I.V. admixture profiling: a simple system.

B Grabowski; D J Tanner

Home/Archive/PubMed

PubMed · 10242202

I.V. admixture profiling: a simple system.

B Grabowski·D J Tanner

View original source ↗Export metadata ↓

Abstract

The description of an I.V. admixture profile form is presented. Detailed information on the mechanisms of using this form, as well as the advantages of the profiling system, are delineated. Several examples are illustrated for thorough understanding of the system. The authors conclude that the system affords a simple, accurate, and flexible profiling system which can be utilized in hospital I.V. admixture programs of various sizes. The profiling system provides for a mechanism of clinical involvement as well as for quality assurance assessment.

Explore related subjects

Drug Compounding Hospital Bed Capacity, 100 to 299 Hospital Records Infusions, Parenteral Kentucky Medical Records Medication Systems, Hospital Records Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

B Grabowski, D J Tanner. 1979. I.V. admixture profiling: a simple system.. https://pubmed.ncbi.nlm.nih.gov/10242202/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

A correction factor for bridging compaction simulator and different roller compactors.

Roller compaction (RC) is an important dry granulation technique. Since pilot and commercial scale roller compactors, which operate continuously on a large scale, usually require kilograms of material per run, formulation and process development directly on such roller compactors is not practical. In contrast, a compaction simulator (CS) can produce ribblets, also known as "slugs", using only a few grams of material with sinusoidal displacement profile replicating the motion of a specific point on the roll surface. Thus, it is possible to develop RC formulation and process in laboratory using a CS-based material-sparing approach. However, because of the inherently different configurations for applying pressure between die compression and roll compression, translating uniaxial pressure from CS experiments to roll pressure during RC is often unreliable, leading to significant uncertainties in the critical quality attributes of ribbons, such as ribbon solid fraction (or porosity) and mechanical strength. The objective of this study was to identify a correction factor (Kp = uniaxial die compression pressure/roll pressure), by correlating the compressibility profiles from CS and a roller compactor of interest, to enable more reliable process translation from CS to roller compactor. In this study, a Kp value of 0.5 was determined for Alexanderwerk WP120 and validated for Gerteis Mini-Pactor and Bepex Pharmapactor. This value may serve as a starting point for translating the optimal compaction pressure identified based on CS investigation to common roller compactors, requiring only minor adjustments to attain optimal RC process parameters (i.e., roll force and roll gap) for a chosen roller compactor.

Drug Compounding↗

PubMed2001

Evaluation of model solvent systems for assessing the accumulation of container extractables in drug formulations.

The interaction between a medical device and a pharmaceutical solution it contacts may dictate solution safety and/or efficacy. Of specific concern is the ability of device components to leach into the contacting solution. As pharmaceutical solutions containing surfactants, co-solvents and solubilizing agents become more common, method's for assessing the extent of leaching are needed. In this manuscript, a model is developed which relates a solution's polarity to its ability to interact with a plastic material. The validity of the developed model is examined via direct analysis of several pharmaceutically relevant solutions.

Drug Compounding↗

PubMed2001

A simple method for evaluating the mixing efficiency of a new type of pan coater.

The objective of this study was to investigate some important process parameters on the mixing behavior of a new coater type. The coater used in this study, the Bohle BLC pan coater, differs from other coaters in its high length to diameter ratio. The pan coater can be divided into two zones: drying and spraying zone. The temperature difference between two points in the pan (one in each zone) was used to explore the influence of some process parameters, i.e. the pan speed and the inclination of the rotation axis on the mixing behavior. In addition, the effect of the spray rate on the temperature difference was studied. The results of the current study demonstrated the possibility to characterize the mixing behavior in a pan coater by a simple temperature measurement. The temperature difference method resulted in a model, which was comparable to the model from a conventional mixture experiment. It was shown that the pan speed and the spray rate influenced the temperature difference and, consequently, the mixing efficiency. However, the inclination of the rotation axis did not show an important effect.

Drug Compounding↗