PubMed · 15197949
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
Eriko Kinugasa, Hidetoshi Ito. 2004. [Phosphate binding therapy].. https://pubmed.ncbi.nlm.nih.gov/15197949/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.
Use of plasmid DNA (pDNA) in the emerging gene therapy requires pure DNA in large quantities requiring production of safe DNA on large scale. While a number of kit-based DNA purification techniques have become popular, large scale cost effective purification of DNA remains a technological challenge. Most traditional, as well as newly developed methods for DNA purification are expensive, tedious, use toxic reagents, and/or generally not amenable for scaled up production. Our attempts to develop a scalable adsorptive separation technology resulted in successful use of indigenously developed rigid cross-linked cellulose beads for single step purification of pDNA from alkaline cell lysates. This mode of purification employs a combination of intra-particle interactions that could give a product plasmid DNA free from chromosomal DNA, RNA and host proteins in a single scalable chromatographic step. The technology can be employed as a batch adsorption step on small scale, or on a large scale column chromatography. A high copy number 9.8 kb plasmid (from an Escherichia coli strain) was purified in yields of 77 and 52%, respectively in batch and column modes. The product obtained was homogeneous supercoiled plasmid with no RNA and protein contamination confirmed by quantitative analysis, agarose gel electrophoresis and SDS-PAGE.
A synthetic ligand called 2-mercapto-5-benzimidazolesulfonic acid has been successfully used for the specific chromatographic capture of antibodies from a cell culture supernatant. Adsorption occurred at physiological ionic strength and pH range between 5.0 and 6.0, with some binding capacity variations within this pH range: antibody uptake increased when the pH decreased. With very dilute feedstocks, as was the case with the cell culture supernatant under investigation, it was found that the pH had to be slightly lowered to get a good antibody sorption capacity. To optimize separation conditions, a preliminary study was made using ProteinChip Arrays that displayed the same chemical functionalities as the resin. Arrays were analyzed using SELDI-MS. By this mean, it was possible to cross-over simultaneously different pH conditions at the adsorption and the desorption steps. Best conditions were implemented for preparative separation using regular lab-scale columns. At pH 5.2, antibody adsorption was not complete, while at pH 5.0 the antibody was entirely captured. pH 9 was selected at elution, rather than pH 8.0 or 10.0, and resulted in a complete desorption of antibodies from the column. Benefits of the prediction of separation conditions of antibodies on MBI beads using SELDI-MS were a significant reduction in analysis time and in sample volume. This was possible because the separation of IgG on the chip surface did mimic very well the separation on beads.