Search PubMed⌕ Search

PubMed · 10994035

Flutamide-hydroxypropy-beta-chiyclodextrin complex: formulation, physical characterization, and absorption studies using the Caco-2 in vitro model.

Abstract

PURPOSE: The objective of this research was to formulate flutamide (FLT) in hydroxypropyl-beta-cyclodextrin (HPbetaCyD), and to investigate FLT transcellular permeation from the complex using the Caco-2 monolayer in vitro model. METHODS: Classical solubility data were used to derive thermodynamic parameters which, together with Differential Scanning Calorimetry (DSC), (1)H-NMR and (19)F-NMR, were used to characterize and derive stability constants for the FLT-HPbetaCyD complex. The Caco-2 cell line was used to examine the role of HPbetaCyD on the passage of FLT across cell monolayers in vitro. RESULTS: The solubility of FLT in water (1.46 mmol/L) increased almost 170 times (to 243.45 mmol/L) in the presence of 50% (w/v) HPbetaCyD. Solubility data for FLT in aqueous HPbetaCyD were used to derive thermodynamic parameters (DeltaG degrees at 298 K = -3.48, DeltaH degrees = 2.85, DeltaS degrees at 298 K = 21.24). The solubility of FLT in HPbetaCyD increased proportionally with an increase in temperature. The FLT-HPbetaCyD complex had an A(L)-type (DSC) isotherm, consistent with a linear increase in FLT solubility and unchanged stoichiometry. The DSC of free FLT and HPbetaCyD showed endothermic peaks at 110 degrees C and 300 degrees C, respectively. FLT-HPbetaCyD did not display a free-FLT endothermic response, but exhibited broadening of the endothermic peak in the HPbetaCyD region. (19)F- and (1)H-NMR chemical shifts of FLT moved upfield as a function of its increased solubility in the presence of HPbetaCyD. The FLT-HPbetaCyD stability constant, K(s) (1:1) was estimated to be 356 M(-1 )and 357 M(-1), from thermodynamic and (19)F NMR data, respectively. The apical-to-basal permeability coefficient (P(eff) = 4.75 x 10(-5) cm.s(-1)) for FLT across Caco-2 cell monolayers at 37; C increased as HPbetaCyD concentrations were reduced, indicative of transepithelial passage via passive diffusion of available free FLT in solution. Studies in the presence and absence of Ca(2+ )ruled out a significant paracellular transport component. CONCLUSIONS: FLT-HPbetaCyD is a relatively stable, 1:1 inclusion complex. Formation of this complex substantially increases the water solubility of FLT, but HPbetaCyD, except in high dilution, reduces transcellular passage of FLT in the Caco-2 cell in vitro model.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Z Zuo, G Kwon, B Stevenson, J Diakur, L I Wiebe. Flutamide-hydroxypropy-beta-chiyclodextrin complex: formulation, physical characterization, and absorption studies using the Caco-2 in vitro model.. https://pubmed.ncbi.nlm.nih.gov/10994035/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Preparation and evaluation of a Carbopol/HPMC-based in situ gelling ophthalmic system for puerarin.

The purpose of this study was to develop a pH-triggered in situ gelling vehicle for ophthalmic delivery of puerarin. The effect of hydroxypropyl-beta-cyclodextrin (HP-beta-CD) on the aqueous solubility and in vitro corneal permeation of puerarin was also investigated. The puerarin solubility increased linearly and proportionally to the HP-beta-CD concentrations and 5% (w/v) HP-beta-CD enhanced its ocular permeability significantly. Carbopol 980NF was used as the gelling agent in combination with HPMC (Methocel E4M) which acted as a viscosity-enhancing agent. The optimum concentrations of Carbopol 980NF and HPMC E4M for the in situ gel-forming delivery systems were 0.1% (w/v) and 0.4% (w/v), respectively. When these two vehicles were combined, an in situ gel that had the appropriate gel strength and gelling capacity under physiological condition could be obtained. This combined solution could flow freely under non- physiological condition and showed the character of pseudoplastic fluid under both conditions. Both in vitro release studies and in vivo pharmacokinetics studies indicated that the combined polymer systems performed better in retaining puerarin than puerarin eye drops did. These results demonstrate that the Carbopol 980NF/HPMC E4M can be a viable alternative to conventional puerarin eye drops to enhance ocular bioavailability and patient compliance.

2-Hydroxypropyl-beta-cyclodextrin↗

New cyclodextrin hydrogels cross-linked with diglycidylethers with a high drug loading and controlled release ability.

PURPOSE: The goal of the study is to develop new hydrogels based on cyclodextrins cross-linked with ethyleneglycol diglycidylether (EGDE) under mild conditions, to be used as carriers of amphiphilic drugs. Also, it aims to characterize the cross-linking and the drug loading and release processes. METHODS: The cross-linking of hydroxypropyl-beta-cyclodextrin (HPbetaCD) with EGDE, in the absence or presence of hydroxypropylmethylcellulose (HPMC) Methocel K4M, was optimized applying oscillatory rheometry and Fourier transform infrared. Hydrogels were characterized regarding swelling in water, ability to load diclofenac, and release after different drying treatments. RESULTS: Solutions of HPbetaCD (14.28%), without or with HPMC (0.2-1.0%), provided firm and transparent hydrogels after cross-linking with EGDE (14.28%), in which around two thirds of the OH groups were cross-linked. The incorporation of HPMC progressively reduced the gel time and the swelling degree of hydrogels. HPbetaCD hydrogels efficiently loaded diclofenac and sustained the release for several hours. The presence of HPMC slowed the release from swollen hydrogels, but promoted it from hydrogels dried before the loading and also before the release. CONCLUSIONS: HPbetaCD hydrogels with good mechanical properties and tunable loading and release ability can be obtained by direct cross-linking with EGDE.

2-Hydroxypropyl-beta-cyclodextrin↗

Stabilization of phenylalanine ammonia lyase against organic solvent mediated deactivation.

A potential novel therapy for phenylketonuria involves oral administration of microencapsulated phenylalanine ammonia lyase (PAL), an enzyme that converts phenylalanine to transcinnamic acid. A drawback of this potential therapy is that encapsulated PAL retains only 23% of its activity. Microcapsules are prepared by emulsifying PAL in 10% hemoglobin solution with water-saturated ether (WSE) and subsequent addition of cellulose nitrate dissolved in ether:ethanol (E:E) mixture. The objective of this paper was to determine the contribution of emulsification to the overall loss in activity of encapsulated PAL, and to devise strategies to protect PAL against such loss in activity. Emulsification was simulated by stirring the aqueous phase containing PAL with the organic phase. The mixture was then centrifuged, and the protein content and catalytic activity of PAL in the aqueous phase was measured. Emulsification of PAL solution with WSE caused no loss in activity but resulted in a loss in protein content of aqueous phase. Size exclusion chromatography and gel electrophoresis studies showed that the loss was primarily due to the specific loss of impurities in the PAL sample. Emulsification of PAL solution with E:E resulted in a 50% decrease in its activity. Among the additives, hydroxypropyl-gamma-cyclodextrin and hydroxy propyl-beta-cyclodextrin protected PAL against emulsion mediated loss in activity.

2-Hydroxypropyl-beta-cyclodextrin↗