PubMed · 15886448
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M S Bobji. 2005. Springing the trap.. https://doi.org/10.1007/bf02703692
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
In two-dimensional (2D) kinematic studies, limb positions in three-dimensional (3D) space observed in lateral view are projected onto a 2D film plane. Elbow and knee-joint angles that are less than 20 degrees out-of-plane of lateral-view cameras generally exhibit very little measurable difference from their 3D counterparts (Plagenhoef 1979 Environment, Behavior, and Morphology; New York: Gustav Fisher, p. 95-118). However, when limb segment angles are more than 20 degrees out-of-plane, as is often the case in locomotor studies of arboreal primates, elbow and knee angles can appear significantly more extended than they actually are. For this reason, a methodology is described that corrects 2D out-of-plane angular estimates using a series of trigonometric transformations.
Several methods are available for reconstruction of bone defects due to malignant tumors. To extracorporally devitalize resected tumor-bearing bone segments two methods, that is, extracorporal irradiation or autoclaving, are available up to now. However, both methods have substantial disadvantages like decrease of bone's mechanical strength. To develop an alternative method for tumor inactivation in skeletal segments, high hydrostatic pressure (HHP) was applied. Previous investigations have shown that human normal and tumor cell lines as well as tumor-afflicted human bone specimens were irreversibly damaged at 350 MPa when subjected to HHP. This study was aimed to examine the alterations of biomechanical properties of human bone after exposure to HHP. Trabecular and cortical bone specimens were harvested from six pair of fresh-frozen human cadaveric femora. The bone specimens from one side were exposed to different pressure values of 300 or 600 MPa over 10 min. Bone samples from the contralateral sites were used as untreated controls. Biomechanical properties were investigated by a quasi-static compression test for trabecular specimens and by a quasi-static four-point bending test for cortical specimens, respectively. Biomechanical properties of the cortical and trabecular bone did not decrease after exposure to 300 MPa regarding the testing parameters Young's modulus and ultimate strength (200.7 +/- 38.7 MPa for HHP treated cortical bone versus 186.5 +/- 34.3 MPa for the untreated control group). After pressure treatment at 600 MPa Young's modulus and ultimate strength respectively remained almost unchanged in trabecular bone and were reduced about 15% in cortical bone (p < 0.001 and p =0.002, respectively). We anticipate that in orthopedic surgery HHP can serve as a novel, promising methodical approach for tumor cell inactivation, which occurs at pressure levels of about 300 MPa. Thereby immediate reimplantation of treated bone segments by preservation of the essential biomechanical properties of bone could become possible. Even after HHP treatment at 600 MPa the strength of bone only decreases up to 15%.
Fiber-reinforced composites (FRCs) show great promise as long-term restorative materials in dentistry and medicine. Recent evidence indicates that these materials degrade in vivo, but the mechanisms are unclear. The objective of this study was to investigate mechanisms of deterioration of glass fiber-polymer matrix bond strengths in dental fiber-reinforced composites during hydrothermal and mechanical aging. Conventional three-point bending tests on dental FRCs were used to assess flexural strengths and moduli. Micro push-out tests were used to measure glass fiber-polymer matrix bond strengths, and nanoindentation tests were used to determine the modulus of elasticity of fiber and polymer matrix phases separately. Bar-shaped specimens of FRCs (EverStick, StickTech, and Vectris Pontic, Ivoclar-Vivadent) were either stored at room temperature, in water (37 and 100 degrees C) or subjected to ageing (10(6) cycles, load: 49 N), then tested by three-point bending. Thin slices were prepared for micro push-out and nanoindentation tests. The ultimate flexural strengths of both FRCs were significantly reduced after aging (p < 0.05). Both water storage and mechanical loading reduced the interfacial bond strengths of glass fibers to polymer matrices. Nanoindentation tests revealed a slight reduction in the elastic modulus of the EverStick and Vectris Pontic polymer matrix after water storage. Mechanical properties of FRC materials degrade primarily by a loss of interfacial bond strength between the glass and resin phases. This degradation is detectable by micro push-out and nanoindentation methods.