PubMed · 13131764
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
D SINZ. 1953. [Tonometer holder].. https://pubmed.ncbi.nlm.nih.gov/13131764/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Polymeric membranes are used in industrial and analytical separation techniques. In this study small-angle X-ray scattering (SAXS) with synchrotron radiation has been applied for in-situ characterisation during formation of polymeric membranes. The spinning of a polyetherimide (PEI) hollow fibre membrane was chosen for investigation of dynamic aggregation processes during membrane formation, because it allows the measurement of the dynamic equilibrium at different distances from the spinning nozzle. With this system it is possible to resolve structural changes in the nm-size range which occur during membrane formation on the time-scale of milliseconds. Integral structural parameters, like radius of gyration and pair-distance distribution, were determined. Depending on the chosen spinning parameters, e.g. the flow ratio between polymer solution and coagulant water, significant changes in the scattering curves have been observed. The data are correlated with the distance from the spinning nozzle in order to get information about the kinetics of membrane formation which has fundamental influence on structure and properties of the membrane.
High-density polyethylene pipes (HDPE), crossbonded polyethylene pipes (PEX) and polyvinyl chloride (PVC) pipes for drinking water were tested with respect to migration of volatile organic components (VOC) to water. The odour of water in contact with plastic pipes was assessed according to the quantitative threshold odour number (TON) concept. A major migrating component from HDPE pipes was 2,4-di-tert-butyl-phenol (2,4-DTBP) which is a known degradation product from antioxidants such as Irgafos 168(R). In addition, a range of esters, aldehydes, ketones, aromatic hydrocarbons and terpenoids were identified as migration products from HDPE pipes. Water in contact with HDPE pipes was assessed with respect to TON, and values > or =4 were determined for five out of seven brands of HDPE pipes. The total amount of VOC released to water during three successive test periods were fairly constant for the HDPE pipes. Corresponding migration tests carried out for PEX pipes showed that VOC migrated in significant amounts into the test water, and TON >/=5 of the test water were observed in all tests. Several of the migrated VOC were not identified. Oxygenates predominated the identified VOC in the test water from PEX pipes. Migration tests of PVC pipes revealed few volatile migrants in the test samples and no significant odour of the test water.
The deposition of ionized beams of size-selected atomic clusters onto well-defined substrates represents a new method of preparing nanostructured surfaces, with lateral feature sizes in the range 1-10 nm. 'Pinning' of the incident clusters prevents the diffusion of the clusters on the surface, and thus preserves the gas-phase cluster size, even at room temperature and above. At the same time, advances in diblock copolymer techniques allow the preparation of ordered two-dimensional arrays of clusters. Here we discuss the creation and applications of these nanostructured surfaces, ranging from the fabrication of semiconductor nanostructures to the immobilization of protein molecules.