Search PubMed⌕ Search

PubMed · 10543115

[Bismuth].

Abstract

The source did not provide an abstract. Follow the original record for more information.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T Sakai. 1999. [Bismuth].. https://pubmed.ncbi.nlm.nih.gov/10543115/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Radioactive contamination of wood and its products.

This paper presents research on radioactive contamination of the three most common kinds of wood in Croatia--beech, oak and fir as well as acorn. Gamma-spectrometric measurements carried out on the samples of bark and wood of beech, oak, fir and acorn have shown radioactivity contents ranging from 1.6 +/- 0.1 to 37.3 +/- 0.5 Bq/kg from deposited 137Cs, whose concentrations in the soil of Croatia have increased after the Chernobyl accident. Measurements have also shown the radioactivity originating from 40K and 214Bi, which are part of the natural composition of the soil. The distribution of the radionuclides in wood has been discussed, as well as the impact of radioactive contamination of wood by the artificial radionuclide 137Cs upon the forest ecosystem. According to the corresponding model, it has been calculated that a 10 h daily stay in a typical family house increases the annual radiation dose of the population, due to the deposited 137Cs in the structure or furniture, by 343 microSv.

Bismuth↗

Flow injection manifold for the direct spectrophotometric determination of bismuth in pharmaceutical products using Methylthymol Blue as a chromogenic reagent.

A new simple and rapid flow injection method is reported for the direct determination of bismuth in pharmaceutical products. Methylthymol Blue (MTB) was used as a chromogenic reagent and the absorbance of the colored Bi(III)-MTB complex produced was monitored at 548 nm. The various chemical and physical variables were optimized and a study of interfering ions was also carried out. Linear calibration graphs were obtained from 0 to 100 mg l-1 Bi(m) (120 injections per hour). The precision was very good (sr = 1.3%) and the limit of detection was cL = 0.150 mg l-1. The average accuracy was also very good (er = 0.75%) and was evaluated by comparison of the results obtained with those claimed by the manufacturers. The method was found to be adequately selective, considering the ions that the samples contain.

Bismuth↗

A primary observation on the preparation and obturation of oval canals.

AIM: The aim of this study was to observe the existence and assess the quality of obturation of uninstrumented recesses in oval canals. METHODOLOGY: The balanced force technique was used in two groups of oval canals in human mandibular incisors. The canals in group 1 were enlarged to conventional sizes, whereas canals in group 2 were enlarged more widely. All canals were obturated with cold laterally condensed gutta-percha. Two horizontal sections were cut in the apical portion of each filled root. Images of the cross-sections were scanned and analysed using the KS100 Imaging system. RESULTS: Uninstrumented recesses appeared in 13 (65%) oval canals. The recesses in five of these 13 canals were obturated without visible voids. The recesses in the other eight canals were either obturated with visible voids or completely unfilled. The percentage of filled area was significantly higher in group 1 than in group 2 (P < 0.05). CONCLUSIONS: Uninstrumented recesses may be left in many oval canals after preparation using the balanced force technique and these recesses may often not be completely obturated with cold laterally condensed gutta-percha.

Bismuth↗