Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 15685599

Flow pattern visualization in a mimic anaerobic digester using CFD.

Mehul S Vesvikar·Muthanna Al-Dahhan
View original source ↗Export metadata ↓

Abstract

Three-dimensional steady-state computational fluid dynamics (CFD) simulations were performed in mimic anaerobic digesters to visualize their flow pattern and obtain hydrodynamic parameters. The mixing in the digester was provided by sparging gas at three different flow rates. The gas phase was simulated with air and the liquid phase with water. The CFD results were first evaluated using experimental data obtained by computer automated radioactive particle tracking (CARPT). The simulation results in terms of overall flow pattern, location of circulation cells and stagnant regions, trends of liquid velocity profiles, and volume of dead zones agree reasonably well with the experimental data. CFD simulations were also performed on different digester configurations. The effects of changing draft tube size, clearance, and shape of the tank bottoms were calculated to evaluate the effect of digester design on its flow pattern. Changing the draft tube clearance and height had no influence on the flow pattern or dead regions volume. However, increasing the draft tube diameter or incorporating a conical bottom design helped in reducing the volume of the dead zones as compared to a flat-bottom digester. The simulations showed that the gas flow rate sparged by a single point (0.5 cm diameter) sparger does not have an appreciable effect on the flow pattern of the digesters at the range of gas flow rates used.

Explore related subjects

Bacteria, AnaerobicBiomassBioreactorsComputer SimulationRheologyWaste Disposal, FluidWater MovementsJournal ArticleResearch Support, U.S. Gov't, Non-P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mehul S Vesvikar, Muthanna Al-Dahhan. 2005-03-20. Flow pattern visualization in a mimic anaerobic digester using CFD.. https://doi.org/10.1002/bit.20388

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Biological hydrogen production in a UASB reactor with granules. II: Reactor performance in 3-year operation.

The experiment was conducted to evaluate the performance of an upflow anaerobic sludge blanket (UASB) with granules for H(2) production from a sucrose-rich synthetic wastewater at various substrate concentrations (5.33-28.07 g-COD/L) and hydraulic retention times (HRTs) (3-30 h) for over 3 years. The kinetics of H(2) production was evaluated, and the sludge yield and endogenous decay coefficient of the H(2)-producing granules were estimated to be 0.334 g-VSS/g-COD and 0.004/h, respectively. Based on Gibbs free energy calculations, the formation thermodynamics of caproate, an important aqueous product, were analyzed. Experimental results show that the H(2) partial pressure in biogas decreased with increasing substrate concentration, but was not sensitive to the variation of HRT in a range of 6-22 h. The H(2) production rate increased with increasing substrate concentration, but decreased with increasing HRT. The H(2) yield was in the range of 0.49-1.44 mol-H(2)/mol-glucose. Acetate, butyrate, caporate, and ethanol were the main aqueous products in the reactor, and their concentrations were dependent on both substrate concentration and HRT. An elevated substrate concentration resulted in a shift of fermentation from butyrate- to caporate-type in the reactor and the formation of caproate was dependent on the H(2) partial pressure. The 3-year experimental results demonstrate that H(2) could be produced continuously and stably from the acidogenic-granule-based UASB reactor.

Bacteria, Anaerobic↗
PubMed2006

Biological hydrogen production in a UASB reactor with granules. I: Physicochemical characteristics of hydrogen-producing granules.

Hydrogen-producing granules with an excellent settling ability were cultivated in an upflow anaerobic sludge blanket reactor treating a sucrose-rich synthetic wastewater. The physicochemical characteristics of granules were evaluated in this study. The mature granules had a diameter ranging from 1.0 to 3.5 mm and an average density of 1.036 +/- 0.005 g/mL, whereas they had good settling ability and a high settling velocity of 32-75 m/h. The low ratio of proteins/carbohydrates for the extracellular polymeric substances (EPS) in the granules suggests that carbohydrates rather than proteins, might play a more important role in the formation of the H(2)-producing granules. The contact angle of the mature granules, 54 +/- 2 degrees , was larger than that of the seed sludge (38 +/- 2 degrees ), indicating that the microbial cells in the H(2)-producing granules had higher hydrophobicity. The granules had fractal nature with a fractal dimension of 1.78. Their porosities were in the range of 0-0.70, and increased with increasing granule size. The ratios between the observed and predicted settling velocities by Stokes' law were in a range of 1.00-1.50, and the fluid collection efficiency of the granules ranged from 0 to 0.19, indicating that their permeabilities were lower and that there was little advective flow through their interior. Experimental results also suggest that molecular diffusion appeared to play an important role in the mass transfer through the H(2)-producing granules.

Bacteria, Anaerobic↗
PubMed2006

Biohydrogen production in granular up-flow anaerobic sludge blanket (UASB) reactors with mixed cultures under hyper-thermophilic temperature (70 degrees C).

Hyper-thermophilic hydrogen production without methane was demonstrated for the first time in granular up-flow anaerobic sludge blanket (UASB) system fed with glucose using mixed cultures. The maximum hydrogen yield in this study was 2.47 +/- 0.15 mol H2/mol glucose. This high yield has never been previously reported in mixed culture systems and it was likely due to more favorable thermodynamic conditions at hyper-thermophilic temperatures. Different start-up strategies (bromoethanosulfonate (BES) addition and flow recycle) were evaluated. BES addition during start-up prevented the establishment of methanogenic cultures in granules. Flow recycle was important to achieve higher hydrogen yield through enriching better hydrogen-producing organisms and reduced the start-up period as well. This study indicated UASB system was a promising system for hydrogen production.

Bacteria, Anaerobic↗