PubMed · 14318280
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
G VIENNE. 1964-11-23. [ALIGNMENT ARCH IN PLASTIC MATERIAL].. https://pubmed.ncbi.nlm.nih.gov/14318280/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
2,2,2-Trichloroethanol (TCE) incorporated into polyacrylamide gels before polymerization provides fluorescent visible detection of proteins in less than 5min of total processing time. The tryptophans in proteins undergo an ultraviolet light-induced reaction with trihalocompounds to produce fluorescence in the visible range so that the protein bands can be visualized on a 300-nm transilluminator. In a previous study trichloroacetic acid or chloroform was used to stain polyacrylamide gel electrophoresis (PAGE) gels for protein visualization. This study shows that placing TCE in the gel before electrophoresis can eliminate the staining step. The gel is removed from the electrophoresis apparatus and placed on a transilluminator and then the protein bands develop their fluorescence in less than 5min. In addition to being rapid this visualization method provides detection of 0.2microg of typical globular proteins, which for some proteins is slightly more sensitive than the standard Coomassie brilliant blue (CBB) method. Integral membrane proteins, which do not stain well with CBB, are visualized well with the TCE in-gel method. After TCE in-gel visualization the same gel can then be CBB stained, allowing for complementary detection of proteins. In addition, visualization with TCE in the gel is compatible with two-dimensional PAGE, native PAGE, Western blotting, and autoradiography.
To maximize nitrogen utilization rates during nitrification and denitrification in a simultaneous reaction for direct nitrogen removal from ammonia-nitrogen in a single reactor, two different carriers were applied that immobilized nitrifiers and denitrifiers separately. With the optimized DO concentration and mixing ratio of immobilization carriers, ammonium-nitrogen was successfully removed as designed until the middle phase of treatment where nitrogen removal rate was higher than 83% of the theoretical value, although an imbalance between nitrification and denitrification occurred at a later phase of treatment where residual nitrate-nitrogen concentration was less than 2 mg/l. The new approach using two different carriers to immobilize nitrifiers and denitrifiers separately was proved useful for controlling both nitrification and denitrification rates, enabling the utilization of maximum treatment ability of both nitrifiers and denitrifiers in a single reactor for direct nitrogen removal from ammonium-nitrogen.
Monodisperse nanoparticles of poly-N-isopropylacrylamide-co-allylamine (PNIPAM-co-allylamine) and PNIPAM-co-acrylic acid (PNIPAM-co-AA) were synthesized. The close-packed PNIPAM-co-allylamine and PNIPAM-co-AA nanoparticles were converted to three-dimensional gel networks by covalently crosslinking neighboring particles at room temperature and neutral pH using glutaric dialdehyde and adipic acid dihydrazide, respectively. Controlled release studies were conducted using dextran markers of various molecular weights as model macromolecular drugs. Release was quantified under various physical conditions, including a range of temperatures and dextran molecular weights. Dextran, entrapped in cavities in the nanoparticle network, was released with a rate regulated by their molecular weights and cavity size. No release from a conventional bulk PNIPAM gel, with high crosslinking density, was observed. The rate of release from the PNIPAM-co-allylamine network was temperature-dependent, being much faster at room temperature than that at human body temperature. In contrast, release of low molecular weight dextrans from the PNIPAM-co-AA network showed a temperature-independent release profile. These nanoparticle networks have several advantages over conventional bulk gels for controlling the release of high molecular weight biomolecules.