Biomedical subjects

Yoshiharu Doi

Publications and source records attributed to Yoshiharu Doi.

At least 19 recordsLinked to original sources

PubMed2006

Effects of mutations in the substrate-binding domain of poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 on PHB degradation.

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 (PhaZ(RpiT1)) adsorbs to denatured PHB (dPHB) via its substrate-binding domain (SBD) to enhance dPHB degradation. To evaluate the amino acid residues participating in dPHB adsorption, PhaZ(RpiT1) was subjected to a high-throughput screening system consisting of PCR-mediated random mutagenesis targeted to the SBD gene and a plate assay to estimate the effects of mutations in the SBD on dPHB degradation by PhaZ(RpiT1). Genetic analysis of the isolated mutants with lowered activity showed that Ser, Tyr, Val, Ala, and Leu residues in the SBD were replaced by other residues at high frequency. Some of the mutant enzymes, which contained the residues replaced at high frequency, were applied to assays of dPHB degradation and adsorption, revealing that those residues are essential for full activity of both dPHB degradation and adsorption. These results suggested that PhaZ(RpiT1) adsorbs on the surface of dPHB not only via hydrogen bonds between hydroxyl groups of Ser in the enzyme and carbonyl groups in the PHB polymer but also via hydrophobic interaction between hydrophobic residues in the enzyme and methyl groups in the PHB polymer. The L441H enzyme, which displayed lower dPHB degradation and adsorption abilities, was purified and applied to a dPHB degradation assay to compare it with the wild-type enzyme. The kinetic analysis of the dPHB degradation suggested that lowering the affinity of the SBD towards dPHB causes a decrease in the dPHB degradation rate without the loss of its hydrolytic activity for the polymer chain.

Amino Acid Sequence↗

PubMed2006

Adsorption of biopolyester depolymerase on silicon wafer and poly[(R)-3-hydroxybutyric acid] single crystal revealed by real-time AFM.

The adsorption behavior of PHB depolymerase from R. pickettii T1 on a silicon wafer and on P(3HB) single crystals has been studied by real-time and AFM in air and a buffer solution. First, the morphology of PHB depolymerase adsorbed on a silicon wafer was characterized to show that one molecule of PHB depolymerase has dimensions of 2.2 +/- 0.7 nm height and 16 +/- 5 nm width. The observation of PHB depolymerase adsorbed on a P(3HB) single crystal indicated that the dimensions of enzyme on the crystalline surface in air were 1.2 +/- 0.5 nm high and 28 +/- 7 nm wide, while enzyme molecules with dimensions of 2.1 +/- 0.6 nm height and 16 +/- 7 nm width were detected in a buffer solution. Comparison of the dimensions of PHB depolymerase in air with those in a buffer solution showed that the enzyme was squashed in air, but not in a buffer solution. In addition, the influence of enzymatic adsorption on the molecular state of the P(3HB) crystalline surface was investigated. The AFM images of P(3HB) single crystals after enzymatic adsorption and washing with ethanol indicated that the adhesion of PHB depolymerase changed the molecular state and generated holes on the crystalline surface.

Adsorption↗

PubMed2006

Phase structure and enzymatic degradation of poly(L-lactide)/atactic poly(3-hydroxybutyrate) blends: an atomic force microscopy study.

Phase structures and enzymatic degradation of poly(l-lactide) (PLLA)/atactic poly(3-hydroxybutyrate) (ata-PHB) blends with different compositions were characterized by using atomic force microscopy (AFM). Differential scanning calorimetry (DSC) thermograms of PLLA/ata-PHB blends with different compositions showed two glass transition temperatures, indicating that the PLLA/ata-PHB blends are immiscible in the melt. Surface morphologies of the thin films for PLLA/ata-PHB blends were determined by AFM. Phase separated morphology was recognized from the AFM topography and phase images. The domain size of the components was dependent on the blend ratio. Enzymatic degradation of the PLLA/ata-PHB blends was performed by using both PHB depolymerase and proteinase K. Either PLLA or ata-PHB domains were eroded depending on the kinds of enzyme. Surface morphologies after enzymatic degradation have revealed the phase structure along the depth direction. Enzymatic adsorption of PHB depolymerase was examined on the surface of PLLA/ata-PHB blends. The enzyme molecules were found on both domains of the binary blends. The larger number of enzyme molecules was found on the PLLA domains relative to those on the ata-PHB domains, suggesting the higher affinity of the enzyme against PLLA domain.

Adsorption↗

PubMed2006

In vivo and in vitro characterization of Ser477X mutations in polyhydroxyalkanoate (PHA) synthase 1 from Pseudomonas sp. 61-3: effects of beneficial mutations on enzymatic activity, substrate specificity, and molecular weight of PHA.

Evolutionary engineered polyhydroxyalkanoate (PHA) synthases from Pseudomonas sp. 61-3 enhance PHA accumulation and enable the monomer composition of PHAs to be regulated. We characterized a newly screened Ser477Arg (S477R) mutant of PHA synthase by in vivo analyses of P(3-hydroxybutyrate) [P(3HB)] homopolymer and P(3HB-co-3-hydroxyalkanoate) [P(3HB-co-3HA)] copolymer productions in the recombinants of Escherichia coli. The results indicated that the S477R mutation contributed to a shift in substrate specificity to smaller monomers containing a 3HB unit rather than to an enhancement in catalytic activity. Multiple mutations of S477R with other beneficial mutations, for example, Ser325Cys, exhibited synergistic effects on both an increase in PHA production (from 9 wt % to 21 wt %) and an alteration of substrate specificity. Furthermore, the effects of complete amino acid substitutions at position 477 were characterized in terms of in vivo PHA production and in vitro enzymatic activity. The five mutations, S477Ala(A)/Phe(F)/His(H)/Arg(R)/Tyr(Y), resulted in a shift in substrate specificity to smaller monomer units. The S477Gly(G) mutant greatly enhanced activity toward all different sizes of substrates with carbon numbers ranging from 4 to 12. These results indicated that the residue 477 contributes to both the catalytic activity and substrate specificity of PHA synthase. In recombinant E. coli, the S477A/F/G/H/R/Y mutations consistently led to increases (up to 6 times that of wild-type enzyme) in weight average molecular weights of P(3HB) homopolymers. On the basis of our studies, we created a structural feasibility accounting for the mutational effects on enzymatic activity and substrate specificity of PHA synthase.

Acyltransferases↗

PubMed2005

The crystal structure of polyhydroxybutyrate depolymerase from Penicillium funiculosum provides insights into the recognition and degradation of biopolyesters.

Polyhydroxybutyrate is a microbial polyester that can be produced from renewable resources, and is degraded by the enzyme polyhydroxybutyrate depolymerase. The crystal structures of polyhydroxybutyrate depolymerase from Penicillium funiculosum and its S39 A mutant complexed with the methyl ester of a trimer substrate of (R)-3-hydroxybutyrate have been determined at resolutions of 1.71 A and 1.66 A, respectively. The enzyme is comprised of a single domain, which represents a circularly permuted variant of the alpha/beta hydrolase fold. The catalytic residues Ser39, Asp121, and His155 are located at topologically conserved positions. The main chain amide groups of Ser40 and Cys250 form an oxyanion hole. A crevice is formed on the surface of the enzyme, to which a single polymer chain can be bound by predominantly hydrophobic interactions with several hydrophobic residues. The structure of the S39A mutant-trimeric substrate complex reveals that Trp307 is responsible for the recognition of the ester group adjacent to the scissile group. It is also revealed that the substrate-binding site includes at least three, and possibly four, subsites for binding monomer units of polyester substrates. Thirteen hydrophobic residues, which are exposed to solvent, are aligned around the mouth of the crevice, forming a putative adsorption site for the polymer surface. These residues may contribute to the sufficient binding affinity of the enzyme for PHB granules without a distinct substrate-binding domain.

Amino Acid Sequence↗

PubMed2005

Interaction between poly[(R)-3-hydroxybutyrate] depolymerase and biodegradable polyesters evaluated by atomic force microscopy.

Adsorption of PHB depolymerase from Ralstonia pickettii T1 to biodegradable polyesters such as poly[(R)-3-hydroxybutyrate] (PHB) and poly(l-lactic acid) (PLLA) was investigated by atomic force microscopy (AFM). The substrate-binding domain (SBD) with histidines within the N-terminus was prepared and immobilized on the AFM tip surface via a self-assembled monolayer with a nitrilotriacetic acid group. Using the functionalized AFM tips, the force-distance measurements for polyesters were carried out at room temperature in a buffer solution. In the case of AFM tips with immobilized SBD and their interaction with polyesters, multiple pull-off events were frequently recognized in the retraction curves. The single rupture force was estimated at approximately 100 pN for both PLLA and PHB. The multiple pull-off events were recognized even in the presence of a surfactant, which will prevent nonspecific interactions, but reduced when using polyethylene instead of polyesters as a substrate. The present results provide that the PHB depolymerase adsorbs specifically to the surfaces of polyesters and that the single unbinding event evaluated here is mainly associated with the interaction between one molecule of SBD and the polymer surface.

Journal Article↗

PubMed2005

Organization of polyhydroxyalkanoate synthase for in vitro polymerization as revealed by atomic force microscopy.

Individual polyhydroxyalkanoate synthase molecules from Ralstonia eutropha (PhaCRe) were directly visualized on highly oriented pyrolytic graphite (HOPG) by atomic force microscopy (AFM). PhaCRe molecule was observed as a spherical particle of 2.9 +/- 0.4 nm in height and 28 +/- 4 nm in width. In vitro polymerization reaction on HOPG was carried out for 5 min by reacting the PhaCRe molecules with (R)-3-hydroxybutyryl-CoA monomers. The reaction product was then observed after the removal of water solution. Several PhaCRe molecules associated with each other to form an assembly, which was attached to a fibrillar structure of ca. 0.2-0.3 nm in height. The fibrillar structure that elongated from the PhaCRe assembly was interpreted as the poly[(R)-3-hydroxybutyrate] polymer chain. High resolution AFM suggested that the PhaCRe assembly was composed of 3-4 subunits of PhaCRe molecules. This was further supported by SDS-PAGE analysis of the cross-linked PhaCRe enzyme. These results suggest that more than two subunits of PhaCRe are necessary for the in vitro polymerization of PHB molecular chains.

Acyltransferases↗

PubMed2005

Uniaxial drawing of poly[(R)-3-hydroxybutyrate]/cellulose acetate butyrate blends and their orientation behavior.

Miscible blends of PHB and CAB were prepared by the solvent-casting method with various blend compositions, and their orientation behavior was investigated during uniaxial drawing. X-ray analysis revealed that the orientation of the crystallizable PHB component in the drawn PHB/CAB blends was changed from c-axis-orientation to a-axis-orientation with increasing CAB content. The a-axis-orientation was a result from the a-axis-oriented crystal growth caused by the intramolecular nucleation and the confined crystal growth. For quantitative assessment of the chain orientation, the Hermans orientation functions of the two respective components were obtained from the polarized FT-IR measurements. The orientation function of pure PHB stretched to 5 times of its initial length was approximately 0.8. However the value decreased rapidly with increasing CAB content, and it turned to a negative value from 30 wt.-% CAB content. This indicates that the PHB chains were aligned perpendicular to the drawing direction. On the contrary, the value of the CAB component remained almost unchanged at about 0.1 regardless of the blend composition and the annealing time, indicating that the CAB chains were constantly oriented parallel to the drawing direction without any chain relaxation. In addition, SAXS analysis suggested that the lamellar stacking direction also changed from parallel to perpendicular in the stretching direction with increasing CAB content.

Algorithms↗

PubMed2005

Isolation and structure determination of complexed poly(3-hydroxyalkanoate) from beet (Beta vulgaris L.).

Complexed poly(3-hydroxyalkanoate)s (cPHAs), one of two types of natural PHAs, occur in both prokaryotes and eukaryotes as a complex with biomacromolecules and could be involved in various physiological functions. In this study, a cPHA-component derived from a complex with calcium polyphosphate was isolated from sugar beet (Beta vulgaris L.) and determined to be a homopolymer composed of 3-hydroxybutyrate. MALDI MS provided the number-average molecular weight (Mn = 9,124 Da) and polydispersity index (PDI = 1.01), showing that beet cPHA has a slightly lower molecular mass than the known Escherichia coli cPHA. In addition, the structural analysis of both end groups showed that (i) 100 mol-% of the carboxyl end is free, while about 30 mol-% of the hydroxyl end is free and about 70 mol-% masked and (ii) the end hydroxyl group is masked by at least six identified short-chain alkanoic and alkanedioic acids. Based on such end-group characteristics, the polymerization mechanism of beet cPHA is discussed.

3-Hydroxybutyric Acid↗

PubMed2005

Crystal structure and morphology of poly(16-hexadecalactone) chain-folded lamellar crystals.

Solution-grown, chain-folded lamellar crystals of poly(16-hexadecalactone) (PHDL) were crystallized isothermally from 1-hexanol at 70 degrees C. The morphology of lozenge-shaped crystals was studied by TEM and AFM. The lamellae are ca. 10 nm thick and the chains run orthogonal to the lamellar surface with folding along (110) and (110) planes. The crystal structure of PHDL was determined by XRD and election diffraction of single crystals. The chains are in the 2(1) helix conformation close to all-trans and the structure consists of an orthorhombic unit cell with a P2(1)2(1)2(1) space group with the lattice constants a = 0.746 +/- 0.001 nm, b = 0.504 +/- 0.001 nm, and c (chain axis) = 4.116 +/- 0.003 nm. There are two chains per unit cell, which exist in an antiparallel arrangement. Molecular packing structure has been studied in detail, taking into account both diffraction data and energy calculations. The setting angles, with respect to a axis, were +/-40 degrees for the corner and center chains, respectively. By using the electron and XRD data, the best molecular packing model was refined to R-factors of 0.168 and 0.196, respectively. A brief comparison of chain-packing structure is also made with related polymer structures.

Crystallization↗

PubMed2005

Enzymatic transformation of bacterial polyhydroxyalkanoates into repolymerizable oligomers directed towards chemical recycling.

The enzymatic transformation into an oligomer was carried out with the objective of developing the chemical recycling of bacterial polyesters. Poly(R-3-hydroxyalkanoate)s (PHAs), such as poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyhexanoate)] and poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyvalerate)], were degraded by granulated Candida antarctica lipase B immobilized on hydrophilic silica (lipase GCA) in a diluted organic solvent at 70 degrees C. The degradation products were cyclic oligomers having a molecular weight of a few hundreds. The obtained cyclic oligomer was readily repolymerized by the same lipase (lipase GCA) to produce the corresponding polyester in a concentrated solution. The cyclic oligomer was copolymerized with epsilon-caprolactone using lipase to produce the corresponding terpolymers having an Mw of 21,000. This is the first example of the enzymatic chemical recycling of bacterial PHAs using lipase. Poly(R-3-hydroxybutyrate) [P(3HB)] was also degraded into the linear-type R-3HB monomer to trimer by P(3HB)-depolymerase (PHBDP) in phosphate buffer at 37 degrees C. The degradation using PHBDP required a longer reaction time compared with the lipase-catalyzed degradation in organic solvent. The monomer composition of the oligomer depended on the origin of the PHBDP. The R-3HB monomer was predominately produced by PHBDP from Pseudomonas stutzeri, while the R-3HB dimer was produced by PHBDP from Alcaligenes faecalis T1. Repolymerization of these oligomers by lipase in concentrated organic solvent produced a relatively low-molecular-weight P(3HB) (e.g., Mw=2,000). Degradation of P(3HB) by lipase in organic solvent into repolymerizable cyclic oligomer and degradation of P(3HB) by PHBDP in buffer into hydroxy acid type R-3HB dimer.

Alcaligenes faecalis↗

PubMed2005

Characterization and properties of G4X mutants of Ralstonia eutropha PHA synthase for poly(3-hydroxybutyrate) biosynthesis in Escherichia coli.

Modification of the type I polyhydroxyalkanoate synthase of Ralstonia eutropha (PhaC(Re)) was performed through systematic in vitro evolution in order to obtain improved PhaC(Re) having an enhanced activity of poly(3-hydroxybutyrate) (PHB) synthesis in recombinant Escherichia coli. For the first time, a beneficial G4D N-terminal mutation important for the enhancement of both PHB content in dry cells and PhaC(Re) level in vivo was identified. Site-directed saturation mutagenesis at the G4 position enabled us to identify other mutations conferring similar enhanced characteristics. In addition, the PHB homopolymer synthesized by most G4X single mutants also had higher molecular weights than that of the wild-type. In vitro enzymatic assays of purified G4D mutant PhaC(Re) revealed that the mutant enzyme exhibited slightly lower activity and reaction efficiency compared to the wild-type enzyme. [diagram in text].

Acyltransferases↗

PubMed2005

Biosynthesis of polyhydroxyalkanoate (PHA) copolymer from fructose using wild-type and laboratory-evolved PHA synthases.

Eleven laboratory-evolved polyhydroxyalkanoate (PHA) synthases which originated from Pseudomonas sp. 61-3 enzyme (PhaC1(Ps)), together with the wild-type enzyme, were applied for PHA synthesis from fructose using Ralstonia eutropha PHB(-)4 as a host strain. The evolved PhaC1(Ps) mutants had amino acid substitution(s) at position 325 and/or position 481. In these mutants, serine-325 (S325) was replaced by cysteine (C) or threonine (T), while glutamine-481 (Q481) was replaced by lysine (K), methionine (M) or arginine (R). All recombinant strains harboring the genes of the evolved PhaC1(Ps) mutants produced a significantly increased amount of PHA (55-68 wt.-%) compared with the one harboring the wild-type gene (49 wt.-%). Particularly, those evolved PhaC1(Ps) mutants having multiple amino acid substitutions showed higher activities for PHA synthesis. Characterization of the PHA by NMR spectroscopy revealed that they were copolymers consisting of (R)-3-hydroxybutyrate (98-99 mol-%) and medium-chain-length comonomers (1-2 mol-%). This study also confirmed that amino acid substitution at position 481 in PhaC1(Ps) led to an increasing molecular weight of PHA. The number-average molecular weight (Mn) of PHA (Mn = 240,000) synthesized by the evolved PhaC1(Ps) (Q481K) mutant was 4.6-fold greater than that (Mn = 52,000) synthesized by the wild-type enzyme.

Acyltransferases↗

PubMed2005

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3- hydroxyhexanoate) from palm oil products in a Wautersia eutropha mutant.

Palm kernel oil, palm olein, crude palm oil and palm acid oil were used for the synthesis of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] by a mutant strain of Wautersia eutropha (formerly Ralstonia eutropha) harboring the Aeromonas caviae polyhydroxyalkanoate (PHA) synthase gene. Palm kernel oil was an excellent carbon source for the production of cell biomass and P(3HB-co-3HHx). About 87% (w/w) of the cell dry weight as P(3HB-co-3HHx) was obtained using 5 g palm kernel oil/l. Gravimetric and microscopic analyses further confirmed the high PHA content in the recombinant cells. The molar fraction of 3HHx remained constant at 5 mol % regardless of the type and concentration of palm oil products used. The small amount of 3HHx units was confirmed by 13C NMR analysis. The number average molecular weight (M(n)) of the PHA copolymer produced from the various palm oil products ranged from 27 0000 to 46 0000 Da. The polydispersity was in the range of 2.6-3.9.

3-Hydroxybutyric Acid↗

PubMed2005

Site-directed saturation mutagenesis at residue F420 and recombination with another beneficial mutation of Ralstonia eutropha polyhydroxyalkanoate synthase.

The F420S substitution enhances the specific activity of Ralstonia eutropha PHA synthase (PhaCRe). We have now carried out site-directed saturation mutagenesis of F420 of PhaCRe and, amongst the F420 mutants, the F420S mutant gave the highest poly(3-hydroxybutyrate) (PHB) content. In vitro activity assay showed that the F420S enzyme had a significant decrease in its lag phase compared to that of the wild-type enzyme. Enhancement of PHB accumulation was achieved by combination of the F420S mutation with a G4D mutation, which conferred high PHB content and high in vivo concentration of PhaCRe enzyme. The G4D/F420S mutant gave a higher PHB content and in vivo concentration of PhaCRe enzyme than the F420S mutant, while the molecular weight of the PHB polymer of the double mutant was similar to that of the F420S mutant.

Acyltransferases↗

PubMed2005

Expression of 3-ketoacyl-acyl carrier protein reductase (fabG) genes enhances production of polyhydroxyalkanoate copolymer from glucose in recombinant Escherichia coli JM109.

Polyhydroxyalkanoates (PHAs) are biologically produced polyesters that have potential application as biodegradable plastics. Especially important are the short-chain-length-medium-chain-length (SCL-MCL) PHA copolymers, which have properties ranging from thermoplastic to elastomeric, depending on the ratio of SCL to MCL monomers incorporated into the copolymer. Because of the potential wide range of applications for SCL-MCL PHA copolymers, it is important to develop and characterize metabolic pathways for SCL-MCL PHA production. In previous studies, coexpression of PHA synthase genes and the 3-ketoacyl-acyl carrier protein reductase gene (fabG) in recombinant Escherichia coli has been shown to enhance PHA production from related carbon sources such as fatty acids. In this study, a new fabG gene from Pseudomonas sp. 61-3 was cloned and its gene product characterized. Results indicate that the Pseudomonas sp. 61-3 and E. coli FabG proteins have different substrate specificities in vitro. The current study also presents the first evidence that coexpression of fabG genes from either E. coli or Pseudomonas sp. 61-3 with fabH(F87T) and PHA synthase genes can enhance the production of SCL-MCL PHA copolymers from nonrelated carbon sources. Differences in the substrate specificities of the FabG proteins were reflected in the monomer composition of the polymers produced by recombinant E. coli. SCL-MCL PHA copolymer isolated from a recombinant E. coli strain had improved physical properties compared to the SCL homopolymer poly-3-hydroxybutyrate. This study defines a pathway to produce SCL-MCL PHA copolymer from the fatty acid biosynthesis that may impact on PHA production in recombinant organisms.

3-Oxoacyl-(Acyl-Carrier-Protein) Reductase↗

PubMed2004

Mutation effects of a conserved alanine (Ala510) in type I polyhydroxyalkanoate synthase from Ralstonia eutropha on polyester biosynthesis.

Type I polyhydroxyalkanoate (PHA) synthases, as represented by Ralstonia eutropha enzyme (PhaC(Re)), have narrow substrate specificity toward (R)-3-hydroxyacyl-coenzyme A with acyl chain length of C3-C5 to yield PHA polyesters. In this study, saturation point mutagenesis of a highly conserved alanine at position 510 (A510) in PhaC(Re) was carried out to investigate the effects on the polymerization activity and the substrate specificity for in vivo PHA biosynthesis in bacterial cells. A series of saturation mutants were first applied for poly[(R)-3-hydroxybutyrate] homopolymer synthesis in Escherichia coli and R. eutropha PHB(-)4 (PHA negative mutant) cells to assess the polymerization activity. All mutants showed quantitatively similar polymerization activities when R. eutropha PHB(-)4 was used for assay, whereas several mutants such as A510P showed low activities in E. coli. Further analysis has revealed that majority of mutants synthesize polyesters with higher molecular weights than the wild-type. In particular, substitution by acidic amino acids, A510D(E), led to remarkable increases in molecular weights. Subsequently, PHA copolymer synthesis from dodecanoate (C12 fatty acid) was examined. The copolymer compositions were varied depending on the mutants used. Significant increased fractions of long monomer units (C6 and C8) in PHA copolymers were observed for three mutants [A510M(Q,C)]. From these results, the mutations at this potion are beneficial to change the molecular weight of polyesters and the substrate specificity of PhaC(Re). Molecular weight distributions of PHA polymers synthesized by the wild-type enzyme (PhaC(Re)) and its mutants.

Acyltransferases↗

PubMed2004

In-situ atomic force microscopy observation of enzymatic degradation in poly(hydroxyalkanoic acid) thin films: normal and constrained conditions.

The enzymatic degradation of lamellar crystals in poly(hydroxyalkanoic acid) thin films has been visualized by using in-situ dynamic force mode (tapping mode) atomic force microscopy (AFM) in buffer solution. It was found that poly(hydroxybutyric acid) (PHB) depolymerase from Ralstonia pickettii T1 degraded the thin surface layers formed at room temperature first, and that lamellar crystals formed at the crystallization temperature (110 degrees C) were eroded from the crystallographic a-axis to show splintered morphologies at the tips of the crystals. In some cases, lamellar crystals were hydrolyzed from the crystallographic b-axis, resulting in the formation of small crevices. These results suggest that disordered molecular chain-packing regions exist in the crystal along the crystallographic a- and b-axes, and that enzymatic degradation predominantly occurs from these defective regions. In addition, cantilever-tip-induced enzymatic degradation was carried out in the presence of PHB depolymerase. A concave area was artificially formed on the stacked lamellar crystals by the AFM tip. In-situ AFM observation has revealed that enzymatic degradation proceeds along both the longitudinal and lateral directions of the lamellae. At the same time, the PHB depolymerase preferentially eroded the concave area along the crystallographic c-axis. These results demonstrated that the PHB depolymerase predominantly degrades the less-ordered molecular chain-packing regions in the crystals.

3-Hydroxybutyric Acid↗