PubMed · 15658378
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
Yasunori Kitamoto, Kimio Tomita. 2004. [Phenol].. https://pubmed.ncbi.nlm.nih.gov/15658378/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
An analytical methodology for the analysis of four polar organophophorus pesticides (monocrotophos, mevinphos, phosphamidon, omethoate) in water and soil samples incorporating a molecularly imprinted solid-phase extraction (MISPE) process using a monocrotophos-imprinted polymer was developed. Binding study demonstrated that the polymer showed excellent affinity and high selectivity to monocrotophos. The MISPE procedure including the clean-up step to remove any interferences was optimized. The accuracy and selectivity of the MISPE process developed were verified using a non-imprinted (blank) polymer and a classical ENVI-18 cartridge as the SPE matrix during control experiments. The use of MISPE improved the accuracy and precision of the GC method and lowered the limit of detection. The recoveries of four polar organophosphorus pesticides (OPPs) extracted from 1 L of river water at a 100 ng/L spike level were in the range of 77.5-99.1%. The recoveries of organophosphorus pesticides extracted from a 5-g soil sample at the 100 microg/kg level were in the range of 79.3-93.5%. The limit of detection varied from 10 to 32 ng/L in water and from 12 to 34 microg/kg in soil samples. The molecularly imprinted polymer (MIP) enabled the selective extraction of four organophosphorus pesticides successfully from water and soil samples, demonstrating the potential of molecularly imprinted solid-phase extraction for rapid, selective, and cost-effective sample pretreatment.
Semipermeable membrane devices (SPMD) represent a passive sampling technology that is becoming widely used for monitoring of surface waters pollution. While "classic" procedures employ dialysis to recover target compounds from exposed SPMDs, in the present study analytes were isolated from cut membrane together with sequestering medium (triolein) using hexane as an extraction solvent. This approach allowed us to reduce the time needed for accomplishment of isolation step from 48 h to only 1 h. Automated gel permeation chromatography (GPC) clean-up is employed in the following step to separate triolein from analytes fraction. Musk compounds (MCs), polychlorinated biphenyls (PCBs), brominated flame retardants (BFRs) and several other persistent organochlorine compounds (OCs) were determined in the respective fraction by GC method employing selective detectors (MSD, ECD). As shown in a series of analyses of SPMDs deployed in various aquatic ecosystems, high recoveries and good repeatability of results together with a possibility to obtain the information on the pollution of sampling site at the day of sample arrival to laboratory make this newly implemented procedure an interesting alternative to time consuming dialysis.
Comprehensive two-dimensional gas chromatography with micro electron-capture detection (GCxGC-muECD) was evaluated for the separation of 125 polybrominated diphenyl ethers (PBDEs). From among the six column combinations that were evaluated, DB-1x007-65HT was found to be the most suitable because of: (i) the highest number of BDE congeners separated; (ii) the least decomposition of higher brominated congeners; and (iii) the most suitable maximum operating temperature. The separation of the 125 BDE congeners from five hydroxy- and two methoxy-BDEs and nine other brominated flame retardants (polybrominated biphenyls, tetrabromobisphenol-A, methyl-tetrabromobisphenol-A and hexabromocyclododecane) was also studied. Fluorinated BDEs were found to be valuable internal standards for the determination of BDEs because of their very similar physico-chemical properties and excellent separation from the parent BDEs, mainly in the second dimension. GCxGC-time-of-flight MS and GCxGC-muECD were shown to be useful tools to identify decomposition products of nona- and deca-substituted BDEs, which are formed during the GC run. Three nona-BDEs were shown to be the major decomposition products of BDE 209.