Search PubMed⌕ Search

PubMed · 14558201

Direct core materials.

Abstract

There are many materials that can be used for direct-placement cores. Although the scientific evidence is incomplete, some materials are better suited to this task than others. This article provides an overview of direct-placement core materials and highlights what clinicians should consider when assessing a new product.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Paul H Wilson, Nigel L Fisher, David W Bartlett. 2003. Direct core materials.. https://doi.org/10.12968/denu.2003.30.7.362

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Alternatives in polymerization contraction stress management.

Polymerization contraction stress of dental composites is often associated with marginal and interfacial failures of bonded restorations. The magnitude of stress depends on composite composition (filler content and matrix composition) and its ability to flow before gelation, which is related to the cavity configuration and curing characteristics of the composite. This article reviews variations among studies regarding contraction-stress-testing methods and contraction stress values of current composites, and discusses the validity of contraction stress studies in relation to results from microleakage tests. The effects of lower curing rates and alternative curing routines on contraction stress values are also discussed, as well as the use of low-elastic-modulus liners. Moreover, studies with experimental dimethacrylate-based composites and recent developments in low-shrinkage monomers are described.

Composite Resins↗

Hydrolytic degradation and cracks in resin-modified glass-ionomer cements.

Water-absorption affects the basic properties of resin-modified glass-ionomer cements (RMGICs). Fick's law is usually invoked to explain the absorption process. The purpose of this study is to show that the absorption in accordance with the Fickian model cannot be extended to the whole of the specimen, and that microcrack formation is the main degradation mechanism for specimens cured in a closed environment. For this purpose, flat disk-shaped paste specimens 1.5 mm thick (aspect ratio 4), irradiated in closed conditions between two glass slides and stored in water for approximately 20 months, were analyzed periodically gravimetrically and under confocal fluorescence microscopy, with absorbed eosin used as the fluorescent probe. At pH 7.0, the specimen surface (10-20 micrometers in depth) absorbed water rapidly, swelled, and disintegrated in 20-40 days. Long-term storage produced isolated cracks and grains, no progress in the swelling, and a slow weight decrease. A lower pH (pH 3.5) produced a significant increase of the number of microcracks. The decrease in the irradiation time (30 s or less) enhanced the erosion process, producing very broad cracks. It was concluded that the prevalent mechanism of long-term hydrolytic degradation was based on the slow formation of cracks, whereas only in the early stage of storage did absorption occur quickly in accordance with the Fickian diffusion.

Composite Resins↗