Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 12885050

On-site calibration method based on stepwise solid-phase microextraction.

Guohua Xiong·Yong Chen·Janusz Pawliszyn
View original source ↗Export metadata ↓

Abstract

A stepwise solid-phase microextraction (SPME) method was developed for on-site calibration of SPME for volatile organic compounds analysis. In this approach, a 75-microm Carboxen-polydimethylsiloxane coated fibre was loaded with a prior to exposure to samples of interest Extraction time for the target analytes can be controlled independently from that of the standard, and the response factors for the target analytes can be adjusted accordingly. A good reproducibility of the response factors for BTEXs (benzene, toluene, ethylbenzene and xylenes) was obtained with stepwise SPME. Satisfactory results were obtained by using this method for quantitative analysis of BTEXs in the air of a gas station when tetrachloroethylene was used as a standard. The introduction of standard via the stepwise SPME procedure makes SPME more useful in field applications. It can be used to detect leaks, contaminations and losses from loading of a standard onto a fibre to introduction of the fibre to an analytical instrument. However, this method cannot be used for compensation of sample matrix effects.

Explore related subjects

BenzeneBenzene DerivativesCalibrationReference StandardsTolueneXylenesJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Guohua Xiong, Yong Chen, Janusz Pawliszyn. 2003-05-30. On-site calibration method based on stepwise solid-phase microextraction.. https://doi.org/10.1016/s0021-9673(03)00602-2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2003

Substrate inhibition kinetics for toluene and benzene degrading pure cultures and a method for collection and analysis of respirometric data for strongly inhibited cultures.

We present an evaluation of the qualitative and quantitative effects that high concentrations of benzene and toluene have on the growth rate of several pure cultures that use these compounds as their sole carbon and energy source. The cultures employed were five widely studied environmental isolates: Pseudomonas putida F1, P. putida mt2, P. mendocina KR, Ralstonia pickettii PKO1, and Burkholderia cepacia G4. Three cultures degraded toluene following a pattern consistent with the kinetic model of Wayman and Tseng (1976) while the other two followed a modification of this model introduced by Alagappan and Cowan (2001). The pattern followed for benzene degradation was different than that for toluene degradation for all four capable pure cultures and consistent with that described by the model of Luong (1987). Mechanisms of substrate inhibition and solvent toxicity are discussed, used to conceptually evaluate the reasons for the differences in inhibition behavior, and used to support a call for more widespread use of the empirical, terminal substrate concentration inhibition models employed here. We also present the methodology developed to overcome a limitation commonly encountered when attempting to collect oxygen uptake data for use in quantifying substrate inhibition kinetics. The experimental method was effective for use in the collection of high quality data and the substrate inhibition models most useful in representing the growth of bacteria on these solvents are those that show a complete loss of activity at high concentration rather than the more popular asymptotic inhibition models.

Benzene↗
PubMed2003

N-methylformamide-benzene complex as a prototypical peptide N-H...pi hydrogen-bonded system: density functional theory and MP2 studies.

Although the existence of peptide N-H...pi hydrogen bonds recently has been reported in protein structures, little is known about their strength and binding nature and, therefore, the relative importance of the interaction. To shed light on this binding, the N-methylformamide-benzene complex, as a model of the peptide N-H...pi hydrogen bonding, was studied by using density functional theory and Møller-Plesset second-order perturbation (MP2) methods. The geometry of the complex was fully optimized at the B3LYP/6-31G(d,p) and MP2/6-31G(d,p) levels. The optimized interaction distances are about 3.6 and 3.2 A, respectively, at the two levels. The binding energy corrected by basis set superposition error with the MP2/cc-pVTZ method based on the MP2/6-31G geometry is -4.37 kcal/mol, which is as strong as the conventional hydrogen bonding. The calculated results suggest that the peptide N-H...pi hydrogen bonding is of sufficient strength to play an important role in the stabilization of protein structures. These results are helpful to better understand the characteristics and nature of the peptide N-H...pi interaction as well as to modify current force fields to better represent this special interaction.

Benzene↗
PubMed2003

Evidence for very tight sequestration of BTEX compounds in manufactured gas plant soils based on selective supercritical fluid extraction and soil/water partitioning.

Benzene, toluene, ethylbenzene, o-, m-, and p-xylenes (BTEX), and polycyclic aromatic hydrocarbons (PAHs) were extracted from eight manufactured gas plant (MGP) soils from sites that had been abandoned for several decades. Supercritical fluid extraction (SFE) with pure carbon dioxide demonstrated the presence of BTEX compounds that were highly sequestered in both coal gas and oil gas MGP soils and soots. Benzene was generally the slowest compound to extract from all samples and was even more difficult to extract than most two- to five-ring PAHs found on the same samples. Since the solubility of benzene in carbon dioxide is 2-5 orders of magnitude higher than the solubilities of PAHs, these results demonstrate that benzene was more tightly sequestered than toluene, ethylbenzene, xylenes, or the multi-ring PAHs. Additional evidence for very tight binding was based on the fact that BTEX concentrations determined using either SFE or with methylene chloride sonication were much higher than those obtained by the U.S. EPA purge-and-trap method, especially for benzene (whose concentration was underestimated by as much as 1000-fold by the EPA method). However, soil/water desorption showed little benzene mobility, and Kd values for benzene were 1-2 orders of magnitude higher than those calculated based on literature sorption K(OC) values. These results indicate that environmentally relevant concentrations of benzene may be better represented by mild extraction methods than by methods capable of extracting tightly bound benzene.

Benzene↗