PubMed · 13184813
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
C E ENGEL, P HANSELL. 1954. Gait.. https://pubmed.ncbi.nlm.nih.gov/13184813/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Based on mechanical analysis, three gait descriptors are found which should be controlled to generate cyclic gait of a seven-link humanoid biped in the sagittal plane: (i) step length, (ii) step time, and (iii) the velocity of the center of mass (CoM) at push off. Two of these three gait descriptors can be chosen independently, since the CoM moves almost ballistically during the swing phase. These gait descriptors are formulated as end-point conditions and are regulated by a model predictive controller. In addition, continuous controls at the trunk and knees are implemented to maintain the trunk upright and to ensure weight bearing. The model predictive controller is realized by quadratic dynamic matrix control, which offers the possibility of including constraints that are exposed by the environment and the biped itself. Specifying step length and CoM velocity at push off, the controller generates a symmetric and stable gait. The proposed control scheme serves as a general-purpose solution for the generation of a bipedal gait. The proposed model contains fewer parameters than other models, and they are all directly related to determinants of bipedal gait: step length, trunk orientation, step time, walking velocity, and weight bearing. The proposed control objectives and the model of humanoid bipedal walking have potential applications in robotics and rehabilitation engineering.
The concerted and self-organizing behavior of spinal cord segments in generating locomotor patterns is modulated by afferent sensory information and controlled by descending pathways from the brainstem, cerebellum, or cortex. The purpose of this study was to define a minimal set of parameters that could control a similar self-organizing behavior in a two-dimensional neural network. When we implemented synaptic depression and active membrane repolarization as two properties of the neurons, the two-dimensional neural network generated traveling waves. Their wavelength and angle of propagation could be independently controlled by two parameters that modulated excitatory premotor neurons and inhibitory commissural neurons. It is further demonstrated that the selection of wave parameters corresponds to the selection of quadruped gaits.
Rotating-platform, mobile-bearing total knee replacements have been developed to improve knee kinematics, lower contact stresses on the polyethylene tibial component, minimize constraint, and allow implant self-alignment. The purpose of the current study was to examine some of these parameters. Gait studies during normal gait showed that the stance phase was associated with knee flexion between 8 degrees and 15 degrees. Contact area studies have shown two types of rotating-platform total knee replacements, namely gait congruous (congruous only during the stance phase of gait) and totally congruous (congruous up to 90 degrees knee flexion) implants. Knee simulator studies have shown increased gravimetric wear with rotating-platform total knee replacements compared with their fixed-bearing counterparts. Rotate-only implants had less gravimetric wear than rotate and translate rotating-platform total knee replacements. Clinical studies show similar outcomes (knee scores, range of motion, and complications) when rotating-platform and fixed-bearing total knee replacements are compared. Although attractive, the benefits of rotating-platform total knee replacements still need to be proven.