PubMed · 1588058
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
H B Skinner. 1992. Current biomaterial problems in implants.. https://pubmed.ncbi.nlm.nih.gov/1588058/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The degradation rate of poly(lactic acid) (PLA) is typically modified by copolymerization of the glycolide with lactide. In the present study, the degradation rate of PDLLA was modified by a novel linking of PLA with 2,2'-bis(2-oxazoline). This modification resulted in formation of a more rapidly degrading poly(ester amide) (PEA) for controlled drug release. The hydrolytic degradation of PDLLA and PEA films was studied in PBS (pH 7.4, USP XXIV, 37 degrees C); the resulting decrease in molecular weight was determined by size exclusion chromatography and the weight loss of films was measured. Drug releases of guaifenesin (mw 198.2), timolol (mw 332.4), sodium salicylate (mw 160.1) and FITC-dextran (mw 4400) from PDLLA and PEA films and microspheres were examined in PBS (pH 7.4, 37 degrees C). The degradation rate of PEA was substantially greater than that of PDLLA. The release profiles of all small model drugs (mw <332.4) from PDLLA films were biphasic or triphasic, while the release profiles of small model drugs from PEA films varied extensively. Due to the faster weight loss of PEA, FITC-dextran (mw 4400) was released substantially more rapidly from PEA microspheres than from PDLLA microspheres. In conclusion, all model drugs, except guaifenesin, were released faster from PEA preparations than from PDLLA preparations.
The objective of this study was to investigate the influence of physiochemical parameters (such as size, molecular weight, molecular geometry, and number of surface amine groups) of poly (amidoamine) (PAMAM) dendrimers, on their permeability across Caco-2 cell monolayers. The permeability of a series of PAMAM dendrimers, generations 0-4 (G0-G4), was investigated across Caco-2 cell monolayers in both the apical to basolateral (AB) and basolateral to apical (BA) directions. The influence of PAMAM dendrimers on the integrity, paracellular permeability, and viability of Caco-2 cell monolayers was also monitored by measuring the transepithelial electrical resistance (TEER), mannitol permeability, and leakage of lactate dehydrogenase (LDH) enzyme, respectively. G0, G1 and G2 demonstrated similar AB permeabilities, which were moderate several fold higher than the AB permeability of higher generations. The AB and BA permeability of G0-G4 typically increased with the increase in donor concentration and incubation time. Permeability values are not reported at generations, concentrations or incubation times that the dendrimers were toxic to Caco-2 cells. TEER values decreased and mannitol permeability increased as a function of donor concentration, incubation time, and generation number. LDH results for G3 and G4 indicate that Caco-2 cell viability was reduced with increasing donor concentration, incubation time, and generation number. The appreciable permeability of G0-G2, coupled with their nontoxic effects on Caco-2 cells, suggest their potential as water-soluble polymeric drug carriers for controlled oral drug delivery.
Linear, biodegradable, aliphatic polyurethanes with various degrees of hydrophilicity were synthesized in bulk at 50-100 degrees C. The ratios between the hydrophilic and hydrophobic segments were 0:100, 30:70, 40:60, 50:50, and 70:30, respectively. The hydrophilic segment consisted of poly(ethylene oxide) (PEO) diol (molecular weight = 600 or 2000) or the poly(ethylene-propylene-ethylene oxide) (PEO-PPO-PEO) diol Pluronic F-68 (molecular weight = 8000). The hydrophobic segment was made of poly(epsilon-caprolactone) diol (molecular weight = 530, 1250, or 2000). The chain extenders were 1,4-butane diol and 2-amino-1-butanol. The diisocyanate was aliphatic hexamethylene diisocyanate. The polymers absorbed water in an amount that increased with the increasing content of the PEO segment in the polymer chain. The total amount of absorbed water did not exceed 2% for the poly(ester urethane)s and was as high as 212% for some poly(ester ether urethane)s that behaved in water like hydrogels. The polymers were subjected to in vitro degradation at 37 +/- 0.1 degrees C in phosphate buffer solutions for up to 76 weeks. The poly(ester urethane)s showed 1-2% mass loss at 48 weeks and 1.1-3.8% mass loss at 76 weeks. The poly(ester ether urethane)s manifested 1.6-76% mass loss at 48 weeks and 1.6-96% mass loss at 76 weeks. The increasing content and molecular weight of the PEO segment enhanced the rate of mass loss. Similar relations were also observed for polyurethanes from PEO-PPO-PEO (Pluronic) diols. Materials obtained with 2-amino-1-butanol as the chain extender degraded at a slower rate than similar materials synthesized with 1,4-butane diol. All the materials already manifested a progressive decrease in the molecular weight in the first month of in vitro aging. The rate of molecular weight loss was higher for poly(ester ether urethane)s than for poly(ester urethane)s. For poly(ester ether urethane)s, the rate of molecular weight loss was higher for materials containing Pluronic than for those containing PEO segments. All polymers calcified in vitro. The susceptibility to calcification increased with material hydrophilicity. The progressive deposition of calcium salt on the film surfaces resulted in the formation of large crystal aggregates, the structure of which depended on the chemical composition of the calcified material. Needle-like aggregates, resembling brushite, formed on the hydrophobic polyurethane, and plate-like crystals formed on the highly hydrophilic material. The calcium-to-phosphorus atomic ratio of the crystals growing on the samples was dependent on the chemical composition of the material and varied from 0.94 to 1.55.