Cemented hip prostheses: modular screw system.

L Ricciardi; A Perissinotto; G Saggioro; M Dabala; G De Zotti; A Ricciardi

PubMed · 1297579

Cemented hip prostheses: modular screw system.

L Ricciardi·A Perissinotto·G Saggioro·M Dabala·G De Zotti·A Ricciardi

Abstract

The long-term results of 21 patients treated with modular screw cementless hip prostheses are reported. An examination of periprosthetic osteogenesis and function evaluated by gait analysis revealed good incorporation of the prosthesis and good clinical results in all of the cases studied.

Explore related subjects

Bone Cements Bone Screws Follow-Up Studies Hip Prosthesis Humans Osteogenesis Prosthesis Design Surface Properties Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

L Ricciardi, A Perissinotto, G Saggioro, M Dabala, G De Zotti, A Ricciardi. Cemented hip prostheses: modular screw system.. https://pubmed.ncbi.nlm.nih.gov/1297579/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2001

Ultrasonic characterization of the curing process of hydroxyapatite-modified bone cement.

Ultrasonic parameters such as velocity of sound and broad-band ultrasonic attenuation (BUA) are sensitive to changes in the viscoelastic properties of a material. Bone cement undergoes changes is these properties as it cures. By monitoring the propagation of ultrasonic pulses through a sample of curing bone cement, the curing reaction of polymethylmethacrylate-based (PMMA) bone cement was investigated for hydroxyapatite (HA) concentrations of 0, 10, and 30% (by weight). As the material hardens, the velocity of sound increases by 70%. BUA shows a large peak at the midpoint of the velocity transition. These data are used to compare the cure time and cure duration for PMMA bone cement mixed with hydroxyapatite particles. Measurements of the final sound velocity and BUA were also performed to investigate the mechanical properties of the fully cured cement, and to compare to compression testing data. This is the first time the curing process of bone cement has been investigated as a function of hydroxyapatite concentration. Results indicate that the cure time is not significantly affected by the addition of HA particles, and that both velocity of sound and BUA are sensitive to the curing process.

Bone Cements↗

PubMed2001

Preparation and compressive strength of alpha-tricalcium phosphate/gelatin gel composite cement.

A novel alpha-tricalcium phosphate (TCP) and gelatin gel composite cement was prepared, and the effects of gelatin content, liquid/powder ratio, setting time, and additives (rod-like hydroxyapatite and CaTiO3 particles) on the microstructure and compressive strength of the setting product were investigated. Addition of gelatin gel to alpha-TCP cement resulted in the formation of a porous solid possessing pores of 20-100 microm in diameter whose pore diameter increased with increasing gelatin gel content. The compressive strength of alpha-TCP cement after 1 week increased from 9.0 to 14.1 MPa with increasing gelatin gel content up to 5 wt % and thereafter decreased. The compressive strength of the cement containing 5 wt % gelatin gel increased with time up to 35 MPa after 1 month whereas without gelatin gel it was approximately 20 MPa. Dispersion of 5 wt % of rod-like hydroxyapatite and CaTiO3 powders with alpha-TCP cement containing 5 wt % gelatin gel increased the compressive strength after 1 week from 14.1 to 31.3 and 34.8 MPa, respectively.

Bone Cements↗

PubMed2001

A simple method of determining the modulus of orthopedic bone cement.

Accurate determination of the elastic modulus of surgical bone cements is of primary importance, when evaluating the stresses within the cement mantle in Total Joint Arthroplasty. This article presents a new method of determining the modulus of surgical bone cements from the biaxial flexural test. The biaxial flexural test is not currently employed in mainstream orthopedic mechanical testing, which is surprising because most loading in orthopedic applications is biaxial in nature. Nor has this method been utilized for dental materials, even though the biaxial flexure test has been used for many years in this field. It has been demonstrated that the modulus of surgical bone cements can be determined from the biaxial flexural test, and these results are in agreement with results from compressive and bending tests.

Bone Cements↗