Search PubMed⌕ Search

PubMed · 15941191

Environmentally smart polymers.

Abstract

Much progress has been made in the synthesis of polymers that emulate certain naturally occurring polymers and demonstrate exquisite sensitivity to environmental factors such as temperature, pH and mechanical stress. This article explains how these are finding use in medical technologies such as drug delivery and cell-sheet tissue engineering.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David Williams. 2005. Environmentally smart polymers.. https://pubmed.ncbi.nlm.nih.gov/15941191/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

In vitro and in vivo testing of bioabsorbable antibiotic containing bone filler for osteomyelitis treatment.

The use of local antibiotics from a biodegradable implant is appealing concept for treatment of chronic osteomyelitis. Our aim was to develop a new drug delivery system based on controlled ciprofloxacin release from poly(D/L-lactide). Cylindrical composite pellets (1.0 x 0.9 mm) were manufactured from bioabsorbable poly(D/L-lactide) matrix and ciprofloxacin (7.4 wt %). In vitro studies were carried out to delineate the release profile of the antibiotic and to verify its antimicrobial activity by means of MIC testing. A long-term study in rabbits was performed to validate the release of ciprofloxacin from the composite in vivo. Therapeutic level of ciprofloxacin (>2 microg/mL) was maintained between 60 and 300 days and the concentration remained below the potentially detrimental level of 20 microg/mL in vitro. The released ciprofloxacin had retained its antimicrobial properties against common pathogens. In an exploratory long-term in vivo study with three rabbits, ciprofloxacin could not be detected from the serum after moderate filling (160 mg) of the tibia (follow-up 168 days), whereas after high dosing (a total dose of 1,000 mg in both tibias) ciprofloxacin was found temporarily at low serum concentrations (14-34 ng/mL) during the follow-up of 300 days. The bone concentrations of ciprofloxacin could be measured in all samples at 168 and 300 days. The tested copolylactide matrix seems to be a promising option in selection of resorbable carriers for sustained release of antibiotics, but the composite needs modifications to promote ciprofloxacin release during the first 60 days of implantation.

Absorbable Implants↗

In vivo biodegradability and biocompatibility evaluation of novel alanine ester based polyphosphazenes in a rat model.

Amino acid ester substituted polyphosphazenes are attractive candidates for various biomedical applications because of their biocompatibility, controllable hydrolytic degradation rates, and nontoxic degradation products. In this study, the biocompatibility of three L-alanine ethyl ester functionalized polyphosphazenes was evaluated in a subcutaneous rat model. The polymers used in the study were poly[bis(ethylalanato)phosphazene] (PNEA), poly[(50% ethylalanato) (50% methylphenoxy) phosphazene] (PNEA(50)mPh(50)), and poly[(50% ethylalanato)(50% phenyl phenoxy) phosphazene] (PNEA(50)PhPh(50)). Polymer disks of diameter 7.5 mm were prepared by a solvent evaporation technique and were implanted subcutaneously in rats. After 2, 4, and 12 weeks, the polymer along with the surrounding tissues were excised, prepared, and viewed by light microscopy to evaluate the tissue responses of the implanted polymers. The tissue responses were classified as minimal, mild, or moderate, based on a biocompatibility scheme developed in our laboratory. Minimal inflammation was characterized by the presence of few neutrophils, erythrocytes, and lymphocytes; mild response was characterized by the predominant presence of macrophages, fibroblasts, or giant cells; and moderate inflammation was characterized by the abundance of macrophages, giant cells, and by the presence of tissue exudates. The in vivo degradation profiles of the polymers at various time points were evaluated by gel permeation chromatography (GPC). PNEA and PNEA(50)mPh(50) matrices elicited varying levels of tissue responses during the 12-week implantation period. At 2 weeks both polymers evoked a moderate response, and by 12 weeks the response was found to be mild. However, PNEA(50)PhPh(50) elicited a mild response at the end of 2 weeks and demonstrated a further decreased inflammatory response after 12 weeks. The in vivo degradation of the polymers was followed by determining the molecular weights of the explanted polymer disks. PNEA and PNEA(50)mPh(50) disks showed significant decrease in molecular weight after 2 weeks of implantation. The molecular weights of PNEA and PNEA(50)mPh(50) residues could not be determined by GPC after 12 weeks of implantation because of almost complete degradation. On the other hand the in vivo degradation of PNEA(50)PhPh(50) was found to be slow, with a 63% loss in molecular weight in 12 weeks. Furthermore, this polymer maintained its shape and structure during the entire study. Thus, these polymers demonstrated excellent tissue compatibility and in vivo biodegradability and can be potential candidates for various biomedical applications.

Absorbable Implants↗

Regeneration of bicortical defects in the iliac crest of estrogen-deficient sheep, using new biodegradable polyurethane bone graft substitutes.

Porous scaffolds for cancellous bone graft substitutes were prepared from new experimental biodegradable aliphatic polyurethane elastomers with varying hydrophilicity. The ratios of the hydrophilic-to-hydrophobic content in the polymers were 30-70, 50-50, and 70-30%, respectively. The hydrophilic component consisted of poly(ethylene oxide) diol and the hydrophobic component of poly(epsilon-caprolactone) diol. To promote the materials' biological performance, the calcium complexing moiety, the polysaccharide, and vitamin D(3) were incorporated into the polymer chain upon synthesis. The scaffolds had an interconnected porous structure with an average pore size in the range of 300-2,000 microm and pore-to-volume ratios of (85 +/- 5)%. The bone substitutes were implanted (press-fit) in biocortical 10 x 10 mm(2) defects created in the tuber coxae of 21 skeletally mature Warhill ewes, which were ovariectomized 12 months prior to implantation. At the time of euthanasia at 18 and 25 months, all the defects in the ilium implanted with polyurethane bone substitutes had healed with new bone. The extent of bone healing depended on the chemical composition of the polymer from which the implant was made, although for the same material there were animal-related differences in healing. The structure of the newly formed cancellous bone was radiographically and histologically similar to the native bone. The implants from polymers with the incorporated calcium-complexing additive were the most effective promoters of bone healing, followed by those with vitamin D(3) and polysaccharide-containing polymer. There was no bone healing in the control defects.

Absorbable Implants↗