Search PubMed⌕ Search

PubMed · 15326738

SEBS-based compounds.

Abstract

Styrene-ethylene/butylene-styrene polymers are thermoplastic elastomers that are finding applications in a range of medical devices and increasingly as replacements for poly(vinyl chloride). This article gives an overview of the properties of these materials and discusses their potential.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

K Sipkens. 2000. SEBS-based compounds.. https://pubmed.ncbi.nlm.nih.gov/15326738/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Controlled release of heparin from polypyrrole-poly(vinyl alcohol) assembly by electrical stimulation.

A surface modification technique was developed for the covalent immobilization of poly(vinyl alcohol) (PVA)-heparin hydrogel onto electrically conductive polypyrrole (PPY) film with the objective of achieving controlled release of heparin. First, aldehyde groups were introduced onto PPY film through poly(ethylene glycol) monomethacrylate graft copolymerization and subsequent oxidation in acetic anhydride and dimethyl sulfoxide mixture. Then, the prepared PVA-heparin hydrogel was cast onto the PPY film and covalently immobilized to the film through the reaction between the aldehyde groups on the PPY film and the hydroxyl groups of PVA. X-ray photoelectron spectroscopy was used to characterize the surface-modified film after each stage. The strong attachment of the PVA-heparin layer on the PPY film was confirmed by peel test and scanning electron microscopy. The release behavior of heparin from the substrate with and without electrical stimulation was studied and the experimental results showed that the heparin release rate from the prepared substrate using an electric current of 3.5 mA is twofold higher than that without current.

Biocompatible Materials↗

From MEMS to NEMS with carbon.

Our work in carbon-microelectromechanical systems (C-MEMS) suggests that C-MEMS might provide a very interesting material and microfabrication approach to battery miniaturization, active DNA arrays and a wide variety of chemical and biological sensors. In C-MEMS, photoresist is patterned by photolithography and subsequently pyrolyzed at high-temperatures in an oxygen-free environment. We established that it is possible to use C-MEMS to create very high-aspect ratio carbon structures (e.g. posts with an aspect ratio >10), suspended carbon plates and suspended carbon nanowires (C-NEMS). By changing the lithography conditions, soft and hard baking times and temperatures, additives to the resist, pyrolysis time, temperature and environment, C-MEMS permits a wide variety of interesting new MEMS and NEMS applications that employ structures having a wide variety of shapes, resistivities and mechanical properties. We also demonstrate that arrays of high-aspect ratio carbon posts can be charged/discharged with Li and this enables the fabrication of a smart switchable array of batteries.

Biocompatible Materials↗

Properties of various phospholipid mixtures as emulsifiers or dispersing agents in nanoparticle drug carrier preparations.

The characteristics of mixed phospholipids were examined when used as dispersing agents and emulsifiers. Synthesized phospholipids were mixed to investigate the potential effects of different hydrophilic or lipophilic groups on emulsification and dispersion. To examine the effects of the hydrophilic polar head group on the dispersing or emulsifying potency of phospholipids, l-alpha-phosphatidylcholine dimyristoyl (DMPC) and l-alpha-phosphatidylethanolamine dimyristoyl (DMPE) were mixed in various ratios. Moreover, all combinations of two kinds of phosphatidylcholines (PCs) out of l-alpha-phosphatidylcholine dilauroyl (DLPC), DMPC, l-alpha-phosphatidylcholine dipalmitoyl (DPPC) and l-alpha-phosphatidylcholine distearoyl (DSPC) were tested (50:50, w/w) to examine the effects of the hydrophobic carbon chains on the dispersing or emulsifying potency of phospholipids. Mean diameters of vesicles and O/W emulsions prepared by sonication were measured. Vesicles prepared with DMPC-DMPE mixtures gave larger particle sizes than those of DMPC alone. Particle sizes of vesicles prepared with a mixture of two kinds of PCs increased when adding a PC with a longer carbon chain, while particle sizes in a mixture with a PC having a shorter carbon chain was comparable to those in pure PC. In vesicles that were generated by hydration of phospholipids and had a bilayer form, the physical form of the phospholipids consisting of bilayers was thought to be an important factor influencing particle sizes. Among the emulsions, DMPC-DMPE mixtures gave a similar droplet size to DMPC alone. Droplet size in emulsions prepared with a mixture of two kinds of PCs had a strong positive correlation with the total number of carbons, which corresponds to hydrophilic-lipophilic balance (HLB). In O/W emulsions, in which phospholipids were absorbed at water-oil interfaces and which have a single layer form, HLB was thought to be a major factor in the determination of particle size; likewise with non-ionic emulsifiers.

Biocompatible Materials↗