Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 1649333

Rotavirus spike structure and polypeptide composition.

I D Anthony·S Bullivant·S Dayal·A R Bellamy·J A Berriman
View original source ↗Export metadata ↓

Abstract

Negatively stained preparations of rotavirus imaged with a low dose of electrons provide sufficient contrast to reveal surface projections or spikes. The number of spikes found projecting from different particles indicates that not all 60 peripentonal sites are occupied. Treatment at pH 11.2 with 250 mM ammonium hydroxide specifically removes the spikes, yielding smooth double-shelled particles of the same diameter as that of the native virus. Protein analysis confirms that the released spikes are composed of polypeptide VP4 (or its two cleavage products VP5* and VP8*) and that the smooth particle retains the other major outer shell protein VP7. Spikeless particles can be decorated by a monoclonal antibody specific for the major immunodominant neutralizing domain of VP7, implying that removal of the spikes does not denature the VP7 that is retained on the surface of the smooth particle.

Explore related subjects

Ammonium HydroxideCapsidCapsid ProteinsCell LineFreeze FracturingHemagglutination, ViralHydrogen-Ion ConcentrationHydroxidesMicroscopy, ElectronRotavirusTrypsinVirionJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

I D Anthony, S Bullivant, S Dayal, A R Bellamy, J A Berriman. 1991. Rotavirus spike structure and polypeptide composition.. https://doi.org/10.1128/jvi.65.8.4334-4340.1991

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Citric-acid-coated magnetite nanoparticles for biological applications.

Water-based magnetic fluids, generally intended for biomedical applications, often have various coating molecules that make them stable and compatible with biological liquids. Magnetic fluids containing iron oxide particles have been prepared by a co-precipitation method, using citric acid as stabilizer. The magnetic particles of the magnetic fluids were obtained by chemical precipitation from ferric (FeCl(3)) and ferrous salts (FeSO(4) or FeCl(2)) in alkali medium (ammonia hydroxide). Citric acid was used to stabilize the magnetic-particle suspension. Physical tests were performed in order to determine various microstructural and rheological features. Transmission electron microscopy was the main investigation method for assessing the magnetic-particle size. The dimensional distribution of the magnetic-particle physical diameter was analyzed using the box-plot statistical method while infrared absorption spectra were used to study the colloidal particle structure. The magnetic-fluid density (picnometric method), viscosity (capillary method) and surface tension (stalagmometric method) were measured using standard methods.

Ammonium Hydroxide↗
PubMed2006

Microbioreactor arrays with integrated mixers and fluid injectors for high-throughput experimentation with pH and dissolved oxygen control.

We have developed an integrated array of microbioreactors, with 100 microL working volume, comprising a peristaltic oxygenating mixer and microfluidic injectors. These integrated devices were fabricated in a single chip and can provide a high oxygen transfer rate (k(L)a approximately 0.1 s(-1)) without introducing bubbles, and closed loop control over dissolved oxygen and pH (+/-0.1). The system was capable of supporting eight simultaneous Escherichia coli fermentations to cell densities greater than 13 g-dcw L(-1) (1 cm OD(650 nm) > 40). This cell density was comparable to that achieved in a 4 litre reference fermentation, conducted with the same strain, in a bench scale stirred tank bioreactor and is more than four times higher than cell densities previously achieved in microbioreactors. Bubble free oxygenation permitted near real time optical density measurements which could be used to observe subtle changes in the growth rate and infer changes in the state of microbial genetic networks. Our system provides a platform for the study of the interaction of microbial populations with different environmental conditions, which has applications in basic science and industrial bioprocess development. We leverage the advantages of microfluidic integration to deliver a disposable, parallel bioreactor in a single chip, rather than robotically multiplexing independent bioreactors, which opens a new avenue for scaling small scale bioreactor arrays with the capabilities of bench scale stirred tank reactors.

Ammonium Hydroxide↗
PubMed2006

NH(4)OH-KOH pulping mechanisms and kinetics of rice straw.

The mechanisms and kinetics of NH(4)OH-KOH mixture pulping rice straw were studied. When aqueous ammonia was mixed with a small amount of caustic potash (ratio of 1:5), three distinct delignification phases were observed in the pulping process: a bulk delignification phase from the beginning of the cooking period to 100 degrees C, a supplementary delignification phase from 100 degrees C to 155 degrees C lasting a further 45 min, and a residual delignification phase until the end of the cooking period. There were two silica removal phases; the first phase was from the beginning of the cooking period to 100 degrees C and the second phase was from 100 degrees C to the end of the cooking period. The rate of delignification reaction was first order with respect to residual lignin and 0.3 order with respect to [OH(-)]. The silica removal was pseudo-first-order with respect to residual silica and 0.6 order with respect to [OH(-)]. The activation energies of the delignification and removal of silica reactions were 35.6 and 30.9 kJ/mol, respectively.

Ammonium Hydroxide↗