PubMed · 10934743
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
A Menon, N Nerella. 2000. Communicating tabular data using ORACLE.. https://doi.org/10.1081/pdt-100100559
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Cellulosic textiles, constituting over 30% of global fibre production, are biodegradable but remain challenging to recycle at scale owing to their high crystallinity, chemical finishes, and heterogeneous waste streams. Although microorganisms drive cellulose turnover in natural ecosystems, their potential for transforming anthropogenic cellulosic waste remains largely unexplored. In this study, composting was evaluated both as a sustainable approach to textile biodegradation and a reservoir of cellulolytic microorganisms with biotechnological potential. Biodegradation assays of cotton and lyocell were integrated with shotgun metagenomics and targeted cultivation to identify microbial taxa and enzymes involved in cellulose degradation. Composting trials showed that degradation was strongly influenced by both composting system and fibre composition. Community composting achieved near-complete textile disintegration, while shredded textiles exhibited the highest degradation rates, reaching up to 97%. Shotgun metagenomic revealed a bacterial-dominated community enriched in Actinomycetota and Bacillota and characterised by an abundance of glycoside hydrolases. Culture-based screening recovered 62 microbial isolates, of which Neurospora and Aspergillus exhibited the highest cellulolytic activity (>60%). In vitro assays further showed that cotton was more readily degraded than lyocell, with several isolates achieving >70% mass loss. Metagenomic approach revealed a predominantly bacterial composting community at the sampled stage, whereas cultivation preferentially recovered fungi that, despite their low relative abundance in situ, exhibited strong cellulolytic potential. These findings highlight the potential of composting as a sustainable end-of-life strategy for cellulosic textiles and identify compost microbiomes as valuable reservoirs of cellulolytic microorganisms for the development of sustainable bioprocesses for textile waste treatment.
The purpose of this study was to investigate the use of 6-carboxycellulose (OC), a biocompatible and bioresorbable polymer, as a prodrug carrier for amine drugs. Phenylpropanolamine hydrochloride (PPA.HCl) was used as a model drug. OC and PPA were reacted in dimethylformamide (DMF) in the presence of 1,3-dicyclohexylcarbodiimide (DCC) for 2.5 days at room temperature. Filtration, followed by washing with methanol, and subsequent drying under vacuum, produced the conjugate in 65-78% yield. The amount of PPA in the product, determined from the difference in the carboxylic content before and after the reaction, was 24.2% (w/w), corresponding to a degree of substitution (DS) value of 0.7. The Fourier transform-infra red (FT-IR) spectrum of the conjugate, compared with that of OC and PPA.HCl, showed a new band at about 1533 cm(-1) attributable to a C = O (amide II) stretching and N single bond H (amide I and amide II) bending vibrations, a decrease in intensity of the characteristic free carboxylic acid carbonyl stretching band at about 1748 cm(-1), and a strong band at 1663 cm(-1) due to C = O (amide I) stretching vibration, suggesting that the OC is linked to PPA via an amide bond. The solid-state carbon-13 cross polarization/magic angle spinning nuclear magnetic resonance ((13)CCP/MAS NMR) spectrum of the conjugate was also consistent with this structure. The release studies performed in pH 4.5, 5.5, and 7.4 buffer solutions and in rat liver homogenate (pH 7.4), showed the conjugate to be more susceptible to hydrolysis at a lower pH and in the presence of rat liver homogenate. In conclusion, the results presented show that OC can be covalently linked to amine drugs via an amide bond in DMF using DCC as a coupling agent, and provide a macromolecular prodrug delivery system.
The purpose of this study was to investigate whether the deformation and densification during compression of one type of granules are affected by adjacent granules of a different porosity, corresponding to different mechanical strength. Three mixtures were prepared, each consisting of two types of microcrystalline cellulose pellets (intermediate porosity study pellets plus low, intermediate or high porosity surrounding pellets) in the proportion 1:7. The mixtures were compressed and the study pellets were retrieved and analysed in terms of porosity, thickness, surface area and shape. It was shown that the study pellets were compressed by deformation and densification. The degree of densification (decrease in porosity) of the study pellets was independent of the porosity of the surrounding pellets but the deformability (changes in the thickness, surface area and shape) of the study pellets was linked with the porosity of the surrounding pellets. It is concluded that the mode of deformation of the study pellets was regulated by the porosity of the surrounding granules; in a mixture containing granules with a low porosity, compression resulted in irregular study granules with regularly positioned indentations caused by the surrounding granules. The compression properties of the surrounding granules affected the flattening of the study granules to a lesser degree.