Biomedical subjects
Publications and source records attributed to Yoshio Bando.
An effective method was developed for generation of insulating tubular boron nitride (BN)-sheathed nanostructures. ZnS nanowires and multilayered Si-SiO2 nanowires were successfully sheathed with insulating tubular BN-forming nanocables. Both the semiconductor nanowire cores and the BN sheaths are crystalline with well-uniform morphologies.
Epitaxial semiconducting heterostructures: side-to-side Si-ZnS, Si-ZnSe biaxial nanowires, and sandwichlike ZnS-Si-ZnS triaxial nanowires were grown via a simple two-stage thermal evaporation of mixed SiO and ZnS or SiO and ZnSe powders under a precise temperature control. Each nanowire had a uniform diameter of 40-120 nm and length ranging from several to several tens of micrometers. Subnanowires of Si, ZnS, and ZnSe within them had a diameter of 20-50, 40-60, and 20-50 nm, respectively. The optical property (nanoscale cathodoluminescence) was also investigated from these new structures. It is proposed that the Si nanowires formed through disproportionation of SiO to Si in the first evaporation stage and then served as one-dimensional nanoscale substrates (or templates) for an epitaxial growth of ZnS or ZnSe nanowires in the following thermal evaporation of ZnS or ZnSe powders. The present results suggest that the simple method might be useful for the synthesis of many other heterostructures containing Si and II-VI or III-V semiconducting composite nanowires to meet the growing demands of nanoscale science and technology.
Explore the source record for details and available documents.
A novel tubular form of graphitic boron nitride (BN) displaying a hollow conical-helix was discovered. It was generated via wrapping a single beltlike filament according to the geometry of an Archimedes spiral. Cone apex angles of helical-conical nanotubes (HCNTs) were found to exhibit specific values, each of which refers to a certain coincidence site lattice. A unique structural property of HCNTs was observed, displaying the transformation of apex angles during the annealing process. The observed apex angles were reduced with decreasing annealing temperature, which is in accordance with an estimated HCNT strain energy decrease for a given tubular radius. It is suggested that the curvature and apex angle of a HCNT are determined by a sole dynamic element, that is, enthalpy (DeltaH), whereas the HCNT disclination configuration changes through helical sliding of the filament.
Explore the source record for details and available documents.
ZnS-Zn nanocables and ZnS nanotubes have been synthesized by a thermochemical process in a simple and safe way. The as-prepared nanocables consist of a single crystal Zn core with a diameter of 20 nm and a polycrystalline ZnS sheath with a thickness of 8 nm. The evaporation of the Zn core leads to the formation of ZnS nanotubes.
A hollow conical helix (HCH) of graphitic materials broadens the conical configuration by introduction of wrapping about 120 degrees symmetry positions in addition to the traditional rotation about 60 degrees symmetry sites. Complete structural models are established for a HCH and examined taking into account the rotation mode, coincidence site lattice (CSL), disclination angle and packing pattern. Combined with experimental observations, it is revealed that the size of the CSL, hence the density of the coincidence lattice sites, dominates the overlap configuration of a conical helix.
The 94 kDa glucose-regulated protein (GRP94), the endoplasmic reticulum (ER) resident molecular chaperone, has a role in cell death due to endoplasmic reticulum stress (ER stress). Here, we report that expression of GRP94 was increased in human neuroblastoma cells (SH-SY5Y (SY5Y) cells) exposed to hypoxia/reoxygenation (H/R). H/R mediated death of SY5Y cells was associated with the activation of major cysteine proteases, caspase-3 and calpain, along with an elevated intracellular calcium concentration. Pretreatment with adenovirus-mediated antisense GRP94 (AdGRP94AS) led to reduced viability of SY5Y cells after being subjected to H/R compared with wild-type cells or cells with adenovirus-mediated overexpression of GRP94 (AdGRP94S). These results indicate that suppression of GRP94 is associated with accelerated apoptosis and that expression of GRP94 (as a stress protein) suppresses oxidative stress-mediated neuronal death and stabilizes calcium homeostasis in the ER. We also used gerbils with transient forebrain ischemia to study the role of GRP94 in vivo. Neurons with adenovirus-mediated overexpression of GRP94 were resistant to ischemic damage. These results confirmed that GRP94 could suppress ischemic injury to neurons, suggesting that gene transfer of GRP94 into the brain may have therapeutic potential in the treatment of cerebrovascular disease.
B/N-doped multiwalled C nanotubes were electrically probed by means of a tungsten needle attached to a piezo-driven stage of a high-resolution transmission electron microscope holder. Two-terminal transport measurements were performed in a 'W needle-nanotube-ground' circuit. The I-V curves were recorded in situ while viewing the nanotubes in the imaging mode of the microscope. This allows us to trace nanotube array morphological changes under applied voltage (up to 50 V). Specific manipulation with nanotube assemblies was found to be possible under applied electrical field: attachment of a tiny nanotube bundle to the W needle and extraction of a given nanotube fragment from an entangled complex bunch were achieved. The electrically-probed B/N-doped C nanotubes exhibited alternating B-rich and C-rich B-C-N domains within tubular layers, as revealed by elemental mapping during energy-filtered TEM (Omega filter). At room temperature the nanostructures displayed resistivity (rho) of approximately 1.8 x 10(-5) omegam and linear I-V curves. The key role of a given contact between the probing needle and a nanotube during electrical measurements was particularly verified.
The novel morphology of BN nanotubes with a collapsed structure has been discovered by a metal-catalyzed treatment. The collapse causes the dramatic enlargement of a specific surface area of BN nanotubes and remarkably enhances the hydrogen storage capacity of BN nanotubes.
A novel method, combining chemical vapor deposition and pyrolysis of trimethoxyborane under ammonia atmosphere, has been developed to synthesize spherical boron nitride particles with a uniform diameter distribution from 50 to 400 nm; chemical composition and high-resolution transmission electron microscopy analyses indicate that the sub-micron boron nitride particles exhibit a slightly distorted arrangement of the shell layers.
Aluminum borate microtubes were prepared in excellent yield by annealing the Al(2)O(3)-NaBH(4)-NiCl(2) starting materials at 1050 degrees C under N(2)(H(2)) atmosphere. The tubes are usually open at each end with the outer diameters narrowly distributed at ca. 1 microm. XRD results and TEM analysis identified the composition of these tubes as single-crystal orthorhombic Al(18)B(4)O(33). These newly discovered ceramic microtubes with open ends have a variety of promising applications such as being filled with other materials for protection or for the fabrication of novel composites or filtering media.
Hydrogen uptake capacities of 1.8 and 2.6 wt % were obtained on BN multiwalled nanotubes and bamboo-like nanotubes, respectively, under approximately 10 MPa at room temperature. The preliminary results show that chemical interactions mainly take place between hydrogen and BN. Taking into consideration the uniform semiconducting electronic property and ultimate stable chemical and thermal stability, BN nanotubes may exhibit some interesting possibilities in storing hydrogen. This will also provide some viewpoints on designing the carbon-based hydrogen storage system.
A novel precursor, a mixture of B2O2 and Mg which is generated in situ by reacting B and MgO at 1300 degrees C, can be used to effectively synthesize bulk amounts of pure BN nanotubes with Mg evaporated from the final product; transmission electron microscope observation for the synthesized BN nanotubes indicates that defects present strongly depend on the tube diameter.
Many applications have been found for carbon nanotubes, and we can now add a role as a 'nanothermometer' to this list. We describe how the height of a continuous, unidimensional column of liquid gallium inside a carbon nanotube (up to about 10 micrometres long and about 75 nanometres in diameter) varies linearly and reproducibly in the temperature range 50-500 degrees C, with an expansion coefficient that is the same as for gallium in the macroscopic state. We chose gallium as our thermal indicator because it has one of the greatest liquid ranges of any metal (29.78-2,403 degrees C) and a low vapour pressure even at high temperatures. This nanothermometer should be suitable for use in a wide variety of microenvironments.