PubMed · 10754691
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
T H Meltzer, R E Madsen, M W Jornitz. Considerations for diffusive airflow integrity testing.. https://pubmed.ncbi.nlm.nih.gov/10754691/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Maximization of the contact between males and females is a key factor in the production of the nematode Steinernema carpocapsae in a bioreactor.%The influence of the airflow rate in male and female distribution and mass production in an external-loop bioreactor with a deceleration zone was studied. When operating at an airflow rate of 0.05 vvm, a high retention of females in the deceleration zone of the bioreactor was observed and a larger nematode productivity was obtained. At this aeration rate there was a higher proportion of males in that zone, which together with the lower circulation rate, increases the probability of encounters, thereby explaining the increase in productivity.
An analytical model for heavy gas dispersion based on the modifications in plume path theory has been developed. The model takes into account the variations in temperature, density, and specific heat during the movement of heavy gas plume. The model has been tested for three hazardous gases - chlorine, natural gas and liquefied petroleum gas. The results have been compared with the recently generated experimental data as also with the outputs of other models. A good agreement is observed qualitatively as well as quantitatively. A study has also been carried out to simulate the effect of the wind speed, density of the gas, and venting speed on dispersion. Based on the simulation study a set of empirical equations has been developed. The equations are validated by theoretical as well as experimental studies.
Results are reported from a programme of work undertaken by the UK Health and Safety Executive to investigate the airblast produced by commercial sector explosives having velocities of detonation (VoD) in the range 2000-8200 m s(-1). The data produced will be useful in evaluating the blast hazards of such explosives in industrial circumstances and also as a means of assessing post-accident damage. All of the solid explosive materials studied produced blast waves which ramped up into shock-wave form close to the point of initiation. The dependence of peak overpressure and positive phase impulse on scaled distance is presented and compared to that of TNT. The TNT equivalence (TNT(e)) technique is shown to be applicable to solid phase explosives with a wide range of VoD, although the precise values of TNT(e) vary with distance.