Beryllium sampling methods.

H M Donaldson; W T Stringer

doi:10.1080/15298668091424410

Home/Archive/PubMed

PubMed · 15508481

Beryllium sampling methods.

H M Donaldson·W T Stringer

View original source ↗Export metadata ↓

Abstract

Three sampling methods for airborne beryllium are compared to validate observations made in a 1973 National Institute for Occupational Safety and Health (NIOSH) industrywide study of the beryllium industry which indicated that, in general, the three methods yielded different results for samples taken in the same environment. Under NIOSH contract a beryllium production facility was sampled in 1974 by the Atomic Energy Commission (AEC) personal total and personal respirable sampling methods over a period of one year. All samples were analyzed by atomic absorption spectroscopy. Statistical analysis of the resulting data by NIOSH confirms the observations made in the 1973 study that samples collected by the three methods produced different results. No reliable relationship was found to exist which would permit conversion of the result obtained by one method to a result obtained by either of the alternate methods. It appears that, in general, for large numbers of samples taken under the same sampling conditions, the values determined by the personal respirable sampling method will be lower than those obtained by the AEC method and the values determined by the personal total sampling method will be greater.

Explore related subjects

Air Pollutants Beryllium Chemical Industry Occupational Health Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

H M Donaldson, W T Stringer. 1980. Beryllium sampling methods.. https://doi.org/10.1080/15298668091424410

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

Stable chloroform emissions in southeastern China: insights from recent observations.

Chloroform (CHCl3) is a short-lived ozone-depleting substance not currently regulated under the Montreal Protocol. Due to the unique meteorological conditions in East Asia, CHCl3 emitted in this region has a greater potential to reach the stratosphere and contribute to ozone depletion. As an essential component of national CHCl3 emissions, southeastern China has attracted increasing attention. However, long-term observational data in this region remain relatively scarce, with no updates since 2020. In this study, we continuously measured atmospheric CHCl3 concentrations at a remote monitoring station in southeastern China from 1 June 2023 to 31 May 2025. Frequent concentration enhancements were observed during the monitoring period, with mixing ratios ranging from 9.3 to 134.1 ppt and an average value of 36.8 ± 19.7 ppt. Back-trajectory analysis indicated that air masses associated with elevated CHCl3 levels primarily originated from coastal industrial provinces in eastern China. Using the Potential Source Contribution Function and Concentration Weighted Trajectory methods, we identified the Yangtze River Delta (Jiangsu, Anhui, and Zhejiang Provinces) and Jiangxi Province as dominant source regions. Emissions of CHCl3 in southeastern China were estimated using the Tracer Ratio Method to be approximately 30.1 ± 5.3 Gg/yr from 2023-06-01 to 2025-05-31, indicating overall stability relative to earlier estimates and no apparent upward trend. These findings provide updated insights into the current status of CHCl3 emissions in southeastern China and highlight the need for continued monitoring and emission assessment of CHCl3 in East Asia, given its unregulated status and implications for ozone layer recovery.

Air Pollutants↗

PubMed2007

Performance and microbial analysis of defined and non-defined inocula for the removal of dimethyl sulfide in a biotrickling filter.

The performance and microbial communities of three differently inoculated biotrickling filters removing dimethyl sulfide (DMS) were compared. The biotrickling filters were inoculated with Thiobacillus thioparus TK-m (THIO), sludge (HANDS) and sludge + T. thioparus TK-m + Hyphomicrobium VS (HANDS++), respectively. The criteria investigated were length of the start-up period, the maximum elimination capacity, and the effects of intermittent loading rates, low pH, peak loading and very low loading rate on the DMS removal efficiency. The HANDS++ reactor exhibited the best performance considering all treatments. HANDS performed almost equally well as HANDS++, except during the determination of the EC(max), while THIO was generally the least efficient. During stable DMS loading at concentrations of 20 ppmv or lower, all reactors exhibited similar and high removal efficiencies (>99%). Denaturing gradient gel electrophoresis (DGGE) analysis showed the establishment of T. thioparus in the biofilm of all reactors, but not of Hyphomicrobium VS. Quantitative monitoring of the introduced bacterial strains was performed with a newly developed real-time PCR protocol. Initially, the inoculated strains were exclusively found in the reactors in which they were added. Afterwards, however, both strains developed in the biofilm of all three reactors, although T. thioparus attained higher cell densities than Hyphomicrobium. The presence of T. thioparus in THIO was related with the DMS loading rates that were applied, in the sense that intermittent DMS loading and very low DMS loading rates (0.5 ppmv) induced a decrease in gene copy numbers. Real-time PCR and DGGE both gave consistent results regarding the presence of Hyphomicrobium VS and Thiobacillus thioparus TK-m in the reactors. Only real-time PCR could be used to detect bacteria comprising of less than 1.4% of the total bacterial community ( approximately 10(5) copies ring(-1)).

Air Pollutants↗

PubMed2007

Environmental odours assessment from waste treatment plants: dynamic olfactometry in combination with sensorial analysers "electronic noses".

After an overview about the criteria of odour nuisance in different technical laws, about electronic noses analysers and about dynamic olfactometry, in the present paper the authors describe an application of dynamic olfactometry in combination with the determinations of electronic noses. The coordination of the two approaches permits optimisation of the advantages offered by both methods to the measurable and objective evaluation of the odour nuisance from waste treatment plants and chemical plants.

Air Pollutants↗