readout or an electric biochip analyser.

Beer↗