Diffusion model for fluidized-bed drying.

M A Zoglio; W H Streng; J T Carstensen

doi:10.1002/jps.2600641127

Home/Archive/PubMed

PubMed · 1195120

Diffusion model for fluidized-bed drying.

M A Zoglio·W H Streng·J T Carstensen

View original source ↗Export metadata ↓

Abstract

A sucrose-lactose-starch granulation was used to study particulate motion and attrition in a fluid bed dryer. There is some classification of material in the dryer as drying proceeds; fine particles are dried faster and become less dense, and the less dry but denser large particles show some (although not great) accumulation tendencies in the lower central area. Unlike countercurrent rotary drying, fluid bed drying cannot be accounted for by water diffusion inside the granule as the rate-limiting step. In its place, a model of external water vapor diffusion is proposed and is supported by vapor-concentration curves and by the linear dependence of the rate constants on the linear air velocities. The dried granulation exhibits the same trend as does countercurrent dried material in that larger particles have higher moisture contents than do smaller particles. Quantitative relationships between content of moisture and size were developed and are supported by experimental data. The granulation, upon storage, does not equilibrate, indicating that this type of water distribution is a problem in batch process granulations as well as in the earlier reported case of granulations for continuous production.

Explore related subjects

Diffusion Drug Compounding Humidity Models, Chemical Particle Size Powders Technology, Pharmaceutical Temperature Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

M A Zoglio, W H Streng, J T Carstensen. 1975. Diffusion model for fluidized-bed drying.. https://doi.org/10.1002/jps.2600641127

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed1992

Lateral diffusion and percolation in two-phase, two-component lipid bilayers. Topology of the solid-phase domains in-plane and across the lipid bilayer.

Fluorescence recovery after photobleaching (FRAP) has recently been used to examine the percolation properties of coexisting phases in two-component, two-phase phosphatidylcholine bilayers [Vaz, W. L. C., Melo, E. C. C., & Thompson, T. E. (1989) Biophys. J. 56, 869-876]. We now report the use of FRAP to study two additional problems in similar systems. The first is the effect of solid-phase obstacles on the lateral diffusion in the fluid phase. The second is the question of whether or not, in a single bilayer, solid-phase domains in one monolayer are exactly superimposed on solid domains in the apposing monolayer. To address the first problem, the lateral diffusion of N-(7-nitrobenzoxa-2,3-diazol-4-yl)-1-palmitoyl-2-oleoylphosp hatidylethanolamine (NBD-POPE), a probe soluble only in the fluid phase when solid and fluid phases coexist, has been studied in the mixture N-lignoceroyldihydrogalactosylceramide (LigGalCer)/dipalmitoylphosphatidylcholine (DPPC). Percolation of the fluid phase occurs at a high mass fraction of solid phase. This indicates that the solid domains have a centrosymmetric shape, a characteristic which makes this a good experimental system to test theoretical simulations of diffusion in an archipelago. It is shown that agreement between theory and experiment is poor, a result that had already been observed when the obstacles were integral membrane proteins. We develop an effective-medium model for diffusion in two-phase systems which explains both our results and those obtained with integral proteins. The distinctive feature of the model is the consideration of an annular region around the obstacles where the lipids are more ordered than in the bulk fluid phase. The diffusion coefficient is then calculated by extending the free area model to two-phase systems, taking these annuli into account. The second question, the organization of the solid-phase domains across the lipid bilayer, is examined in the systems LigGalCer/DPPC and dimyristoylphosphatidylcholine (DMPC)/distearoylphosphatidylcholine (DSPC) by comparing the diffusion of a fluid-phase-soluble, gel-phase-insoluble lipid derivative which spans the two monolayers of a bilayer (NBD-membrane-spanning-phosphatidylethanolamine, NBD-msPE) with that of a probe which is restricted to a single monolayer. In LigGalCer/DPPC, 20:80, the distribution of solid domains in one of the monolayers is independent of the distribution in the apposing monolayer. In contrast, in DMPC/DSPC, 50:50, the solid domains in one monolayer are exactly superimposed upon the solid domains existing in the apposing monolayer.

Diffusion↗

PubMed1992

L-alpha-glycerophosphate and L-lactate electrodes based on the electrochemical "wiring" of oxidases.

The title electrodes were constructed by coimmobilizing the respective FAD oxidases on solid electrode surfaces with a poly(vinyl pyridine) polymer which was N-derivatized with bromoethylamine and Os(bpy)2Cl2. The redox-polymer-enzyme hydrogels were cross-linked on the electrode surface using poly(ethylene glycol) diglycidyl ether. As in the case of glucose oxidase, the redox polymer acts as an electron relaying "wire" transferring electrons directly from the enzymes' FADH2 centers to the electrode. This transfer competes with the natural process of reoxidation of FADH2 by molecular oxygen. The variation of the response of these electrodes with the atmosphere (N2 or air), pH, and substrate concentration was determined. The pH profile of the electrocatalytic current differs from that of the activity of the free enzymes, exhibiting a broader maximum, shifted to higher pH values. The observed sensitivities and linear ranges are respectively 2 x 10(-2) A M-1 cm-2 and 2.7 mM for L-alpha-glycerophosphate, and 0.3 A M-1 cm-2 and 0.2 mM for L-lactate that may be compared to 2 x 10(-2) A M-1 cm-2 and 10 mM for glucose. The 0-90% response time for all electrodes is 1 s or less.

Diffusion↗

PubMed1992

Quantitation of lateral stress in lipid layer containing nonbilayer phase preferring lipids by frequency-domain fluorescence spectroscopy.

Frequency-resolved fluorescence measurements have been performed to quantitate the lateral stress of the lipid layer containing nonbilayer phase preferring dioleoylphosphatidylethanolamine (DOPE). On the basis of a new rotational diffusion model, the wobbling diffusion constant (Dw), the curvature-related hopping diffusion constant (DH), and the two local orientational order parameters ([P2] and [P4]) of 1-palmitoyl-2-[[2-[4-(6-phenyl-trans-1,3,5-hexatrienyl)phenyl]ethyl] carbonyl]-3-sn-phosphatidylcholine (DPH-PC) in fully hydrated DOPE and DOPE/dioleoylphosphatidylcholine (DOPC) mixtures were calculated from the frequency-domain anisotropy data. The values of [P2], [P4], and DH for DOPE were found to increase significantly at approximately 12 degrees C, the known lamellar liquid crystalline (L alpha) to inverted hexagonal (HII) phase transition temperature of DOPE. Similar features as well as a decline of Dw were detected in the DOPE/DOPC mixtures as the DOPE content was increased from 85% to 90% at 23 degrees C, corresponding to the known lyotropic phase transition of the DOPE/DOPC. In contrast, for DOPC (0-40 degrees C) and DOPE/DOPC (0-100% DOPE at 3 degrees C), which remained in the L alpha phase, these changes were not detected. The most probable local orientation of DPH-PC in the DOPE/DOPC mixtures shifted progressively toward the normal of the lipid/water interface as the content of DOPE increased. We concluded that the curvature-related lateral stress in the lipid layer increases with the content of the nonbilayer phase preferring lipids.

Diffusion↗