Search PubMed⌕ Search

Biomedical subjects

Z Dauter

Publications and source records attributed to Z Dauter.

At least 55 records · Page 3Linked to original sources

Contribution of a conserved asparagine to the conformational stability of ribonucleases Sa, Ba, and T1.

The contribution of hydrogen bonding by peptide groups to the conformational stability of globular proteins was studied. One of the conserved residues in the microbial ribonuclease (RNase) family is an asparagine at position 39 in RNase Sa, 44 in RNase T1, and 58 in RNase Ba (barnase). The amide group of this asparagine is buried and forms two similar intramolecular hydrogen bonds with a neighboring peptide group to anchor a loop on the surface of all three proteins. Thus, it is a good model for the hydrogen bonding of peptide groups. When the conserved asparagine is replaced with alanine, the decrease in the stability of the mutant proteins is 2.2 (Sa), 1.8 (T1), and 2.7 (Ba) kcal/mol. When the conserved asparagine is replaced by aspartate, the stability of the mutant proteins decreases by 1.5 and 1.8 kcal/mol for RNases Sa and T1, respectively, but increases by 0.5 kcal/mol for RNase Ba. When the conserved asparagine was replaced by serine, the stability of the mutant proteins was decreased by 2.3 and 1.7 kcal/mol for RNases Sa and T1, respectively. The structure of the Asn 39 --> Ser mutant of RNase Sa was determined at 1.7 A resolution. There is a significant conformational change near the site of the mutation: (1) the side chain of Ser 39 is oriented differently than that of Asn 39 and forms hydrogen bonds with two conserved water molecules; (2) the peptide bond of Ser 42 changes conformation in the mutant so that the side chain forms three new intramolecular hydrogen bonds with the backbone to replace three hydrogen bonds to water molecules present in the wild-type structure; and (3) the loss of the anchoring hydrogen bonds makes the surface loop more flexible in the mutant than it is in wild-type RNase Sa. The results show that burial and hydrogen bonding of the conserved asparagine make a large contribution to microbial RNase stability and emphasize the importance of structural information in interpreting stability studies of mutant proteins.

Asparagine↗

Structural parameters for proteins derived from the atomic resolution (1.09 A) structure of a designed variant of the ColE1 ROP protein.

The crystal structure of a designed variant of the ColE1 repressor of primer (ROP) protein has been refined with SHELXL93 to a resolution of 1.09 A. The final model with 510 non-H protein atoms, 576 H atoms in calculated positions and 114 water molecules converged to a standard R factor of 10% using unrestrained blocked full-matrix refinement. For all non-H atoms six-parameter anisotropic thermal parameters have been refined. The majority of atomic vibrations have a preferred orientation which is approximately perpendicular to the bundle axis; analysis with the TLS method [Schomaker & Trueblood (1968). Acta Cryst. B24, 63-77] showed a relatively good agreement between the individual atomic displacements and a rigid-body motion of the protein. Disordered residues with multiple conformations form clusters on the surface of the protein; six C-terminal residues have been omitted from the refined model due to disorder. Part of the solvent structure forms pentagonal or hexagonal clusters which bridge neighbouring protein molecules. Some water molecules are also conserved in wild-type ROP. The unrestrained blocked full-matrix least-squares refinement yielded reliable estimates of the standard deviations of the refined parameters. Comparison of these parameters with the stereochemical restraints used in various protein refinement programs showed statistically significant differences. These restraints should be adapted to the refinement of macromolecules by taking into account parameters determined from atomic resolution protein structures.

Anisotropy↗

The refined structure of dUTPase from Escherichia coli.

Deoxyuridine 5'-triphosphate nucleotidohydrolase (dUTPase, E.C. 3.6. 1.23) catalyzes the hydrolysis of dUTP to dUMP and pyrophosphate and is involved in nucleotide metabolism and DNA synthesis. A crystal of the recombinant E. coli enzyme, precipitated from polyethylene glycol mixtures in the presence of succinate at pH 4.2, was used to collect synchrotron diffraction data to 1.9 A resolution, in space group R3, a = b = 86.62, c = 62.23 A. Mercury and platinum derivative data were collected at wavelengths to optimize the anomalous contribution. The resulting 2.2 A MIRAS phases differed from the final set by 40 degrees on average and produced an excellent map which was easy to interpret. The model contains 132 water molecules and refined to an R value of 13.7%. 136 residues have clear electron density out of 152 expected from the gene sequence. The 16 C-terminal residues are presumably disordered in the crystal lattice. The monomer is a 'jelly-roll' type, containing mostly beta-sheet and only one short helix. The molecule is a tight trimer. A long C-terminal arm extends from one subunit and encompasses the next one within the trimer contributing to its beta-sheet. Conserved sequence motifs common among dUTPases, previously suggested to compose the active site and confirmed in a recent study of the dUDP complex, are located at subunit-subunit interfaces along the threefold axis, in parts of the beta-sheet and in loop regions. A similar molecular architecture has recently been found in two other trimeric dUTPases.

Amino Acid Sequence↗

Crystallization and preliminary X-ray crystallographic studies of the plant aspartic proteinase cardosin A.

The plant aspartic proteinase cardosin A was crystallized using vapour diffusion. Crystals belong to the monoclinic space group C2, cell dimensions a = 116.9 (2), b = 87.2 (8), c = 81.3 (1) A, beta = 104.4 (4) degrees, and contain two molecules in the asymmetric unit related by a non-crystallographic twofold axis. Diffraction data were collected at room temperature with radiation from a synchrotron source up to 2.85 A resolution. When the crystals were flash cooled to 110 K in a nitrogen stream the same resolution limit could also be obtained on a rotating-anode source. Recently, synchrotron radiation together with flash cooling led to an improvement of the diffraction data to 1.72 A resolution.

Aspartic Acid Endopeptidases↗

Structure of glucoamylase from Saccharomycopsis fibuligera at 1.7 A resolution.

The yeast Saccharomycopsis fibuligera produces a glucoamylase which belongs to sequence family 15 of glycosyl hydrolases. The structure of the non-glycosyl-ated recombinant enzyme has been determined by molecular replacement and refined against 1.7 A resolution synchrotron data to an R factor of 14.6%. This is the first report of the three-dimensional structure of a yeast family 15 glucoamylase. The refinement from the initial molecular-replacement model was not straightforward. It involved the use of an unrestrained automated refinement procedure (uARP) in combination with the maximum-likelihood refinement program REFMAC. The enzyme consists of 492 amino-acid residues and has 14 alpha-helices, 12 of which form an (alpha/alpha)6 barrel. It contains a single catalytic domain but no starch-binding domain. The fold of the molecule and the active site are compared to the known structure of the catalytic domain of a fungal family 15 glucoamylase and are shown to be closely similar. The active- and specificity-site residues are especially highly conserved. The model of the acarbose inhibitor from the analysis of the fungal enzyme fits tightly into the present structure. The active-site topology is a pocket and hydrolysis proceeds with inversion of the configuration at the anomeric carbon. The enzyme acts as an exo-glycosyl hydrolase. There is a Tris [2-amino-2-(hydroxymethyl)-1,3-propanediol] molecule acting as an inhibitor in the active-site pocket.

Amino Acid Sequence↗

Recognition of RNase Sa by the inhibitor barstar: structure of the complex at 1.7 A resolution.

We report the 1.7 A resolution structure of RNase Sa complexed with the polypeptide inhibitor barstar. The crystals are in the hexagonal space group P65 with unit-cell dimensions a = b = 56.9, c = 135.8 A and the asymmetric unit contains one molecule of the complex. RNase Sa is an extracellular microbial ribonuclease produced by Streptomyces aureofaciens. Barstar is the natural inhibitor of barnase, the ribonuclease of Bacillus amyloliquefaciens. It inhibits RNase Sa and barnase in a similar manner by steric blocking of the active site. The structure of RNase Sa is very similar to that observed in crystals of the native enzyme and its complexes with nucleotides. Barstar retains the structure found in its complex with barnase. The accessible surface area of protein buried in the complex is about 300 A2 smaller and there are fewer hydrogen bonds in the enzyme-inhibitor interface in RNase Sa-barstar than in barnase-barstar, providing an explanation of the reduced binding affinity in the former. Previous studies of barstar complexes have used mutants of the inhibitor and this is the first structure which includes wild-type barstar.

Amino Acid Sequence↗

Refinement of triclinic hen egg-white lysozyme at atomic resolution.

X-ray diffraction data have been collected at both low (120 K) and room temperature from triclinic crystals of hen egg-white lysozyme to 0.925 and 0.950 A resolution, respectively, using synchrotron radiation. Data from one crystal were sufficient for the low-temperature study, whereas three crystals were required at room temperature. Refinement was carried out using the programs PROLSQ, ARP and SHELXL to give final conventional R factors of 8.98 and 10.48% for data with F > 4sigma(F) for the low- and room-temperature structures, respectively. The estimated r.m.s. coordinate error is 0.032 A for protein atoms, 0.050 A for all atoms in the low-temperature study, and 0.038 A for protein atoms and 0.049 A for all atoms in the room-temperature case, as estimated from inversion of the blocked least-squares matrix. The low-temperature study revealed that the side chains of 24 amino acids had multiple conformations. A total of 250 waters, six nitrate ions and three acetate ions, two of which were modelled with alternate orientations were located in the electron-density maps. Three sections of the main chain were modelled in alternate conformations. The room-temperature study produced a model with multiple conformations for eight side chains and a total of 139 water molecules, six nitrate but no acetate ions. The occupancies of the water molecules were refined in both structures and this step was shown to be meaningful when assessed by use of the free R factor. A detailed description and comparison of the structures is made with reference to the previously reported structure refined at 2.0 A resolution.

Animals↗

Conformational stability and thermodynamics of folding of ribonucleases Sa, Sa2 and Sa3.

Ribonucleases Sa, Sa2, and Sa3 are three small, extracellular enzymes produced by different strains of Streptomyces aureofaciens with amino acid sequences that are 50% identical. We have studied the unfolding of these enzymes by heat and urea to determine the conformational stability and its dependence on temperature, pH, NaCl, and the disulfide bond. All three of the Sa ribonucleases unfold reversibly by a two-state mechanism with melting temperatures, Tm, at pH 7 of 48.4 degrees C (Sa), 41.1 degrees C (Sa2), and 47.2 degrees C (Sa3). The Tm values are increased in the presence of 0.5 M NaCl by 4.0 deg. C (Sa), 0.1 deg. C (Sa2), and 7.2 deg. C (Sa3). The Tm values are decreased by 20.0 deg. C (Sa), 31.5 deg. C (Sa2), and 27.0 deg. C (Sa3) when the single disulfide bond in the molecules is reduced. We compare these results with similar studies on two other members of the microbial ribonuclease family, RNase T1 and RNase Ba (barnase), and with a member of the mammalian ribonuclease family, RNase A. At pH 7 and 25 degrees C, the conformational stabilities of the ribonucleases are (kcal/mol): 2.9 (Sa2), 5.6 (Sa3), 6.1 (Sa), 6.6 (T1), 8.7 (Ba), and 9.2 (A). Our analysis of the stabilizing forces suggests that the hydrophobic effect contributes from 90 to 110 kcal/mol and that hydrogen bonding contributes from 70 to 105 kcal/mol to the stability of these ribonucleases. Thus, we think that the hydrophobic effect and hydrogen bonding make large but comparable contributions to the conformational stability of these proteins.

Amino Acid Sequence↗

Crystal structure of tryptophanase.

The X-ray structure of tryptophanase (Tnase) reveals the interactions responsible for binding of the pyridoxal 5'-phosphate (PLP) and atomic details of the K+ binding site essential for catalysis. The structure of holo Tnase from Proteus vulgaris (space group P2(1)2(1)2(1) with a = 115.0 A, b = 118.2 A, c = 153.7 A) has been determined at 2.1 A resolution by molecular replacement using tyrosine phenol-lyase (TPL) coordinates. The final model of Tnase, refined to an R-factor of 18.7%, (Rfree = 22.8%) suggests that the PLP-enzyme from observed in the structure is a ketoenamine. PLP is bound in a cleft formed by both the small and large domains of one subunit and the large domain of the adjacent subunit in the so-called "catalytic" dimer. The K+ cations are located on the interface of the subunits in the dimer. The structure of the catalytic dimer and mode of PLP binding in Tnase resemble those found in aspartate amino-transferase, TPL, omega-amino acid pyruvate aminotransferase, dialkylglycine decarboxylase (DGD), cystathionine beta-lyase and ornithine decarboxylase. No structural similarity has been detected between Tnase and the beta 2 dimer of tryptophan synthase which catalyses the same beta-replacement reaction. The single monovalent cation binding site of Tnase is similar to that of TPL, but differs from either of those in DGD.

Amino Acid Sequence↗

Atomic resolution (0.94 A) structure of Clostridium acidurici ferredoxin. Detailed geometry of [4Fe-4S] clusters in a protein.

The crystal structure of the 2[4Fe-4S] ferredoxin from Clostridium acidurici has been solved using X-ray diffraction data extending to atomic resolution, 0.94 A, recorded at 100 K. The model was refined with anisotropic representation of atomic displacement parameters for all non-hydrogen atoms and with hydrogens riding on their parent atoms. Stereochemical restraints were applied to the protein chain but not to the iron-sulfur clusters. The final R factor is 10.03 % for all data. Inversion of the final least-squares matrix allowed direct estimation of the errors of individual parameters. The estimated errors in positions for protein main chain atoms are below 0.02 A and about 0.003 A for the heavier [4Fe-4S] cluster atoms. Significant differences between the stereochemistry of the two clusters and distortion of both of them from ideal Td tetrahedral symmetry can be defined in detail at this level of accuracy. Regions of alternative conformations include not only protein side chains but also two regions of the main chain. One such region is the loop of residues 25-29, which was highly disordered in the room temperature structure.

Bacterial Proteins↗

Crystal structure of 2'-O-Me(CGCGCG)2, an RNA duplex at 1.30 A resolution. Hydration pattern of 2'-O-methylated RNA.

The molecular and crystal structure of 2'-O-Me (CGCGCG)2 has been determined using synchrotron radiation at near-atomic resolution (1.30 A), the highest resolution to date in the RNA field. The crystal structure is a half-turn A-type helix with some helical parameters deviating from canonical A-RNA, such as low base pair rise, elevated helical twist and inclination angles. In CG steps, inter-strand guanines are parallel while cytosines are not parallel. In steps GC this motif is reversed. This type of regularity is not seen in other RNA crystal structures. The structure includes 44 water molecules and two hydrated Mg2+ions one of which lies exactly on the crystallographic 2-fold axis. There are distinct patterns of hydration in the major and the minor grooves. The major groove is stabilised by water clusters consisting of fused five- and six-membered rings. Minor groove contains only a single row of water molecules; each water bridges either two self-parallel cytosines or two self-parallel guanines by a pair of hydrogen bonds. The structure provides the first view of the hydration scheme of 2'-O-methylated RNA duplex.

Base Composition↗

The crystal structure of a parallel-stranded guanine tetraplex at 0.95 A resolution.

In both DNA and RNA, stretches of guanine bases can form stable four-stranded helices in the presence of sodium or potassium ions. Sequences with a propensity to form guanine tetraplexes have been found in chromosomal telomers, immunoglobulin switch regions, and recombination sites. We report the crystal structure at 0.95 A resolution of a parallel-stranded tetraplex formed by the hexanucleotide d(TG4T) in the presence of sodium ions. The four strands form a right-handed helix that is stabilized by hydrogen-bonding tetrads of co-planar guanine bases. Well-resolved sodium ions are found between and, at defined points, within tetrad planes and are coordinated with the guanine O6 groups. Nine calcium ions have been identified, each with a well-defined hepta-coordinate hydration shell. Hydrogen-bonding water patterns are observed within the tetraplex's helical grooves and clustered about the phosphate groups. Water molecules in the groove may form a hydrogen bond with the O4', and may affect the stacking behavior of guanine. Two distinct stacking arrangements are noted for the guanine tetrads. The thymine bases do not contribute to the four-stranded conformation, but instead stack to stabilize the crystal lattice. We present evidence that the sugar conformation is strained and propose that this originates from forces that optimize guanine base stacking. Discrete conformational disorder is observed at several places in the phosphodiester backbone, which results from a simple crankshaft rotation that requires no net change in the sugar conformation.

Base Composition↗

Molecular basis of agonism and antagonism in the oestrogen receptor.

Oestrogens are involved in the growth, development and homeostasis of a number of tissues. The physiological effects of these steroids are mediated by a ligand-inducible nuclear transcription factor, the oestrogen receptor (ER). Hormone binding to the ligand-binding domain (LBD) of the ER initiates a series of molecular events culminating in the activation or repression of target genes. Transcriptional regulation arises from the direct interaction of the ER with components of the cellular transcription machinery. Here we report the crystal structures of the LBD of ER in complex with the endogenous oestrogen, 17beta-oestradiol, and the selective antagonist raloxifene, at resolutions of 3.1 and 2.6 A, respectively. The structures provide a molecular basis for the distinctive pharmacophore of the ER and its catholic binding properties. Agonist and antagonist bind at the same site within the core of the LBD but demonstrate different binding modes. In addition, each class of ligand induces a distinct conformation in the transactivation domain of the LBD, providing structural evidence of the mechanism of antagonism.

Binding Sites↗

Purification, crystallization and preliminary X-ray analysis of the M.BseCI DNA methyltransferase from Bacillus stearothermophilus.

The DNA methyltransferase M.BseC1 from B. stearothermophilus methylates the N6 atom of the 3' adenine in the sequence 5'-ATCGAT-3'. The 579-residue protein has been isolated and crystallized using seeding and microdialysis techniques. The crystals are monoclinic, space group P2(1) with cell dimensions a = 53.7, b = 85.7, c = 151.8 A and beta = 95.1 degrees, two molecules in the asymmetric unit and diffract to at least 2.5 A resolution.

Journal Article↗

Crystal structure of Escherichia coli inorganic pyrophosphatase complexed with SO4(2-). Ligand-induced molecular asymmetry.

The three-dimensional structure of inorganic pyrophosphatase from Escherichia coli complexed with sulfate was determined at 2.2 A resolution using Patterson's search technique and refmed to an R-factor of 19.2%. Sulfate may be regarded as a structural analog of phosphate, the product of the enzyme reaction, and as a structural analog of methyl phosphate, the irreversible inhibitor. Sulfate binds to the pyrophosphatase active site cavity as does phosphate and this diminishes molecular symmetry, converting the homohexamer structure form (alpha3)2 into alpha3'alpha3". The asymmetry of the molecule is manifested in displacements of protein functional groups and some parts of the polypeptide chain and reflects the interaction of subunits and their cooperation. The significance of re-arrangements for pyrophosphatase function is discussed.

Ammonium Sulfate↗

Brain acetylhydrolase that inactivates platelet-activating factor is a G-protein-like trimer.

The platelet-activating factor PAF (1-O-alkyl-2-acetyl-sn-glycero-3-phosphocholine) is a potent lipid first messenger active in general cell activation, fertilization, inflammatory and allergic reactions, asthma, HIV pathogenesis, carcinogenesis, and apoptosis. There is substantial evidence that PAF is involved in intracellular signalling, but the pathways are poorly understood. Inactivation of PAF is carried out by specific intra- and extracellular acetylhydrolases (PAF-AHs), a subfamily of phospholipases A2 that remove the sn-2 acetyl group. Mammalian brain contains at least three intracellular isoforms, of which PAF-AH(Ib) is the best characterized. This isoform contains a heterodimer of two homologous catalytic subunits alpha1 and alpha2, each of relative molecular mass 26K, and a non-catalytic 45K beta-subunit, a homologue of the beta-subunit of trimeric G proteins. We now report the crystal structure of the bovine alpha1 subunit of PAF-AH(Ib) at 1.7 A resolution in complex with a reaction product, acetate. The tertiary fold of this protein is closely reminiscent of that found in p21(ras) and other GTPases. The active site is made up of a trypsin-like triad of Ser 47, His 195 and Asp 192. Thus, the intact PAF-AH(Ib) molecule is an unusual G-protein-like (alpha1/alpha2)beta trimer.

1-Alkyl-2-acetylglycerophosphocholine Esterase↗

The benefits of atomic resolution.

After a long gestation, the elucidation of the crystal structures of proteins at atomic resolution is now maturing. The use of such data for both refinement and structure solution is advancing space. The necessary technology is generally available, in terms of data collection, computing hardware and software. The structures appearing in the literature mainly relate to demonstration projects on native proteins. The importance of these alone is already obvious. Biologically significant results, in terms of ligand complexes and prosthetic groups, are just starting to emerge.

Algorithms↗