Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 16393134

Vitallium.

David Gore·Robert Q Frazer·Robert E Kovarik·Juan E Yepes
View original source ↗Export metadata ↓

Abstract

Vitallium is a base metal alloy that has been used in dentistry and medicine since 1929. This article will focus on the historical perspectives of Vitallium and include the dental and medical applications used today. The physical and chemical properties of Vitallium will be discussed, with particular emphasis on the biocompatibility of the metal. Finally, the future uses of Vitallium will be examined, as will the potential dangers in fabricating prostheses using this base metal alloy.

Explore related subjects

Biocompatible MaterialsDental AlloysDental ImplantsHip ProsthesisHumansMetal Ceramic AlloysProsthesis FailureRisk AssessmentSensitivity and SpecificityVitalliumComparative StudyJournal ArticleReview

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David Gore, Robert Q Frazer, Robert E Kovarik, Juan E Yepes. 2005. Vitallium.. https://doi.org/10.1615/jlongtermeffmedimplants.v15.i6.90

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Effect of sterilization on the physicochemical properties of molded poly(L-lactic acid).

In this study, the process of manufacturing and sterilizing an orthopedic implant constructed from poly(L-lactic acid) (PLLA) was closely simulated. The hydrogen peroxide gas plasma (HPGP) sterilization process was comparatively investigated against ethylene oxide (EtO). Characterization of the physical, thermal, mechanical, morphological, and chemical properties was monitored. The results indicate that the HPGP sterilization process did not have a significant influence on M(n) or M(w) initially or through 12 weeks of in vitro conditioning when compared with EtO. Only indications of physical aging were evident in the analysis of the thermal and mechanical properties by differential scanning calorimeter and tensile testing for each sterilization processes. Using wide angle X-ray diffraction to determine morphology characteristics, it was determined that no changes were observed between the as molded, HPGP, and EtO specimens initially or through the 12 week in vitro conditioning period. Contact angle measurements revealed a significant reduction in the surface energy following treatment by the HPGP process, suggesting the formation of polar groups. However, surface chemistry analysis by ATR-FTIR indicated no significant chemical modification from either sterilization method. PLLA showed intermediate levels of residual hydrogen peroxide absorption following processing by HPGP.

Biocompatible Materials↗
PubMed2007

Equivalences between refractive index and equilibrium water content of conventional and silicone hydrogel soft contact lenses from automated and manual refractometry.

PURPOSE: The purpose of the present study was to develop mathematical relationships that allow obtaining equilibrium water content and refractive index of conventional and silicone hydrogel soft contact lenses from refractive index measures obtained with automated refractometry or equilibrium water content measures derived from manual refractometry, respectively. METHODS: Twelve HEMA-based hydrogels of different hydration and four siloxane-based polymers were assayed. A manual refractometer and a digital refractometer were used. Polynomial models obtained from the sucrose curves of equilibrium water content against refractive index and vice-versa were used either considering the whole range of sucrose concentrations (16-100% equilibrium water content) or a range confined to the equilibrium water content of current soft contact lenses (approximately 20-80% equilibrium water content). RESULTS: Values of equilibrium water content measured with the Atago N-2E and those derived from the refractive index measurement with CLR 12-70 by the applications of sucrose-based models displayed a strong linear correlation (r2 = 0.978). The same correlations were obtained when the models are applied to obtain refractive index values from the Atago N-2E and compared with those (values) given by the CLR 12-70 (r2 = 0.978). No significantly different results are obtained between models derived from the whole range of the sucrose solution or the model limited to the normal range of soft contact lens hydration. CONCLUSIONS: Present results will have implications for future experimental and clinical research regarding normal hydration and dehydration experiments with hydrogel polymers, and particularly in the field of contact lenses.

Biocompatible Materials↗
PubMed2007

Cupric ion release controlled by copper/low-density polyethylene nanocomposite in simulated uterine solution.

The Cu2+ release rate of novel copper/low-density polyethylene composites as an intrauterine device material in the simulated uterine solution was investigated for 280 days. The corrosion products of these composites were identified by the X-ray diffraction method. The distributions of the copper phase and the cuprous oxide phase at different corrosion depths in the composites were measured by the internal standard method. For comparison, copper particles of two sizes were embedded in a polyethylene matrix to form composites. The average copper particle diameter of the nanocomposite was 30 nm, while that of microcomposite was 52 microm. Mechanism of Cu2+ release controlled by the nanocomposite revealed that many clusters composed of copper nanoparticles, which were observed by the field emission scanning electron microscopy in the nanocomposite, led to the formation of large amounts of Cu2O and consequently facilitated the Cu2+ steady release. A scanning electron microscope with energy dispersive X-ray microanalysis mapping technique (SEM/EDX) was employed to measure the corrosion depth and to calculate the life span of the nanocomposite. The result that the nanocomposite displayed a near zero-order release after a month of incubation indicated that the Cu2+ release behavior controlled by nanocomposite was remarkably superior to that by microcomposite.

Biocompatible Materials↗