Search PubMed⌕ Search

PubMed · 15948679

Pathologic tooth migration.

Abstract

Pathologic tooth migration (PTM) is a common complication of moderate to severe periodontitis and is often the motivation for patients to seek periodontal therapy. In this review of the literature, available information concerning prevalence, etiology, treatment, and prevention of pathologic tooth migration is summarized. Prevalence of PTM among periodontal patients has been reported to range from 30.03% to 55.8%. A survey of the literature regarding chief complaints of periodontal patients support these high prevalence findings. The etiology of PTM appears to be multifactorial. Periodontal bone loss appears to be a major factor in the etiology of PTM. Many aspects of occlusion can contribute to abnormal migration of teeth, and more than one of those factors may be present in an individual patient. Soft tissue forces of the tongue, cheeks, and lips are known to cause tooth movement and in some situations can cause PTM. Also considered important in the etiology of PTM is pressure produced from inflammatory tissues within periodontal pockets. Because extrusion is a common form of PTM, clinical observations support the theory that eruption forces sometimes play a role in the etiology of PTM. Many oral habits have been associated with PTM which are often difficult for the therapist to detect. Most cases of severe PTM require a team approach to achieve success. Periodontal, orthodontic, and prosthodontic treatment are often required. Many patient variables enter into the selection of treatment for PTM. In early stages of PTM, spontaneous correction of migrated teeth sometimes occurs after periodontal therapy. Light intrusive forces are used successfully to treat extrusion and flaring forms of PTM. Based on the literature reviewed, it appears that many cases of PTM could be prevented through the early diagnosis and treatment of periodontal disease, occlusal contributing factors, gingival enlargement, and oral habits.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Michael A Brunsvold. 2005. Pathologic tooth migration.. https://doi.org/10.1902/jop.2005.76.6.859

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Evaluation of stress induced in peri-implant bone tissue by misfit in multi-implant prosthesis.

OBJECTIVES: The objective of the present work was to use numerical analysis to evaluate the relevance of stress states induced in peri-implant bone tissue by a misfit in a dental fixed prosthesis. Misfits in both mesial-distal and lingual-labial directions were considered to investigate a realistic configuration of the problem. MATERIALS AND METHODS: A finite element model of a portion of a mandible with two implants connected by a gold alloy bar was defined on the basis of the morphometric data of a partial edentulous patient. A specific procedure was developed to represent the bar-implant coupling in the case of a misalignment between the implant and central axes of the anchoring site to the bar. Loading conditions related to occlusal forces were also considered. RESULTS: The numerical analysis of the implant-bridge misfit showed significant stress effects on the peri-implant bone tissue. For the specific prosthetic configuration considered, the maximum compressive stress was in the range of 40-60 MPa, depending on the misfit considered. The stress level was largely affected by the axial and bending stiffness characteristics of bar-implant compound. SIGNIFICANCE: Stress analysis using numerical methods made it possible to estimate stress states with high accuracy in terms of intensity and location. For the case considered, stress induced by misfit was comparable with that related to occlusal forces. Therefore, a possible bar-implant misfit should be carefully considered to ensure the reliability of the prosthetic system.

Bite Force↗

The influence of simulated masticatory loading regimes on the bi-axial flexure strength and reliability of a Y-TZP dental ceramic.

OBJECTIVES: The purpose of the current study was to examine the influence of simulated masticatory loading regimes, to which all-ceramic crown or bridge restorations will routinely be subjected during their service-life, on the performance of a yttria-stabilised tetragonal zirconia polycrystalline (Y-TZP) dental ceramic. METHODS: Ten sets of 30 Y-TZP ceramic discs (13 mm diameter, 1.48-1.54 mm thickness) supplied by the manufacturer were randomly selected. Six groups were loaded for 2000 cycles at 500 N (383-420 MPa), 700N (536-588 MPa) and 800 N (613-672 MPa) with three groups maintained dry and the remaining three groups loaded while immersed in water at 37+/-1 degrees C. A further two groups underwent extended simulated masticatory loading regimes at 80 N (61-67 MPa) for 10(4) and 10(5)cycles under dry conditions. The mean bi-axial flexure strengths, standard deviations and associated Weibull moduli (m) were determined. The surface hardness was also determined using the Vickers hardness indentation technique. RESULTS: No significant difference (P>0.05) was identified in the bi-axial flexure strength of the simulated masticatory loading regimes and the control specimens loaded dry or wet. A significant increase in m was identified for the Y-TZP specimens following loading while immersed in water (8.6+/-1.6, 8.5+/-1.6 and 10.3+/-1.9) compared with the control (7.1+/-1.3). However, the extended loading regime to 10(5)cycles resulted in a significant reduction in the m of the Y-TZP specimens (5.3+/-1.0) compared with the control. Localised areas of increased surface hardness were identified to occur directly beneath the spherical indenter. CONCLUSIONS: The occurrence of localised areas of increased surface hardness could be the result of either a transformation toughening mechanism or crushing and densification of the material beneath the indentor manifested as the formation of a surface layer of compressive stresses that counteracted the tensile field generated at the tip of a propagating crack which increased the Weibull modulus of the Y-TZP specimens. The reduced reliability of the Y-TZP specimens loaded to 80 N for 10(5)cycles was associated with the accumulation of subcritical damage as a result of the extended nature of loading.

Bite Force↗

Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures.

OBJECTIVES: This in vitro study tested the influence of diverse stress simulation parameters on the fracture strength of all-ceramic three-unit fixed partial dentures (FPDs). METHODS: All-ceramic FPDs made of Empress 2 (Ivoclar-Vivadent, FL) were exposed to thermal cycling and mechanical loading (TCML) with varying loading parameters such as chewing force (amount, frequency), thermal loading, lateral jaw motion, abutment material, artificial periodontium or antagonistic denture. To investigate the influence of the abutment material, human teeth, polymer abutments and alloy abutments were used. Two different TCML devices with pneumatic or weight loading were compared. FPDs without aging were used as a control. RESULTS AND SIGNIFICANCE: Combined thermal and mechanical loading significantly reduced the FPD fracture resistance from 1832N to 410N. Duplication of chewing frequency, phase load increase or additional lateral movement did not effect the results. Increasing chewing force, artificial periodontium, and antagonist or abutment material reduced the fracture resistance of the tested FPDs. Different devices with weight or pneumatic loading had no significant influence on the loading capacity of the FPDs. Artificial aging should be performed combining thermal cycling with mechanical loading. Simulation of the artificial periodontium, human antagonists and abutments should be included to achieve a significant aging.

Bite Force↗